Design of trainer kit as a fault-finding based on electricity and electronics learning media

Muhammad Anwar, Universitas Negeri Padang, Indonesia
Mochamad Bruri Triyono, (Scopus ID: 57201260800) Universitas Negeri Yogyakarta, Indonesia
Ta'ali Ta'ali, Universitas Negeri Padang, Indonesia
Hendra Hidayat, Universitas Negeri Padang, Indonesia
Veva Nellone Syahputeri, Universitas Negeri Padang, Indonesia

Abstract


According to the field of expertise, efforts to strengthen the competence of graduates continue to be pursued, especially through optimizing the learning process. Among these efforts is to use learning media that strengthen the competence of the field of study and about thinking skills. This study aims to produce a trainer kit as a medium for learning basic electricity and electronics based on fault-finding in Basic Electrical and Electronics subjects. The method used is the Richey and Klein Design and Development (D&D) method which consists of three stages, including planning (design), production, and evaluation. Experts carried out the assessment of the feasibility of the trainer kit with an instrument in the form of a questionnaire. The results of this study indicate that the trainer kit has a good performance.According to the field of expertise, efforts to strengthen the competence of graduates continue to be pursued, especially through optimizing the learning process. Among these efforts is to use learning media that strengthen the competence of the field of study and about thinking skills. This study aims to produce a trainer kit as a medium for learning basic electricity and electronics based on fault-finding in Basic Electrical and Electronics subjects. The method used is the Richey and Klein Design and Development (D&D) method which consists of three stages, including planning (design), production, and evaluation. Experts carried out the assessment of the feasibility of the trainer kit with an instrument in the form of a questionnaire. The results of this study indicate that the trainer kit has a good performance.

Keywords


Fault finding; learning media; trainer kit

Full Text:

PDF

References


Jurnal Penelitian Ilmu Pendidikan, 12(1), 14–23. https://doi.org/10.21831/jpipfip.v12i1.20116

Anshary, I., & Edidas, E. (2018). Pengembangan trainer mikrokontroler sebagai media pembelajaran dengan metode fault-finding. Voteteknika (Vocational Teknik Elektronika Dan Informatika), 6(2), 80–84. https://doi.org/10.24036/voteteknika.v6i2.102123

Anwar, M. (2016). Buku panduan model pembelajaran berpikir orde tinggi pada bidang keahlian elektronika. Universitas Negeri Yogyakarta.

Arsyad, A. (2010). Media pembelajaran. RajaGrafindo Persada.

Badan Pusat Statistik Republik Indonesia. (2011). Tingkat pengangguran terbuka lulusan SMK paling tinggi. Databoks.Katadata.Co.Id. https://databoks.katadata.co.id/datapublish/2021/11/06/tingkat-pengangguran-terbuka-lulusan-smk-paling-tinggi

Boylestad, R. L., & Nashelsky, L. (1996). Electronic devices and circuit theory. Prentice Hall. http://www.rtna.ac.th/departments/elect/Data/EE306/Electronic Devices and Circuit Theory.pdf

Budiastuti, D., & Bandur, A. (2018). Validitas dan reliabilitas penelitian: Dilengkapi analisis denan NVIVO, SPSS, dan AMOS. Penerbit Mitra Wacana Media. https://core.ac.uk/download/pdf/187725992.pdf

Cathey, J. J. (2002). Theory and problems of electronic devices and circuits (2nd ed.). McGraw-Hill. https://doi.org/0-07-139830-9

Daryanto, D. (2016). Media pembelajaran: Peranannya sangat penting dalam mencapai tujuan pembelajaran (2nd ed.). Gava Media.

Electronics Tutorials. (n.d.-a). 555 circuits part 1. Electronics-Tutorials.Ws. Retrieved July 26, 2021, from https://www.electronics-tutorials.ws/waveforms/555-circuits-part-1.html

Electronics Tutorials. (n.d.-b). Full wave rectifier. Electronics-Tutorials.Ws. Retrieved July 26, 2021, from https://www.electronics-tutorials.ws/diode/diode_6.html

Electronics Tutorials. (n.d.-c). Wheatstone bridge. Electronics-Tutorials.Ws. Retrieved July 26, 2021, from https://www.electronics-tutorials.ws/blog/wheatstone-bridge.html

Griffin, P., McGaw, B., & Care, E. (2012). Assessment and teaching of 21st century skills. Springer. https://doi.org/10.1007/978-94-007-2324-5

Hamid, M. A., Aribowo, D., & Desmira, D. (2017). Development of learning modules of basic electronics-based problem solving in Vocational Secondary School. Jurnal Pendidikan Vokasi, 7(2), 149–157. https://doi.org/10.21831/jpv.v7i2.12986

Hapnita, W. (2018). Faktor internal dan eksternal yang dominan mempengaruhi hasil belajar menggambar dengan perangkat lunak siswa kelas XI teknik gambar bangunan SMK N 1 Padang tahun 2016/2017. CIVED (Journal of Civil Engineering and Vocational Education), 5(1), 2175–2182. https://doi.org/10.24036/cived.v5i1.9941

Hariyanto, H., Aribowo, D., & Fatkhurrokhman, M. (2020). Pengembangan media pembelajaran trainer kit pengendali motor 3 phase pada mata pelajaran instalasi motor listrik di SMKN 4 Kota Serang. JURNAL PENDIDIKAN FISIKA DAN KEILMUAN (JPFK), 5(1), 1–7. https://doi.org/10.25273/jupiter.v5i1.6223

Irianto, D. (2017). Industry 4.0: The challanges of tomorrow. Seminar Nasional Teknik Industri (SNTI) Dan Seminar Nasional Terpadu Keilmuan Teknik Industri (SATELIT) 2017, 4–6. http://k8bksti.ub.ac.id/wp-content/uploads/2017/10/Keynote-Speaker-Dradjad-Irianto.pdf

Keddie, R. (2008). DG3J 35: Electronic fault finding. Scottish Qualifications Authority. https://studylib.net/doc/18794476/dg3j-35-electronic-fault-finding

Kurniawan, A., Mukhadis, A., & Widiyanti, W. (2019). 21st century skills sebagai upaya pengembangan kapabilitas siswa SMK di Fourth Industrial Revolution Era. Jurnal Pendidikan : Teori, Penelitian, Dan Pengembangan, 4(7), 857–862. https://doi.org/10.17977/jptpp.v4i7.12614

Kurniawan, B., Wiharna, O., & Permana, T. (2017). Studi analisis faktor-faktor yang mempengaruhi hasil belajar pada mata pelajaran teknik listrik dasar otomotif. Indonesian Journal of Science and Technology, 4(2), 156–162. https://doi.org/10.17509/jmee.v4i2.9627

Kustandi, C., & Sutjipto, B. (2011). Media Pembelajaran: Manual dan digital (2nd ed.). Ghalia Indonesia.

Marpanaji, E., Wulandari, B., Mahali, M. I., & Fajaryati, N. (2017). Trainer PID controller sebagai media pembelajaran praktik sistem kendali. Elinvo (Electronics, Informatics, and Vocational Education), 2(1), 27–40. https://doi.org/10.21831/elinvo.v2i1.16369

Narulita, R., Jaya, I., & Taboer, M. A. (2021). Pengembangan media puzzle berseri untuk membantu meningkatkan kemampuan menggosok gigi pada anak autis kelas dasar. Jurnal Pendidikan Kebutuhan Khusus, 5(1), 24–35. https://doi.org/10.24036/jpkk.v5i1.565

Nizar, S. (2016). Pengembangan media pembelajaran trainer kit sensor dan aktuator untuk meningkatkan hasil belajar siswa kelas XI pada pelajaran teknik mikrokontroler di SMK YPT 1 Purbalingga [Universitas Negeri Yogyakarta]. http://eprints.uny.ac.id/46133/

Nuri, N., & Rusilowati, A. (2018). Pembelajaran berbasis produksi sebagai upaya peningkatan keterampilan produktifitas siswa SMK. Physics Communication, 2(1), 46–51. https://doi.org/10.15294/physcomm.v2i1.11338

Pain, R. (1996). Practical electronic fault-finding and troubleshooting. Newnes.

Rauner, F., & Maclean, R. (2008). Handbook of technical and vocational education and training research. Springer. https://doi.org/10.1007/978-1-4020-8347-1

Rivai, A., & Sudjana, N. (2011). Media pengajaran. Sinar Baru Algesindo.

