Industrial practice platform based on work-based learning: A solution to improve student competence

Authors

DOI:

https://doi.org/10.21831/jpv.v13i1.54589

Keywords:

Industry, platform, student, work-based learning

Abstract

This study aims to (1) Develop a work-based learning-based industrial practicum platform; (2) Know the feasibility of a work-based learning-based industrial practicum platform; and (3) Know whether there is an effectiveness of student learning with a work-based learning-based industrial practicum platform. This type of research is Research and Development (R&D) with the Four-D model, and the research subjects are class C students as an experimental class with a total of 21 students and class B students as a control class with a total of 22 students. Data collection uses a questionnaire method to determine the feasibility of the media used for research and written test questions in the form of multiple choice with a total of 20 questions. The data analysis test used a normality test, homogeneity test, and t-test. The research data showed that: (1) The procedure for developing practical learning media based on work-based learning includes the defining stage, planning stage, development stage, and dissemination stage; (2) Work-based learning media is feasible to use as a learning media in light vehicle electrical maintenance subjects. This can be proven from the validation results of media expert lecturers who showed 82.50% of the score indicating valid criteria. Validation by material expert lecturers showed 78.75% of the score obtained, indicating quite valid criteria; and (3) The t-test results (t-count = 6.021 and p = 0.000) prove that the work-based learning-based practicum platform made is effective for improving student learning outcomes. This is shown through the response of trial students, which includes small group trials, obtaining 77%, which includes five students, and large group trials, obtaining 80.50%, which includes 15 students. The normality test obtained p = 0.059 in the control class and p = 0.115 in the experimental class because p> 0.05 indicates that both groups are normally distributed. Through the homogeneity test, F count = 0.762 with p = 0.388 because p > 0.05, the two groups have homogeneous variants. Thus, the industrial platform practice based on work-based learning can improve student learning outcomes.

Author Biographies

Dwi Jatmoko, Universitas Muhammadiyah Purworejo

Aci Primartadi, Universitas Muhammadiyah Purworejo

Zahidah Ab-Latif, Universiti Pendidikan Sultan Idris

References

Abdullah, M. H., Sulong, M. A., & Rahim, M. A. (2020). Development and validation of the music education teaching practice E-supervision system using the google classroom application. International Journal of Innovation, Creativity and Change, 11(10), 102–116. https://www.researchgate.net/profile/Mohd-Abdullah-14/publication/340264563_Development_and_Validation_of_the_Music_Education_Teaching_Practice_E-Supervision_System_Using_the_Google_Classroom_Application/links/5e80ae9e299bf1a91b87ec10/Development-and-Vali

Agavelyan, R. O., Aubakirova, S. D., Zhomartova, A. D., & Burdina, E. I. (2020). Teachers' attitudes towards inclusive education in Kazakhstan. Integration of Education, 24(1), 8–19. https://doi.org/10.15507/1991-9468.098.024.202001.008-019

Agustina, P., Muhdhar, M. H. I. Al, & Amin, M. (2017). Integration of life skills in environment material module to elevate learning achievement. Jurnal Kependidikan: Penelitian Inovasi Pembelajaran, 1(2), 291–305. https://doi.org/10.21831/jk.v1i2.9581

Alfarsi, G., Sulaiman, H., Tawafak, R. M., Malik, S., Jabbar, J., & Alsidiri, A. (2020). A study of learning management system with e-learning. International Journal of Advanced Science and Technology, 29(3), 4884–4890. https://www.researchgate.net/profile/Ghaliya-Alfarsi/publication/339939292_A_Study_of_Learning_Management_System_with_E-Learning/links/6004121f92851c13fe18059d/A-Study-of-Learning-Management-System-with-E-Learning.pdf

Allan, D. (2014). Dealing with disaffection: The influence of work-based learning on 14–16-year-old students' attitudes to school. Empirical Research in Vocational Education and Training, 6(1), 1–18. https://doi.org/10.1186/s40461-014-0010-4

Ariyanti, K. D., Mon, A. A., Ekohariadi, E., & Anifah, L. (2018). Effect of problem-based learning model and motivation toward learning outcomes on network routing. Jurnal Pendidikan Teknologi Dan Kejuruan, 24(2), 270–277. https://doi.org/10.21831/jptk.v24i2.20005

Bagila, S., Kok, A., Zhumabaeva, A., Suleimenova, Z., Riskulbekova, A., & Uaidullakyzy, E. (2019). Teaching primary school pupils through audio-visual means. International Journal of Emerging Technologies in Learning (IJET), 14(22), 122–140. https://doi.org/10.3991/ijet.v14i22.11760

Banjongprasert, J., Verawat, A., & Petampai, S. (2019). Higher education branding: Towards a higher education branding: Conceptualizing and measuring factors influencing choice of study programme. International Journal of Advanced Science and Technology, 28(14), 454–460. http://sersc.org/journals/index.php/IJAST/article/view/1513

Billett, S. (2011). Vocational education. Springer Netherlands. https://doi.org/10.1007/978-94-007-1954-5

Coghlan, A. (2011). A little book of R for multivariate analysis. Wellcome Sanger Institute. https://raw.githubusercontent.com/avrilcoghlan/LittleBookofRMultivariateAnalysis/master/_build/latex/MultivariateAnalysis.pdf

Cuendet, S., Dehler-Zufferey, J., Arn, C., Bumbacher, E., & Dillenbourg, P. (2014). A study of carpenter apprentices' spatial skills. Empirical Research in Vocational Education and Training, 6(1), 3. https://doi.org/10.1186/s40461-014-0003-3

Dhahir, Z. S., Hussein, P., & Mangj, S. M. (2020). Develop an electronic testing system using artificial intelligence. International Journal of Advanced Science and Technology, 29(3), 599–609. https://www.researchgate.net/profile/Syefy-Mohammed/publication/342477511_Develop_an_Electronic_Testing_System_Using_Artificial_Intelligence/links/5ef62207299bf18816e85b5b/Develop-an-Electronic-Testing-System-Using-Artificial-Intelligence.pdf

Dragicevic, T., Wheeler, P., & Blaabjerg, F. (2019). Artificial intelligence aided automated design for reliability of power electronic systems. IEEE Transactions on Power Electronics, 34(8), 7161–7171. https://doi.org/10.1109/TPEL.2018.2883947

Fatah, A., & Sudiyanto, S. (2018). Pengaruh media pembelajaran berbasis IT terhadap aktivitas dan prestasi belajar siswa SMK bidang otomotif di Sleman dan Yogyakarta. Jurnal Pendidikan Vokasi Otomotif, 1(1), 54–65. https://doi.org/10.21831/jpvo.v1i1.21783

Fathia, N. F., Hanafi, I., & Rif'an, M. (2018). Development of microprocessor learning media using zilog z-80 for vocational school students of electronic engineering expert program. Jurnal Pendidikan Vokasi, 8(3), 238–248. https://doi.org/10.21831/jpv.v8i3.20795

Fjellstrí¶m, M. (2014). Vocational education in practice: a study of work-based learning in a construction programme at a Swedish upper secondary school. Empirical Research in Vocational Education and Training, 6(1), 1–20. https://doi.org/10.1186/1877-6345-6-2

Gagne, R. M. (1970). Learning theory, educational media, and individualized instruction. https://files.eric.ed.gov/fulltext/ED039752.pdf

Haryanto, H., Kusuma, W. M., Mutohhari, F., Nurtanto, M., & Suyitno, S. (2021). Innovation media learning: Online Project-Based Learning (O-PBL) on drawing competence in automotive engineering using video on YouTube. Journal of Physics: Conference Series, 2111(1), 012020. https://doi.org/10.1088/1742-6596/2111/1/012020

Hof, S., & Leiser, M. S. (2014). Teaching in vocational education as a second career. Empirical Research in Vocational Education and Training, 6(1), 8. https://doi.org/10.1186/s40461-014-0008-y

Kholifah, N., Sudira, P., Rachmadtullah, R., Nurtanto, M., & Suyitno, S. (2020). The effectiveness of using blended learning models against vocational education student learning motivation. International Journal of Advanced Trends in Computer Science and Engineering, 9(5), 7964–7968. https://doi.org/10.30534/ijatcse/2020/151952020

Mubarak, I., Warju, W., Isnantyo, F. D., & Nurtanto, M. (2020). Enhancing the learning outcomes of automotive electrical wiring diagram through Android simulation - A conceptual design for automotive vocational school. International Journal of Psychosocial Rehabilitation, 24(8), 10694–10705. https://www.researchgate.net/publication/341725901_Enhancing_the_Learning_Outcomes_of_Automotive_Electrical_Wiring_Diagram_through_Android_Simulation_-A_Conceptual_Design_for_Automotive_Vocational_School

Nghia, T. L. H., & Duyen, N. T. M. (2019). Developing and validating a scale for evaluating internship-related learning outcomes. Higher Education, 77(1), 1–18. https://doi.org/10.1007/s10734-018-0251-4

Nurtanto, M., Sofyan, H., Pardjono, P., & Suyitno, S. (2020). Development model for competency improvement and national vocational qualification support frames in automotive technology. International Journal of Evaluation and Research in Education (IJERE), 9(1), 168–176. https://doi.org/10.11591/ijere.v9i1.20447

Purnamawati, P., Akil, M., & Nuridayanti, N. (2021). Analysis of needs for the development of trainer sensor and transducer learning media based on Internet of Things (IoT). Jurnal Pendidikan Vokasi, 11(2), 232–242. https://doi.org/10.21831/jpv.v11i3.43833

Sakulviriyakitkul, P., Sintanakul, K., & Srisomphan, J. (2020). The design of a learning process for promoting teamwork using project-based learning and the concept of agile software development. International Journal of Emerging Technologies in Learning (IJET), 15(3), 207–222. https://doi.org/10.3991/ijet.v15i03.10480

