Development of interactive media sheet metal design modeling based on software Autodesk Inventor Professional 2023

Deni kusuma Adi Pangestu, Universitas Negeri Malang, Indonesia
Widiyanti Widiyanti, Universitas Negeri Malang, Indonesia
Poppy Puspitasari, Universitas Negeri Malang, Indonesia
Agus Suyetno, Universitas Negeri Malang, Indonesia

Abstract


This research and development aims to produce learning media products presented interactively and practically based on Autodesk Inventor Professional 2023 student version software and analyze the feasibility level of learning media for CAD Manufacturing Drawing Techniques subjects to improve competence in the field of machining techniques at SMK Negeri 1 Kediri. The type of research used is research and development (R&D) using the Borg and Gall model, It involved 6 students for the small-scale testing and 32 students for the large-scale testing. Based on the data obtained and descriptive analysis, among others, the results of media expert validation were 98.44%, material expert validation was 89.28%, small-scale trials were 92.08%, and operational trial results were 91.09%. These results indicate that the interactive learning media product sheet metal design modeling meets the criteria very well and can be utilized as a learning tool.

Keywords


Media interactive; Borg and Gall; Sheet metal design modeling; Computer-aided design (CAD)

References


Amin, N. F., Garancang, S., Abunawas, K., Makassar, M., Negeri, I., & Makassar, A. (2023). Konsep umum populasi dan sampel dalam penelitian. Jurnal Pilar: Perspective of Contemporary Islamic Studies , 14(1), 15–31. https://journal.unismuh.ac.id/index.php/pilar/article/view/10624

Ardianti, T. R., & Susanti, S. (2022). Pengembangan media pembelajaran interaktif berbasis Android pada mata pelajaran akuntansi keuangan SMK. Edukatif : Jurnal Ilmu Pendidikan, 4(2), 2879-2892. https://doi.org/10.31004/edukatif.v4i2.2618

Aulia, H., Hafeez, M., Mashwani, H. U., Careemdeen, J. D., Mirzapour, M., & Syaharuddin. (2024). The role of interactive learning media in enhancing student engagement and academic achievement. International Seminar on Student Research in Education, Science, and Technology, 1, 57–67. https://journal.ummat.ac.id/index.php/issrectec/article/view/22378

Bagyo, R., & Ngadiyono, Y. (2020). Relevansi kurikulum CAD SMK bidang keahlian teknik pemesinan dengan kebutuhan dunia usaha dan industri. Jurnal Dinamika Vokasional Teknik Mesin, 5(1), 51–56. https://doi.org/10.21831/dinamika.v5i1.30995

Berselli, G., Bilancia, P., & Luzi, L. (2020). Project-based learning of advanced CAD/CAE tools in engineering education. International Journal on Interactive Design and Manufacturing, 14(3), 1071–1083. https://doi.org/10.1007/s12008-020-00687-4

Daryanes, F., Darmadi, D., Fikri, K., Sayuti, I., Rusandi, M. A., & Situmorang, D. D. B. (2023). The development of Articulate Storyline interactive learning media based on case methods to train student’s problem-solving ability. Heliyon, 9(4), 1-14. https://doi.org/10.1016/j.heliyon.2023.e15082

Fakhruddin, M. T., Sahrina, A., Hari Utomo, D., & Deffinika, I. (2024). Development of digital learning media based on the GlideApps. Jurnal Inovasi Teknologi Pendidikan, 11(2), 132–145. https://doi.org/10.21831/jitp.v11i2.60995

Fathoni, M. I., & Marpanaji, E. (2018). Pengembangan e-book interaktif mata pelajaran teknologi informasi dan komunikasi (TIK) untuk SMK kelas X. Jurnal Inovasi Teknologi Pendidikan, 5(1), 70–81. https://doi.org/10.21831/jitp.v5i1.17149

Gall, M. D., Borg, W. R., & Gall, J. P. (2003). Educational research (7th ed.). Library of Congress Cataloging-in-Publication Data.

Gondoputranto, O., & Purnomo, J. (2020). Implementasi pemakaian sistem CAD dan CAM pada industri apparel. pp. 67–75. https://dspace.uc.ac.id/bitstream/handle/123456789/5764/Paper5764.pdf?sequence=3&isAllowed=y

Haleem, A., Javaid, M., Qadri, M. A., & Suman, R. (2022). Understanding the role of digital technologies in education: A review. Sustainable Operations and Computers, 3, 275–285. https://doi.org/10.1016/j.susoc.2022.05.004

Juliana, I., & Sulistyowati, R. (2023). Pengembangan e-modul interaktif berbasis aplikasi book creator mata pelajaran produk kreatif dan kewirausahaan kelas XII BDP SMK PGRI 13 Surabaya. Jurnal Pendidikan Ekonomi (JUPE), 11(3), 328–334. https://doi.org/10.26740/jupe.v11n3.p328-334

Kristian, D., Yoto, Y., & Widiyanti, W. (2023). Evaluasi pelaksanaan teaching factory SMK swasta di Kota Malang. Jurnal Teknik Mesin Dan Pembelajaran, 6(1), 1-10. https://doi.org/10.17977/um054v6i1p1-10

Listiyono, H., Sunardi, S., Utomo, A. P., & Mariana, N. (2022). Pengaruh kemudahan penggunaan dan kemanfaatan learning management system (LMS) terhadap niat penggunaan e-learning. Jurnal Sisfokom (Sistem Informasi dan Komputer), 11(2), 208–213. https://doi.org/10.32736/sisfokom.v11i2.1419

Maolani, I., Sumardi, K., & Berman, E. T. (2022). Media pembelajaran perpipaan sistem refrigerasi berbasis aplikasi Android. Jurnal Inovasi Teknologi Pendidikan, 9(3), 267–276. https://doi.org/10.21831/jitp.v9i3.54103

Mardhiyah, R., Aldriani, S., Chitta, F., & Zulfikar, M. (2021). Pentingnya keterampilan belajar di abad 21 sebagai tuntutan dalam pengembangan sumber daya manusia. Lectura: Jurnal Pendidikan, 12(1), 29–40. https://doi.org/10.31849/lectura.v12i1.5813

Miaz, Y., Helsa, Y., Zuardi, Yunisrul, Febrianto, R., & Erwin, R. (2019). The development of interactive multimedia-based instructional media for elementary school in learning social sciences. Journal of Physics: Conference Series, 1321(3), 1-5. https://doi.org/10.1088/1742-6596/1321/3/032107

Myori, D. E., Chaniago, K., Hidayat, R., Eliza, F., & Fadli, R. (2019). Peningkatan kompetensi guru dalam penguasaan teknologi informasi dan komunikasi melalui pelatihan pengembangan media pembelajaran berbasis Android. JTEV (Jurnal Teknik Elektro Dan Vokasional), 5(2), 102-109. https://doi.org/10.24036/jtev.v5i2.106832

Noviyanta, R., & Ngadiyono, Y. (2019). Pembuatan media pembelajaran video tutorial mata pelajaran gambar manufaktur di SMK N 2 Pengasih. Jurnal Pendidikan Vokasional Teknik Mesin, 7(3), 151–160. https://doi.org/10.21831/teknik%20mesin.v7i3.15203

Pelliccia, L., Bojko, M., Prielipp, R., & Riedel, R. (2021). Applicability of 3D-factory simulation software for computer-aided participatory design for industrial workplaces and processes. Procedia CIRP, 99, 122–126. https://doi.org/10.1016/j.procir.2021.03.019

Permitasari, M. A., Hartono, H., & Sugito, S. (2022). Pengembangan modul multimedia interaktif pendidikan kewirausahaan pada industri rumahan untuk SMALB Tunagrahita. Jurnal Inovasi Teknologi Pendidikan, 9(1), 49–60. https://doi.org/10.21831/jitp.v9i1.44927

Pratama, M. P., Ruruk, S., & Karuru, P. (2023). Validity of interactive learning media in computer basics course. Jurnal Inovasi Teknologi Pendidikan, 10(4), 353–362. https://doi.org/10.21831/jitp.v10i4.60376

Purniawan & Sumarni, W. (2023). Analisis respon siswa pada pembelajaran daring di masa pandemi COVID 19. Jurnal Keguruan dan Ilmu Pendidikan (JKIP), 1(3), 228–232. https://doi.org/10.61116/jkip.v1i3.179

Putra, A. D., & Salsabila, H. (2021). Pengaruh media interaktif dalam perkembangan kegiatan pembelajaran pada instansi pendidikan. Inovasi Kurikulum, 18(2), 231–241. https://doi.org/10.17509/jik.v18i2.36282

Ramadhan, M. I. (2023). Pengembangan media pembelajaran interaktif design engineering menggunakan software Autodesk Inventor Professional 2023 pada mata pelajaran teknik gambar manufaktur SMKN 1 Kediri. Skripsi tidak diterbitkan. Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Malang.

Rohman, A. F., Widiyanti, W., & Suyetno, A. (2023). Pengembangan modul pembelajaran inventor berbasis contextual teaching and learning (CTL) Pada mata pelajaran teknik gambar manufaktur di SMK Negeri 1 Singosari. Jurnal Teknik Mesin dan Pembelajaran, 6(1), 19-28. https://doi.org/10.17977/um054v6i1p19-28

Sagita, M., & Nisa, K. (2019). Pemanfaatan e-learning bagi para pendidik di era digital 4.0. Jurnal Sosial Humaniora Sigli, 2(2), 1–7. https://doi.org/10.47647/jsh.v2i2.169

Saleem, S., Dhuey, E., White, L., & Perlman, M. (2024). Understanding 21st century skills needed in response to industry 4.0: Exploring scholarly insights using bibliometric analysis. Telematics and Informatics Reports, 13, 1-12. https://doi.org/10.1016/j.teler.2024.100124

Santika, I. G. N. (2021). Grand desain kebijakan strategis pemerintah dalam bidang pendidikan untuk menghadapi revolusi industri 4.0. Jurnal Education and Development, 9(2), 369–377. https://journal.ipts.ac.id/index.php/ED/article/view/2500

Shih, Y. T., & Sher, W. (2021). Exploring the role of cad and its application in design education. Computer-Aided Design and Applications, 18(6), 1410–1424. https://doi.org/10.14733/cadaps.2021.1410-1424

Sugiyono, D. (2013). Metode penelitian kuantitatif, kualitatif, dan tindakan. Alfabet Bandung.

Siregar, Torang. (2023). Stages of research and development model research and development (R&D). DIROSAT: Journal of Education, Social Sciences & Humanities, 1(4), 142–158. https://doi.org/10.58355/dirosat.v1i4.48

Yang, Y., & Xia, N. (2023). Enhancing students' metacognition via AI-driven educational support systems. International Journal of Emerging Technologies in Learning (IJET), 18(24), 133–148. https://doi.org/10.3991/ijet.v18i24.45647

Yuliani, W., & Banjarnahor, N. (2021). Metode penelitian pengembangan (RnD) dalam bimbingan dan konseling. Quanta, 5(3), 111–118. https://doi.org/10.22460/q.v5i3p111-118.3051

Yunus, Y., & Fransisca, M. (2020). Analisis kebutuhan media pembelajaran berbasis Android pada mata pelajaran kewirausahaan. Jurnal Inovasi Teknologi Pendidikan, 7(2), 118–127. https://doi.org/10.21831/jitp.v7i1.32424




DOI: https://doi.org/10.21831/jitp.v11i3.72805

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Deni Kusuma Adi Pangestu, Widiyanti, Poppy Puspitasari, Agus Suyetno

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Our journal indexed by:

       

View Journal Statistics