Upgrading Manual Turning Machine Towards IoT-Based Manufacturing

Sutopo Sutopo, Department of Mechanical Engineering Education, Universitas Negeri Yogyakarta, Indonesia
Bayu Rahmat Setiadi, Department of Mechanical Engineering Education, Universitas Negeri Yogyakarta, Yogyakarta, Indonesia
Muhammad Hanzla, Institute of Aviation Studies (IAS) University of Management and Technology (UMT), Lahore, Punjab, Pakistan

 10.21831/jptk.v26i2.27334

Abstract


Technological independence is one aspect of the challenges of the industrial revolution era 4.0. Digitalization, robotization, big data, internet of things (IoT), and efficiency of work processes require an update in technology. If everything is held in the fulfillment of practicum facilities, it will undoubtedly cost a prohibitive fee. Many of the tools and machines found in learning machining practices in Vocational High Schools (VHS) in Indonesia are still a conventional machine. This study provides a breakthrough solution in the effectiveness and efficiency of traditional machining of the lathe that starts with a preliminary identification of literature, selection according to inclusion and exclusion criteria, coding, themes classifications, and supplementary areas. Through the literature review methodology, this article has the main objective of identifying the needs in architecture and the need for supporting devices on conventional lathes based on the IoT as well as safe, comfortable, and modern work areas in lathe machining practices.

Keywords


conventional machine upgrading, IoT-based turning machine, technology independence

Full Text:

PDF

References


V. Roblek, M. Meško, and A. Krapež, “A Complex View of Industry 4.0,” SAGE Open, vol. 6, no. 2, 2016.

A. Rojko, “Industry 4.0 Concept: Background and Overview,” Int. J. Interact. Mob. Technol., vol. 11, no. 5, pp. 77–90, 2017.

Y. Liao, E. R. Loures, F. Deschamps, G. Brezinski, and A. Venâncio, “The impact of the fourth industrial revolution: a cross-country/region comparison,” Production, vol. 28, no. 0, pp. 1–18, 2018.

K. Schwab, The Fourth Industrial Revolution. Geneva: World Economic Forum, 2016.

A. Haupt and A. Lerch, “Forward osmosis application in manufacturing industries: A short review,” Membranes (Basel)., vol. 8, no. 3, 2018.

B. R. Setiadi, S. Setuju, D. Ratnawati, S. Suparmin, S. Sugiyono, and A. Widatmoko, “E-monitoring in the vocational process-based assessment,” Int. J. Eng. Technol., vol. 7, 2018.

C. A. Lauff, D. Kotys-Schwartz, and M. E. Rentschler, “What is a prototype? what are the roles of prototypes in companies?,” J. Mech. Des. Trans. ASME, vol. 140, no. 6, 2018.

P. Sudira, “Indonesia vocational education praxis betwen,” in Empowering Vocational Education and Training to Elevate National Economic Growth, 2014, pp. 190–200.

T. Suartini, “Influence Application of Learning Model on Vocational Education Based on Quality Issurance,” SAGE Open, vol. 9, no. 2, 2019.

J. Holstead and M. H. King, “High-Quality 21st Century Community Learning Centers: Academic Achievement Among Frequent Participants and Non-Participants,” J. Educ. Students Placed Risk, vol. 16, no. 4, pp. 255–274, 2011.

H. Abdul Zubar, K. Visagavel, V. Deepak Raja, and A. Mohan, “Occupational health and safety management in manufacturing industries,” J. Sci. Ind. Res. (India)., vol. 73, no. 6, pp. 381–386, 2014.

V. O. Iwaifo, “Better be safe than be sorry: An analysis of workshopnbehaviour in vocational and technical schools,” Int. NGO J., vol. 4, no. 9, pp. 386–390, 2009.

A. S. Reddy, B. Jaya, and N. Satish, “Review on Real Time Control of Lathe Machine During Turning Operations,” Int. J. Tech. Innov. Mod. Eng. Sci., vol. 5, no. 4, pp. 826–832, 2019.

P. N. Parmar, V. R. Gondalia, N. C. Mehta, M. E. Scholar, and A. Professor, “Review on Advance Automation of Conventional Lathe Machine,” Int. J. Eng. Dev. Res., vol. 2, no. 2, pp. 2321–9939, 2014.

R. Y. Zhong, L. Wang, and X. Xu, “An IoT-enabled Real-time Machine Status Monitoring Approach for Cloud Manufacturing,” Procedia CIRP, vol. 63, pp. 709–714, 2017.

M. Saqlain, M. Piao, Y. Shim, and J. Y. Lee, “Framework of an IoT-based Industrial Data Management for Smart Manufacturing,” J. Sens. Actuator Networks, vol. 8, no. 2, 2019.

ILO, Ergonomic checkpoints: Practical and easy-to-implement solutions for improving safety, health and working conditions, Second Edi., vol. 91. Geneva: ILO publications, 2010.

J. Gendall, “21st-Century Newsroom Design,” Pro AV, vol. 25, no. 3, p. 15, 2008.

K. I. Ismara, B. R. Setiadi, A. W. Khurniawan, and D. Supriadi, “Rearranging laboratory design towards good vocational school governance,” J. Adv. Res. Dyn. Control Syst., vol. 11, no. 12 Special Issue, pp. 301–305, 2019.

P. Zheng et al., “Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives,” Front. Mech. Eng., vol. 13, no. 2, pp. 137–150, 2018.

A. K. Nandi, “Design & Implementation of an IoT Based 3-Axis CNC VMC,” Int. J. Sci. Eng. Res., vol. 9, no. 6, pp. 145–152, 2018.

B. R. Setiadi, S. Setuju, T. Sukardi, and S. Sugiyono, “Efficiency of material consumption in sustainable conventional machining practices,” IOP Conf. Ser. Mater. Sci. Eng., vol. 434, p. 012175, 2018.




DOI: https://doi.org/10.21831/jptk.v26i2.27334

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Jurnal Pendidikan Teknologi dan Kejuruan

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

 

Online (e-ISSN): 2477-2410 || Printed (p-ISSN): 0854-4735

Jurnal Pendidikan Teknologi Kejuruan by http://journal.uny.ac.id/index.php/jptk was distributed under a Creative Commons Attribution 4.0 International License.

View My Stats

Supported by:

Jurnal Ilmiah Magister Managemen

Social Media: