Email this article 
Local Wisdom-Based 4-On (Vision, Action, Passion, and Collaboration) Model in Competencies of Machining Technique in Vocational Secondary Schools
Moh Fawaid, Faculty of Teacher Training and Education, Universitas Sultan Ageng Tirtayasa, Jl. Ciwaru Raya, Cipare, Serang, Banten 42117, Indonesia
Muhammad Nurtanto, Faculty of Teacher Training and Education, Universitas Sultan Ageng Tirtayasa, Jl. Ciwaru Raya, Cipare, Serang, Banten 42117, Indonesia
Soffan Nurhaji, Faculty of Teacher Training and Education, Universitas Sultan Ageng Tirtayasa, Jl. Ciwaru Raya, Cipare, Serang, Banten 42117, Indonesia
Solis Setiyani, Faculty of Health Science, Universitas Faletehan, Jl. Raya Cilegon No.KM. 06, Pelamunan, Kramatwatu, Serang, Banten 42616, Indonesia
Abstract
This study aims to identify teacher competency needs and develop a local wisdom-based 4-ON (vision, action, passion, and collaboration) model in the competencies of machining technique in vocational secondary schools. The 4-ON model is a way to examine the professionalism of teachers in vocational secondary schools. The type of study is research and development, using the Richey and Klein model. The subjects are 26 vocational teachers of machining techniques. The data collection uses questionnaires and documentation. The questionnaire instrument is declared valid by 3 experts in content and tested with reliable results with a value of 0.82. The data analysis is quantitative descriptive. The study of the research and development are: (1) the teacher need for 4-ON (vision, action, passion, and collaboration) 79.81% response, the implementation of the local wisdom in learning 78.13% response, and six competencies machining technique expertise 80.48% response; (2) the local wisdom-based 4-ON model in the competencies of machining technique goes through 3 stages, namely development, process, and output for a result the professional and competent teacher.
Keywords
Full Text:
PDFReferences
J. Warwas and C. Helm, “Professional learning communities among vocational school teachers: Profiles and relations with instructional quality,” Teach. Teach. Educ., vol. 73, pp. 43–55, 2018, doi: 10.1016/j.tate.2018.03.012.
M. Orozco, D. Gijbels, and C. Timmerman, “conceptualisation of integrative learning. a focus on theory-practice integration in technical vocational education and training,” Vocat. Learn., vol. 12, no. 3, pp. 405–424, 2019, doi: 10.1007/s12186-019-09223-2.
L. Valach, “Enacted mind, enminded and encultured action in vocational counseling: contextual action theory,” Int. J. Educ. Vocat. Guid., no. 0123456789, 2020, doi: 10.1007/s10775-020-09432-5.
Direktorat Jenderal Pendidikan Dasar dan Menengah, Spektum Keahlian Sekolah Menengah Kejuruan/Madrasah Aliyah Kejuruan. Jakarta, Indonesia, 2018, p. 10.
D. Wardiman, Pengembangan Sumber Daya Manusia Melalui Sekolah Menengah Kejuruan. Jakarta: PT Jayakarta Agung Offset, 1999.
A. Volodina and G. Nagy, “Vocational choices in adolescence: The role of gender, school achievement, self-concepts, and vocational interests,” J. Vocat. Behav., vol. 95–96, pp. 58–73, 2016, doi: 10.1016/j.jvb.2016.07.005.
Wagiran, “Pengembangan karakter berbasis kearifan local hamemayu hayuning bawana (identifikasi nilai-nilai karakter berbasis budaya),” J. Pendidik. Karakter, vol. 2, no. 3, pp. 329–339, 2012.
M. C. M. M. L. Bontemps-Hommen, A. J. Baart, and F. J. H. Vosman, “Professional workplace-learning. can practical wisdom be learned,” Vocat. Learn., vol. 13, no. 3, pp. 479–501, 2020,doi: 10.1007/s12186-020-09249-x.
C. Pornpimon, A. Wallapha, and C. Prayuth, “Strategy challenges the local wisdom applications sustainability in schools,” Procedia - Soc. Behav. Sci., vol. 112, no. Iceepsy 2013, pp. 626–634, 2014, doi: 10.1016/j.sbspro.2014.01.1210.
J. Kidman, C. Yen, and E. Abrams, “Indigenous studens’ experiences of the hidden curriculum in science education: a cross-national study in New Zealand and Taiwan,” Int. J. Sci. Math. Educ., vol. 11, no. 1, pp. 43–64, 2013, doi: 10.1007/s10763-012-9365-9.
Parmin, Sajidan, Ashadi, Sutikno, and Y. A. Maretta, “Preparing prospective teachers in integrating science and local wisdom through practicing open inquiry,” J. Turkish Sci. Educ., vol. 13, no. 2, pp. 3–14, 2016, doi: 10.12973/tused.10163a.
I. Indriaturrahmi and S. Sudiyatno, “The role of business and industry in the implementation of Vocational High School (VHS) based on local wisdom in the city of Mataram,” J. Pendidik. Vokasi, vol. 6, no. 2, pp. 162–172, 2016.
J. LI, “vocational core competencies of college students under the guidance of socialist core values,” Stud. Sociol. Sci., vol. 7, no. 6, pp. 32–36, 2016, doi: 10.3968/9164.
S. Billett, Vocational Education: Purposes, Traditions and Prospects, 1st ed. New York: Springer Netherlands, 2011.
J. Baggini, “What professionalism means for teachers today?,” Educ. Rev., vol. 18, no. 2, pp. 5–11, 2005.
P. H. Phelps, “The three rs of professionalism,” Kappa Delta Pi Rec., vol. 42, no. 2, pp. 69–71, 2006, doi:10.1080/00228958.2006.10516436.
N. Demirkas, “Defining ‘ teacher professionalism ’ from different perspectives,” in Procedia Social and Behavioral Sciences, 2010, vol. 9, pp. 2047–2051, doi: 10.1016/j.sbspro.2010.12.444.
C. Girvan, C. Conneely, and B. Tangney, “Extending experiential learning in teacher professional development,” Teach. Teach. Educ., vol. 58, pp. 129–139, 2016, doi: 10.1016/j.tate.2016.04.009.
J. Gore, A. Lloyd, M. Smith, J. Bowe, H. Ellis, and D. Lubans, “Effects of professional development on the quality of teaching: Results from a randomised controlled trial of Quality Teaching Rounds,” Teach. Teach. Educ., vol. 68, pp. 99–113, 2017, doi:10.1016/j.tate.2017.08.007.
J. P. Carpenter et al., “What should teacher educators know about technology? Perspectives and self-assessments,” Teach. Teach. Educ., vol. 95, p. 103124, 2020, doi: 10.1016/j.tate.2020.103124.
R. Bakar, “The influence of professional teachers on Padang vocational school students’ achievement,” Kasetsart J. Soc. Sci., vol. 39, no. 1, pp. 67–72, Jan. 2018, doi: 10.1016/J.KJSS.2017.12.017.
S. Surono and W. Wagiran, “The profile of vocational high school teachers of the machining engineering and its relevance to the curriculum of mechanical engineering education study program, Faculty of Engineering , Yogyakarta State University,” J. Pendidik. Vokasi, vol. 6, no. 1, pp. 94–110, 2016.
R. C. Richey and J. D. Klein, Design and development research. London: Lawrence Erlbaum Associates. Inc., 2010.
J. R. Fraenkel, N. E. Wallen, and H. H. Hyun, How to Design and Evaluate Research in Education, 8th ed. New York: McGraw-Hill Companies, Inc, 2012.
Suharno, N. A. Pambudi, and B. Harjanto, “Vocational education in Indonesia: History, development, opportunities, and challenges,” Child. Youth Serv. Rev., vol. 115, no. May, p. 105092, 2020, doi: 10.1016/j.childyouth.2020.105092.
L. T. Tran and T. T. T. Le, Teacher Professional Learning in International Education: Practice and Perspectives from the Vocational Education and Training Sector. Switzerland: Palgrave Macmillan, 2018.
M. G. Sherin and E. A. Van Es, “Effects of video club participation on teachers’ professional vision,” J. Teach. Educ., vol. 60, no. 1, pp. 20–37, 2009, doi: 10.1177/0022487108328155.
A. Saraswati, I. Hermadi, and S. H. Wijaya, “Development of knowledge management system of teachers’ competency,” J. Pendidik. Teknol. dan Kejuru., vol. 25, no. 1, pp. 124–131, 2019, doi: 10.21831/jptk.v25i1.23575.
A. Moè, “Harmonious passion and its relationship with teacher well-being,” Teach. Teach. Educ., vol. 59, pp. 431–437, 2016, doi: 10.1016/j.tate.2016.07.017.
H. Abizar, Buku Master Lesson Study, 1st ed. Yogyakarta: Diva Press, 2017.
N. Absari, “The effectiveness of Technology, Pedagogy and Content Knowledge (TPACK) in learning,” vol. 26, no. 1, pp. 43–51, 2020.
P. Anggraini and T. Kusniarti, “Character and local wisdom-based instructional model of bahasa Indonesia in vocational high schools,” J. Educ. Pract., vol. 8, no. 5, pp. 23–29, 2017.
D. Guile and L. Unwin, The Wiley Hanbook of Vocational Education and Training. USA: John Wiley & Sons, Inc, 2019.
S. Billett, “The standing of vocational education : sources of its societal esteem and implications for its enactment,” J. Vocat. Educ. Train., vol. 66, no. 1, pp. 1–21, 2013, doi: 10.1080/13636820.2013.867525.
S. Mikkonen, L. Pylväs, H. Rintala, P. Nokelainen, and L. Postareff, “Guiding workplace learning in vocational education and training : a literature review,” Empir. Res. Vocat. Educ. Train., vol. 9, no. 9, pp. 1–22, 2017, doi: 10.1186/s40461-017-0053-4.
B. S. Wijanarka, D. Rahdiyanta, and T. Habanabakize, “The task of machine tool operation in small and medium enterprises in Indonesia,” J. Pendidik. Teknol. dan Kejuru., vol. 24, no. 1, pp. 39–45, 2018, doi: 10.21831/jptk.v24i1.18004.
DOI: https://doi.org/10.21831/jptk.v27i1.33197
Refbacks
- There are currently no refbacks.
Copyright (c) 2021 Jurnal Pendidikan Teknologi dan Kejuruan
This work is licensed under a Creative Commons Attribution 4.0 International License.
Online (e-ISSN): 2477-2410 || Printed (p-ISSN): 0854-4735
Jurnal Pendidikan Teknologi Kejuruan by http://journal.uny.ac.id/index.php/jptk was distributed under a Creative Commons Attribution 4.0 International License.
View My StatsSupported by:
Social Media:
