Model of teaching factory in vocational high school fashion program students

dina ampera, Universitas Negeri Medan, Indonesia
Nurhayati Tanjung, Universitas Negeri Medan, Indonesia
farihah farihah, Universitas Negeri Medan, Indonesia
Veronika Yulisna Sinukaban, Universitas Negeri Medan, Indonesia
Netty Juliana, Universitas Negeri Medan, Indonesia

 10.21831/jptk.v29i2.65043

Abstract


The Fashion Design expertise program applies a teaching factory learning system to productive subjects, including Industrial Clothing. Judging from the planning and implementation, the teaching factory learning model in this subject has not run optimally. This study aims to: to determine the effectiveness of the teaching factory model for students of fashion as a learning model at State Vocational High School 1 Beringin. This type of research is descriptive qualitative with research and development methods. This research was conducted at State Vocational High School 1 Beringin, with the research subjects being teachers and students of the Fashion Design Expertise Program. The object of this research is teaching factory activities in productive subjects. Research on the development of the Teaching Factory learning model went through three stages, namely: 1) Needs analysis, 2) Product development, and 3) Expert Validation. The results of this study indicate that the Teaching Factory model has been effectively used in productive subjects such as industrial clothing with an assessment of 98.6% by material experts and 88% by design experts. After going through the validation stage by material experts and design experts, it can be concluded that the Teaching Factory learning model product developed has been effectively used as a learning model in productive subjects for students of the Dressmaking Expertise Program at Beringin 1 State Vocational High School

Keywords


Learning model, Vocational High School (SMK), Teaching Factory

Full Text:

PDF

References


Aaltonen, K., Isacsson, A., Laukia, J., & Vanhanen-nuutinen, L. 2013. Practical skills, education and development – Vocational education and training in Finland Sales of the publication. Finland: HAAGA-HELIA University of Applied Sciences.

Amri, S. (2013). Pengembangan & Model Pembelajaran Dalam Kurikulum 2013. Jakarta: PT. Prestasi Pustakaraya

Badan Pusat Statistik. (2021). Data Pengganguran (https://www.bps.go.id/pressrelease/2019/05/06/1564/februari-2021--tingkat-pengangguran--terbuka--tpt--sebesar-5-01-persen.html)

Bakar, R. 2014. The Effect of Learning Motivation on Student ’s Productive Competencies in Vocational High School, West Sumatra. International Journal of Asian Social Science, 4(6), 722–732.

Barrett, P., Treves, A., Shmis, T., Ambasz, D., & Ustinova, M. 2019. The Impact of School Infrastructure on Learning. Washington DC: The World Bank.

Direktorat PSMK. (2017). Tatakelola Pelaksanaan Teaching Factory. Jakarta: Departemen Pendidikan Nasional

Endarta. 2017. Kompetensi Inti, Kompetensi Dasar, Silabus dan RPP SMK Terbaru Revisi 2017 – Literasi Pedagogi & Teknologi. Retrieved December 6, 2019, from duniapendidikan.putrautama.id/ website: http://duniapendidikan.putrautama.id/kompetensi-inti-kompetensi-dasarsilabus-dan-rpp-smk-terbaru-revisi-2017/

F. Amar, A., Hidayat, D., & Suherman, A. 2015. Penerapan Model Pembelajaran Teaching Factory 6 Langkah (Model TF-6M) Untuk Meningkatkan Motivasi Berprestasi Siswa dI SMK. Retrieved December 5, 2019, from Journal of Mechanical Engineering Education website: https://docplayer.info/38002134-Penerapan-model-pembelajaran-teaching-factory-6-langkah-model-tf-6m-untukmeningkatkan-motivasi-berprestasi-siswa-di-smk.html

Fajaryati, N. (2012). Evaluasi Pelaksanaan Teaching Factory SMK Di Surakarta

Program Studi Pendidikan Teknik Elekotronika Universitas Negeri. Jurnal Pendidikan Vo`AQkasi, Vol 2, Nomor 3. https://doi.org/10.21831/jpv.v2i3.1040

Fajaryati, N. (n.d.). Evaluation Of SMK Teaching Factory. Journal. Uny.Ac.Id, 325– 337. Fisher, K., & Coutts, J. 2001. Schooling Issues Digest Building Better Outcomes: The Impact of School Infrastructure on Student Outcomes and Behaviour. Canberra: U.S. Departement of Education.

Fitrihana, N. (2018). Rancangan Pembelajaran Teaching Factory Di SMK Tata Busana, Universitas Negeri Yogyakarta. Home Ecomics Journal, Vol 2,No. 2, hlm. 56-64 ISSN: 2579-4272. https://doi.org/10.21831/hej.v2i2.23293

Hasibuan, M. (2018). Manajemen Sumber Daya Manusia. Jakarta: PT. Bumi Aksara.

