Tool from Pack Carburized Low Carbon Steel
DOI:
https://doi.org/10.21831/jps.v19i2.3500Keywords:
Tool, pack carburizing, tool lifeAbstract
The research is aimed at developing alternative tool from pack carburized low carbon steel. The tools were made from low carbon steel of 111,67 VHN using cutting machine and then sharpened. Carburizing process was conducted at temperature vary of 800, 850 and 900 0C for 1, 2 and 3 hours and then quenched into water and oil. The tools were subsequently quenched after diffusion process. The tools was used to cut mild steel of í˜31,75 mm on EMCO Maximat V-13 lathe machine with cutting speed 25m/minutes, feeding 0,112mm/ rpm and depth of cut 1 mm. Tools that carburized at 850 0C for 3 hours dan quenched in water gives mean maximum hardness of 760,4 VHN and tool life up to 425 second. It shows that the tool is not economical developed for mass production.References
Boothroyd., G. 1975. Fundamentals of metal machining and machine tools, Pahat dari Baja Karbon (Soemowidagdo, A.L. dkk) 32 International student edition.
Tokyo, Japan: McGraw Hill Kogakusha, Ltd. Callister, W.D. 2001. Fundamentals of materials scince and engineering. 5th edition. USA: John Wiley & Sons, Inc.
Collins, J.A. 1981. Failure of material in mechanical design, analysis predection and prevention. US: John Willey & Son, Inc.
Fahrudin, E. 2005. Pack carburizing dengan media arang batok pada baja karbon rendah untuk dies dan punch proses stamping profil lingkaran: Studi kasus di Alfa Spare Part Bandung. Laporan Tugas Akhir. http://abstraksi-ta.fti.itb. ac.id/, diakses 15 April 2008.
Hananto, W dan Muhammad N.H. 2003. Analisa rasio pemampatan tebal geram terhadap perubahan bahan material ST 42-ST 70 dan feeding dengan pahat HSS pada mesin bubut. Prosiding Seminar Nasional Teknik Mesin, FT–Universitas Brawijaya, 210-215.
Nurhadiyanto, D. 2002. Analisis pengaruh kecepatan potong, kecepatan pemakanan dan kedalaman potong terhadap keausan tepi pahat pada mesin bubut. Saintek, Vol. 7 No. 2, 65-81.
Rajan, T.V., Sharma, C.P., & Sharma, A., 1997. Heat treatment–principles and techniques. New Delhi: Prentice Hall of India.
Rumendi, U. dan Purnawarman., O. 2006. Pahat bubut baja ST 37 sebagai pahat alternatif pengganti pahat bubut HSS melalui proses karburasi arang batok, Prosiding Seminar on Application and Research in Industrial Technology, SMART 2006, UGM Yogyakarta, III.57–III.62.
Setiamarga, B.H., Rumendi, U. & Kurniawati, N. 2006, Pack carburizing pada sprocket sepeda motor dengan material baja karbon rendah. Jurnal Teknik Mesin, Vol. 21, No. 1, 28-33.
Soemowidagdo, A.L., Mujiyono, Sutapa, J.P.G., Rumendi, U. 2010. Pengembangan metode karburising padat untuk meningkatkan kekuaran mekanis baja karbon rendah. Laporan Penelitian. LPPM UNY.
Downloads
Published
How to Cite
Issue
Section
License
Who Can Submit?
Any individual may submit an original manuscript for consideration for publication in Jurnal Penelitian Saintek as long as they hold the copyright to the work or are authorized by the copyright owner(s) to submit it. Authors retain initial ownership of the copyrights to their works prior to publication, except in cases where, as a condition of employment, they have agreed to transfer copyright to their employer.
User Rights
Jurnal Penelitian Saintek is an Open Access journal. Users are granted the right to read, download, copy, distribute, print, search, or link to the full texts of articles, provided they comply with the conditions of the Creative Commons Attribution-ShareAlike License 4.0 (CC BY-SA 4.0).
https://creativecommons.org/licenses/by-sa/4.0/
Author Rights
Authors retains copyrights.
Jurnal Penelitian Saintek by http://journal.uny.ac.id/index.php/saintek is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.