Temperature control system for infant incubator using DS18B20 sensor

Laila Katriani,
Arif Setiawan,
Denny Darmawan,

 10.21831/jsd.v3i2.4098

Abstract


A temperature control system for infant incubator using DS18B20 had been built. The dimension of the incubator was 45 x 35 x 35 cm3 and it used 200 W incandescent lamp as an heater element. The system was automated using ATMEGA328P and Triac as an actuator. It succeeded in keeping the incubator temperature at (36.5 ± 0.1) °C. It took around 10 minutes to reach the working temperature of 36.5 °C from room temperature of 26 °C.

 

Key words: temperature control system, infant incubator, DS18B20


Full Text:

PDF


DOI: https://doi.org/10.21831/jsd.v3i2.4098

Refbacks

  • There are currently no refbacks.


Copyright (c)

Printed ISSN (p-ISSN): 2085-9872
Online ISSN (e-ISSN): 2443-1273
Indexer:
     
Creative Commons License
 
Jurnal Sains Dasar  is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
 
Free counters!
 
View My Stats