Hidayat, M. (2015). Model Pembelajaran Teaching Factory Untuk Meningkatkan Kompetensi Siswa Dalam Mata Pelajaran Produktif Universitas Pendidikan Indonesia. Jurnal Ilmu Pendidikan, Jilid 17, Nomor 4, hlm. 270-278. http://journal.um.ac.id/index.php/jip/article/view/2729

Khasanah, Uswatun. (2017). Kesiapan Pelaksanaan Pemblajaran Berbasis Teaching Factory Pada Program Studi Keahlian Teknik Audio Video Di SMK Negeri 1 Magelang Tahun Ajaran 2016/2017. Skripsi Program Studi Pendidikan Teknik Elektronika, Fakultas Teknik, Universitas Negeri Yogyakarta.

Kurniawan, R. (2014). Pengaruh Penerapan Model Pembelajaran Teaching Factory 6 Langkah (TF-6M) Dan Prestasi Belajar Kewirausahaan Terhadap Minat Wirausaha, Universitas Pendidikan Indonesia. Invotec, Vol X, No 1, hlm. 56-66. https://doi.org/10.17509/invotec.v10i1.5092.

Kuswantoro, A. (2014). Teaching Factory Rencana dan Nilai Entrepreneurship. Yogyakarta: Graha Ilmu.

Lestari, dkk. (2017). Efektivitas Pelaksanaan Teaching Factory Siswa Sekolah Menengah Kejuruan (SMK) Di Solo Technopark. Univesitas Sebelas Maret. http://jurnal.fkip.uns.ac.id/index.php/ptm/article/download/8148/5912

Martawijaya, D. H. 2012. Developing a teaching factory learning model to improve production competencies among mechanical engineering students in a vocational senior high school. Journal of Technical Education and Training (JTET), 4(2), 45–56.

Mustari, dkk. (2017). Model Teaching Factory bagi PembelajaranMerencana dan Menginstalasi Sistem Audio Universitas Negeri Semarang. Journal of Vocational and Career Educational, Vol 2, No 2, hlm 96-105 ISSN: 2503-2305.

https://journal.unnes.ac.id/sju/index.php/jvce

Nurtanto, dkk. (2017). Pengembangan Model Teaching Factory Di sekolah

Kejuruan. Prosiding Seminar Nasional Pendidikan FKIP UNTIRTA, hlm

-454 ISBN: 978-602-19411-2-6.

Perdana, N. (2018). Evaluasi Pelaksanaan Pembelajaran Model Teaching Factory Dalam Upaya Peningkatan Mutu Lulusan. Jurnal Serunai Administrasi Pendidikan, Vol. 7, No. 1, e-ISSN 2620-9209. (https://ejournal.stkipbudidaya.ac.id/index. php/jc/article/view/ 116)

Rusman. (2014). Model-model Pembelajara: Mengembangkan Profesional Guru.

Jakarta: PT. Raja Grafindo Persada

Sagala, S. (2017). Konsep Dan Makna Pembelajaran: Untuk Membantu Memecahkan Problematika Belajar Dan Mengajar. Bandung: Alpabeta

Sugiyono. (2019). Metode Penelitian Pendidikan Pendekatan Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta.

Torun, H. 2017. Do Vocational High School Graduates Have Better Employment Outcomes than General High School Graduates? Bonn, Germany.

Wahid, N., Bahrum, S., & Ibrahim, N. 2017. Pedagogical Content Knowledge of Art Teachers in Teaching the Visual Art Appreciation in School. International Journal of Academic Research in Business and Social Sciences, 7(12), 296–303. https://doi.org/10.6007/IJARBSS/v7-i12/3612.

Yazdi, S. V. 2013. Effective Employment: A Basic Objective for Curriculum Design in Higher Education. International Journal of Academic Research in Progressive Education and Development, 2(4), 28–43. https://doi.org/10.6007/IJARPED/v2-i4/282

Yunanto, D. (2016). Implementasi Teaching Factory di SMKN 2 Gendangsari Gunungkidul. Jurnal Vidya Karya, Vol 31, No 1. http://dx.doi.org/10.20527/jvk.v31i1.3971




DOI: https://doi.org/10.21831/jptk.v29i2.65043

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 dina ampera, Nurhayati Tanjung, farihah farihah, Veronika Yulisna Sinukaban, Netty Juliana

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

 

Online (e-ISSN): 2477-2410 || Printed (p-ISSN): 0854-4735

Jurnal Pendidikan Teknologi Kejuruan by http://journal.uny.ac.id/index.php/jptk was distributed under a Creative Commons Attribution 4.0 International License.

View My Stats

Supported by:

Jurnal Ilmiah Magister Managemen

Social Media: