Temperature control system for infant incubator using DS18B20 sensor

Authors

  • Laila Katriani
  • Arif Setiawan
  • Denny Darmawan

DOI:

https://doi.org/10.21831/jsd.v3i2.4098

Abstract

A temperature control system for infant incubator using DS18B20 had been built. The dimension of the incubator was 45 x 35 x 35 cm3 and it used 200 W incandescent lamp as an heater element. The system was automated using ATMEGA328P and Triac as an actuator. It succeeded in keeping the incubator temperature at (36.5 ± 0.1) °C. It took around 10 minutes to reach the working temperature of 36.5 °C from room temperature of 26 °C.

 

Key words: temperature control system, infant incubator, DS18B20

Downloads

How to Cite

[1]
Katriani, L. et al. 2015. Temperature control system for infant incubator using DS18B20 sensor. Jurnal Sains Dasar. 3, 2 (Apr. 2015). DOI:https://doi.org/10.21831/jsd.v3i2.4098.

Issue

Vol. 3 No. 2 (2014): October 2014

Section

Articles

License

Authors who publish with this journal agree to the following terms:

 

  1. Copyright of the published articles will be hold by the authors.

  2. Publisher of JSD is Universitas Negeri Yogyakarta

  3. The copyright follows Creative Commons Attribution–ShareAlike License (CC BY SA): This license allows to Share "” copy and redistribute the material in any medium or format, Adapt "” remix, transform, and build upon the material, for any purpose, even commercially.

 
 Creative Commons License