Developing conveyor trainer kit for programmable logic controllers in practical learning

Sukir Sukir; Soenarto Soenarto; Soeharto Soeharto

doi:10.21831/jpv.v7i3.15352

Developing conveyor trainer kit for programmable logic controllers in practical learning

Sukir Sukir, Universitas Negeri Yogyakarta, Indonesia
Soenarto Soenarto, Universitas Negeri Yogyakarta, Indonesia
Soeharto Soeharto, Universitas Negeri Yogyakata, Indonesia

10.21831/jpv.v7i3.15352

Abstract

The research aims: (1) to produce conveyor trainer kit equipped with a monitoring system along with its work performance, (2) to know the appropriateness and effectiveness of the use of conveyor trainer kit and module of PLC practical learning. This study is a development research using ADDIE model based on Branch, RB. The steps of this study are: analysis, designing, developing, implementation, and evaluation. Data collection is conducted through observation, survey, and test by using the instruments: observation sheets, questionnaire, and examination. The data are analyzed descriptively using nonparametric test of difference by Mann Whitney. The finding shows: (1) the product of conveyor trainer kit equipped with monitoring system has good work performance; (2) conveyor trainer kit and the module are very appropriate, and the implementation of conveyor trainer kit and module of PLC practical learning can improve student learning outcomes in cognitive, psychomotor, and affective aspects effectively.

Keywords

trainer kit; conveyor; programmable logic controllers

Full Text:

Fulltext PDF

References

Aras, M. S. M., & Azis, F. A. (2014). ROV trainer kit for education purposes. International journal of science and research (IJSR), 3(5).

Fatkhurrokhman, M., Permata, E., Ekawati, R., & Rizal, S. (2017). Pengembangan perangkat pembelajaran teknik digital berbasis project based learning di jurusan pendidikan teknik elektro. Jurnal Pendidikan Vokasi, 7(1), 101-109. doi:http://dx.doi.org/10.21831/jpv.v7i1.1 2547

Gill, K. J. S., Kumar, R., & Kumar, S. (2015). Designing and fabrication of electro- pneumatic trainer kit. International Conference on Advanced Research and Innovation (ICARI-2015), India, p.59- 66.

Hamid, M., Aribowo, D., & Desmira, D. (2017). Development of learning modules of basic electronics-based problem solving in Vocational Secondary School. Jurnal Pendidikan Vokasi, 7(2), 149-157. doi:http://dx.doi.org/10.21831/jpv.v7i2.1 2986

Hidayat, R. & Sumardi. (2013). Perancangan human machine interace (HMI) pada hitcut machine dengan PLC Omron Sysmac CPIL. Semarang: Universitas Diponegoro.

Hong, T. S., Hong, T. H., Samin, R., Sulaiman, S., & Khaksar, W. (2013). Development of an Educational Robotic Training Kit. Advanced Science Letters, 19(11), 3304-3306(3).

Jamaluddin, H., Ghani, J. A., Rahman, M. N. A., & Deros, B. M. (2014). Development of Training Kit for Learning Taguchi Method and Design of Experiments. Jurnal Teknologi (Sciences & Engineering) 68(4), 19–25.

Naseer, M. (2009). Best protection conveyor safety. Cubee: Alberta.

Ranjit, S. S. S., Anas, S. A., Subramaniam, S.K., Tan, C.F., & Chuah, S.H. (2012). Development of solar educational trainer kit. International journal of engineering and innovative technology (IJEIT), 2(3).

Rauner, F., Maclean, R., Pabst, A., & Zimmer, G. (2008). Handbook of technical and vocational education and training research. Bremen: Springer Science Business Media.

Samanol, S. B., Hamid, S. B. A, & Ramli, M. N. B. (2014). Development of Pneumatic Trainer Kit For Polytechnic Student. Journal of Mechanical Manufacturing (J-Mfac), 1. 178-183.

Sean, C. (2015). BeRobot-The Robotic Scientific Education Development Kits. Lovotics, an Open Access Journal,3(1). p. 1-4.

Zimmerman, G. P. (2008). Programmable logic controllers and ladder logic. South Dakota: Department of Humanities South Dakota School of Mines and Technology.

DOI: https://doi.org/10.21831/jpv.v7i3.15352