Design of air conditioner (AC) system simulator on cars to improve student competence

Nuzul Hidayat, Universitas Negeri Padang, Indonesia
Ambiyar Ambiyar, Universitas Negeri Padang, Indonesia
Wakhinuddin S, Universitas Negeri Padang, Indonesia
Muslim Muslim, Universitas Negeri Padang, Indonesia
Wawan Purwanto, Universitas Negeri Padang, Indonesia

Abstract


The purpose of this study is to design a simulator for a car air conditioning system as a learning medium, so that the learning objectives can be achieved properly and in accordance with the expected competencies. This design uses an electric motor drive to drive the AC system compressor so that it is easier to operate and does not produce air pollution and is made with a design that can be moved easily by having sturdy wheels. The electric motor is also equipped with an inverter that can adjust the rotation of the motor as in the conditions of a real car engine. This research model uses Research and Development which includes the stages: problem analysis, seeking information, designing a model, validating the design, evaluating the model, testing the model, revising the model, wider testing, finalizing the design. The results obtained are the creation of an AC simulator that has been validated by experts in terms of media and material in the very feasible category, then from the user side with 25 respondents giving a value in the very feasible category for use in learning. The increase in competency occurred by 23.90% with a comparison of the pretest value with the posttest value.


Keywords


Simulator; air conditioner; competency

Full Text:

PDF

References


A.Aditya. (2020). Rancang Bangun Simulator Sistem Air Conditioning Mobil Type Single Blower Program Vokasi.

Andrizal, A., & Arif, A. (2017). Pengembangan Media Pembelajaran Interaktif Pada Sistem E-Learning Universitas Negeri Padang. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 17(2), 1–10. https://doi.org/10.24036/invotek.v17i2.75

Andrizal, Saputra, H. D., Setiawan, D., & Setiawan, M. Y. (2020). Percangan dan Pembuatan Simulator Sistem Pengkondisian Udara Mobil Jenis Orifice Tube Dengan Fluida Pendingin R134a. Journal of Mechanical, Electrical and Industrial Engineering, 2(3), 21–30.

Arif, A., Hidayat, N., & Setiawan, M. Y. (2017). Pengaruh Pengaturan Waktu Injeksi Dan Durasi Injeksi Terhadap Brake Mean Effective Pressure Dan Thermal Efficiency Pada Mesin Diesel Dual Fuel. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 17(2), 67–74. https://doi.org/10.24036/invotek.v17i2.73

Gall, B. dan. (1983). Borg dan Gall , “ educational research and development ( R & D ) is a process used to develop and validate educational production ".

Hafizah, N. (2017). Rancang Bangun Simulator Trouble Shooting Sistem Kelistrikan Ac Mobil. Ekp, 13(3), 1576–1580.

Hidayat, N., Sugiarto, T., & Yuvenda, D. (2017). Optimization of Effectiveness in Radiator Straight Fin Type With Flat Tube Angle Variation. October, 13–15.

Jiantoro, A. (2014). Kajian Dan Modifikasi Struktur Mekanik Mesin Simulator Cnc Ac Servo System Mechanical Structure Analysis and Modification of a Cnc Portable Simulator Using Ac Servo System.

Kalay, A. G. (2015). Perawatan Dan Perbaikan Sistem Air Conditioner Pada Mobil Daihatsu Taruna.

Kitada, M., Asano, H., Kanbara, M., & Akaike, S. (2000). Development of automotive air-conditioning system basic performance simulator: CFD technique development. JSAE Review, 21(1), 91–96. https://doi.org/10.1016/S0389-4304(99)00077-6

Mardapi, D. (2017). Pengukuran, Penilaian dan Evaluasi Pendidikan. In Parama Publishing. (Vol. 2). Elsevier B.V. https://doi.org/10.1016/j.sbspro.2014.08.192

Nasrullah, H., & Illahi, S. R. (2020). Pengujian Arus pada Simulator Sistem Kelistrikan Air Conditioner (AC). AEEJ : Journal of Automotive Engineering and Vocational Education, 1(2), 93–100. https://doi.org/10.24036/aeej.v1i2.32

Siregar, W. D., & Simatupang, L. (2020). Pengaruh Model Pembelajaran PBL Terhadap Aktivitas Belajar Dan Hasil Belajar Siswa Pada Materi Asam Basa. Jurnal Inovasi Pembelajaran Kimia, 2(2), 91. https://doi.org/10.24114/jipk.v2i2.19571

Suranegara, G. M., Abdullah, A. G., & Saputra, W. S. (2014). Tantangan Pendidikan Teknologi Kejuruan dalam Era Global. Prosiding Konvensi Nasional Asosiasi Pendidikan Teknologi Dan Kejuruan (APTEKINDO) Ke 7 FPTK Universitas Pendidikan Indonesia, Bandung, 13 Sd.14 November 2014, November, 254–262.

Syahyuniar, R., Ningsih, Y., & Kurniawan, R. D. (2018). Perancangan Sistem Kerja Simulator Ac (Air Conditioner) Mobil. Jurnal Elemen, 5(1), 20. https://doi.org/10.34128/je.v5i1.71

UNP. (2017). Struktur Kurikulum Pendidikan Teknik Otomotif (S1) (pp. 1–10).

Wiharsa, R. A. (2018). Karakteristik Sistem Ac Mobil Pada Putaran Car Ac Characteristics Using 1400 Rpm Compressor Rotation Mechanical Engineering Department.




DOI: https://doi.org/10.21831/jitp.v10i1.55758

Refbacks



Copyright (c) 2023 Nuzul Hidayat, Ambiyar, Wakhinuddin, Muslim, Wawan Purwanto

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Our journal indexed by:

         

View Journal Statistics