Rizaldi, N. I. N., Putri, A. S., Calisa, T. R., & Hikmawan, R. (2021). Apakah model pembelajaran problem-based learning efektif diterapkan pada pendidikan kejuruan abad 21? Integrated : Journal Of Information Technology and Vocational Education, 3(1), 23–31. https://ejournal.upi.edu/index.php/integrated/article/view/32735

Rustandi, A., Asyril, A., & Hikma, N. (2020). Pengembangan media pembelajaran berbasis Android pada mata pelajaran simulasi dan komunikasi digital kelas X Sekolah Menengah Kejuruan Teknologi Informasi Airlangga tahun ajaran 2020/2021. Media Bina Ilmiah, 15(2), 4085–4092. https://doi.org/10.33758/mbi.v15i2.880

Sa’adah, L. (2021). Metode penelitian ekonomi dan bisnis (Z. Zulfikar (ed.)). Penerbit LPPM Universitas KH. A. Wahab Hasbullah.

Sani, R. A. (2016). Penilaian autentik. Bumi Aksara. http://digilib.unimed.ac.id/23839/1/Cover%2C Kata Pengantar%2C Daftar Isi.pdf

Setyo, M. (2016). Prinsip dan langkah-langkah penetapan KKM. Panduanmengajar.Blogspot.Com. https://panduanmengajar.blogspot.com/2016/01/prinsip-dan-langkah-langkah-penetapan.html

Setyosari, P. (2014). Menciptakan pembelajaran yang efektif dan berkualitas. JINOTEP (Jurnal Inovasi Dan Teknologi Pembelajaran) : Kajian Dan Riset Dalam Teknologi Pembelajaran, 1(1), 20–30. https://doi.org/10.17977/um031v1i12014p020

Sudira, P. (2013). Praksis pendidikan kejuruan Indonesia di antara mazab John Dewey dan Charles Prosser. Seminar Nasional Pendidikan Vokasi 2013, 197–206. http://eprints.uad.ac.id/2824/1/SNPV.pdf

Sugiyono, S. (2017). Metode penelitian dan pengembangan untuk bidang pendidikan, manajemen, sosial, teknik: Research and development/R&D. Alfabeta.

Sukir, S., Soenarto, S., & Soeharto, S. (2017). Developing conveyor trainer kit for programmable logic controllers in practical learning. Jurnal Pendidikan Vokasi, 7(3), 329–339. https://doi.org/10.21831/jpv.v7i3.15352

Sukmadinata, N. S. (2008). Metode penelitian pendidikan. Remaja Rosdakarya.

Syech, R., Abdi, R., & Tambunan, W. (2016). Penentuan konduktivitas listrik air Sungai Batang Lubuh dengan menggunakan metode jembatan Wheatstone. Jurnal APTEK, 8(2), 92–101. https://doi.org/10.30606/aptk.v8i2.855

Tafonao, T. (2018). Peranan media pembelajaran dalam meningkatkan minat belajar mahasiswa. Jurnal Komunikasi Pendidikan, 2(2), 103–114. https://doi.org/10.32585/jkp.v2i2.113

The United States Office of Personnel Management. (2013). All professional engineering positions, 0800. The United States Office of Personnel Management. https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Tooley, M., & Tooley, M. H. (2002). Electronic circuits: Fundamentals and applications. Taylor & Francis. https://books.google.co.id/books?id=CbFjeSBoKYUC

Wagner, T. (2008). The global achievement gap: Why even our best schools don’t teach the new survival skills our children deed and what we can do about it. Basic Books.

Wahono, S. J., & Sukir, S. (2020). Pengembangan trainer kit instalasi penerangan listrik dengan pelengkap sensor di SMK Negeri 1 Sedayu. Jurnal Edukasi Elektro, 4(2), 158–164. https://doi.org/10.21831/jee.v4i2.35829

Wening, S. (2017). Revitalisasi pendidikan vokasi melalui inovasi sistem penilaian berbasis kecakapan abad ke-21. Prosiding Pendidikan Teknik Boga Busana FT UNY, 12(1). https://journal.uny.ac.id/index.php/ptbb/article/view/33341

Yayuk, S., & Sugiyono, S. (2019). Pengaruh kepemimpinan kepala sekolah dan biaya pendidikan terhadap kualitas proses belajar mengajar dan dampaknya dengan kompetensi lulusan SMK di Kabupaten Gunungkidul. Jurnal Akuntabilitas Manajemen Pendidikan, 7(1), 84–96. https://doi.org/10.21831/amp.v7i1.23758




DOI: https://doi.org/10.21831/jpv.v11i2.43742

Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Our journal indexed by:
       

ISSN 2088-2866 (print) || ISSN 2476-9401 (online)

View Journal Visitor Stats