Sarwandi, S., Giatman, M., Sukardi, S., & Irfan, D. (2019). Developing mobile-based project-based learning module for project management courses in vocational education. Jurnal Pendidikan Vokasi, 9(2), 207–216. https://doi.org/10.21831/jpv.v9i2.25947

Sofyan, H., Anggereini, E., Muazzomi, N., & Larasati, N. (2020). Developing an electronic module of local wisdom based on the area learning model at Kindergarten Jambi city. International Journal of Innovation, Creativity and Change, 11(2), 216–231. https://ijicc.net/images/vol11iss2/11215_Sofyan_2020_E_R.pdf

Sugiyono, S. (2017). Metode penelitian dan pengembangan untuk bidang pendidikan, manajemen, sosial, teknik: Research and development/R&D. Alfabeta.

Sukardi, S., Mayefis, R., & Usmeldi, U. (2020). Effectiveness of mobile learning media on computer assembly at vocational high school. Journal of Physics: Conference Series, 1594(1), 012012. https://doi.org/10.1088/1742-6596/1594/1/012012

Suprihatiningrum, J. (2016). Persepsi siswa difabel terhadap praktik pendidikan inklusif di SMA inklusi di Yogyakarta. INKLUSI, 3(2), 225–244. https://doi.org/10.14421/ijds.030204

Suyitno, S., Jatmoko, D., Ardiansyah, N., & Anitasar, M. (2019). Automotive electrical learning module to improve students interest and learning achievement of vocational school. Proceedings of the International Conference of Science and Technology for the Internet of Things. https://doi.org/10.4108/eai.19-10-2018.2281288

Suyitno, S., Kamin, Y., Jatmoko, D., Nurtanto, M., & Sunjayanto, E. (2022). Industrial apprenticeship model based on work-based learning for pre-service teachers in automotive engineering. Frontiers in Education, 7, 865064. https://doi.org/10.3389/feduc.2022.865064

Suyitno, S., & Pardjono, P. (2018). Integrated work-based learning (I-WBL) model development in light vehicle engineering competency of vocational high school. Jurnal Pendidikan Vokasi, 8(1), 1–11. https://doi.org/10.21831/jpv.v8i1.14360

Suyitno, S., Widianto, I., & Masrul, S. B. (2018). Development of learning media for the course of two-stroke gasoline motors to improve students' learning outcomes. Jurnal Pendidikan Teknologi Dan Kejuruan, 24(1), 83–90. https://doi.org/10.21831/jptk.v24i1.18008

Syahril, S., Nabawi, R. A., & Prasetya, F. (2020). The instructional media development of mechanical drawing course based on project-based learning. International Journal of Innovation, Creativity and Change, 11(4), 309–325. https://www.ijicc.net/images/vol11iss4/11424_Syahril_2020_E1_R1.pdf

Thiagarajan, S., Semmel, D. S., & Semmel, M. I. (1974). Instructional development for training teachers of exceptional children: A sourcebook. National Center for Improvement Educational System.

Walpole, R. E., Myers, R. H., Myers, S. L., & Ye, K. (2012). Probability & statistics for engineers & scientists (9th ed.). Prentice Hall. https://spada.uns.ac.id/pluginfile.php/221008/mod_resource/content/1/ProbabilityStatistics_for_EngineersScientists%289th_Edition%29_Walpole.pdf

Downloads

Published

2023-10-16

How to Cite

Suyitno, S., Jatmoko, D., Primartadi, A., & Ab-Latif, Z. (2023). Industrial practice platform based on work-based learning: A solution to improve student competence. Jurnal Pendidikan Vokasi, 13(1), 98–106. https://doi.org/10.21831/jpv.v13i1.54589

Issue

Vol. 13 No. 1 (2023)

Section

Articles

Citation Check

License

Upon acceptance of the manuscript, the corresponding author will be required to complete and sign the Jurnal Pendidikan Vokasi Publishing Agreement before the article proceeds to publication.

The Publishing Agreement Form can be downloaded here:

Jurnal Pendidikan Vokasi Publishing Agreement

The signed agreement should be submitted electronically to the Editorial Office via email:

jpvokasi@uny.ac.id

Authors retain the copyright of their work while granting Jurnal Pendidikan Vokasi a non-exclusive license to publish, distribute, and identify itself as the original publisher of the article.

All articles published by Jurnal Pendidikan Vokasi are licensed under the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0), which permits unrestricted use, distribution, adaptation, and reproduction in any medium, provided that appropriate credit is given to the original author(s), a link to the license is provided, and any derivative works are distributed under the same license.

Creative Commons License

Jurnal Pendidikan Vokasi by http://journal.uny.ac.id/index.php/jpv is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Similar Articles

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 > >> 

You may also start an advanced similarity search for this article.