Developing mobile-based project-based learning module for project management courses in vocational education
M Giatman, Universitas Negeri Padang, Indonesia
Sukardi Sukardi, Universitas Negeri Padang, Indonesia
Dedy Irfan, Universitas Negeri Padang, Indonesia
Abstract
The purposes of this research were (1) to design and implement the development of mobile-based e-modules, (2) to know the students' and lecturers’ responses toward the development of the mobile-based e-modules, and (3) to know the students’ learning outcomes after using the mobile-based e-modules. The research employed a Research and Development with the 4D development model. The participants of this study were 54 students and three lecturers of construction engineering education. The data on the students' and lecturers’ responses to the development of mobile-based e-modules were obtained using the questionnaire method. The results of the study show that the design and implementation of the developed mobile-based e-modules were successful based on several tests conducted. The successfully developed e-modules can be seen from the students’ responses, in which 64% are included in the Very Practical category, and only 36% are in the Practical category. On the other hand, the results of the lecturers’ responses show a Very Practical category by the percentage of 100%. As a consequence, the students’ learning outcomes are declared complete at 100% and increase with a gain score of 0.44 (moderate) from 54 students in the project management course.
Keywords
Full Text:
FULLTEXT PDFReferences
Airasian, P. W., Cruikshank, K. A., Mayer, R. E., Pintrich, P. R., Raths, J., & Wittrock, M. C. (2001). A taxonomy for learning, teaching, and assessing: A revision of Bloom’s Taxonomy of educational objectives. (L. W. Anderson & D. R. Krathwohl, Eds.). New York, NY: Longman.
Bukit, M. (2014). Strategi dan inovasi pendidikan kejuruan: Dari kompetensi ke kompetisi. Bandung: Alfabeta.
Hermann, M., Pentek, T., & Otto, B. (2016). Design principles for industrie 4.0 scenarios. In Proceedings of the Annual Hawaii International Conference on System Sciences (Vol. 2016-March, pp. 3928–3937). IEEE Computer Society. https://doi.org/10.1109/HICSS.2016.488
Irianto, D. (2017). Industry 4.0: The challenges of tomorrow. In Kongres VIII Badan Penyelenggara Pendidikan Tinggi Teknik Industri Indonesia (BKSTI) - Seminar Nasional Teknik Industri (SNTI) dan Seminar Nasional Terpadu Keilmuan Teknik Industri (SATELIT) 2017. Malang: Department of Industrial Engineering, Faculty of Engineering, Universitas Brawijaya.
Ministry of Education and Culture. (2014). Materi pelatihan guru: Implementasi kurikulum 2013 tahun ajaran 2014/2015 - mata pelajaran IPA SMP/MTs. Jakarta: Ministry of Education and Culture of Republic of Indonesia.
Sani, R. A. (2014). Pembelajaran saintifik. Jakarta: Bumi Aksara.
Sugiyono, S. (2014). Metode penelitian pendidikan pendekatan kuantitatif, kualitatif, dan R&D. Bandung: Alfabeta.
Sumber Daya IPTEK & DIKTI. (2018). Formula 4C untuk bertahan pada era revolusi industri 4.0. Sumber Daya Iptek Dan Dikti Kemenristekdikti. Retrieved from http://sumberdaya.ristekdikti.go.id/index.php/2018/05/04/formula-4c-untuk-bertahan-pada-era-revolusi-industri-4-0/
Sung, T. K. (2018). Industry 4.0: A Korea perspective. Technological Forecasting and Social Change, 132(C), 40–45. https://doi.org/10.1016/j.techfore.2017.11.005
Syamsuar, S., & Reflianto, R. (2018). Pendidikan dan tantangan pembelajaran berbasis teknologi informasi di era revolusi industri 4.0. E-Tech : Jurnal Ilmiah Teknologi Pendidikan, 6(2). https://doi.org/10.24036/et.v2i2.101343
Thiagarajan, S., & Others. (1920). Instructional development for training teachers of exceptional children: A sourcebook. Washington, DC: National Center for Improvement of Educational Systems (DHEW/OE).
Trilling, B., & Fadel, C. (2009). 21st Century skills: Learning for life in our times. San Francisco, CA: John Wiley & Sons.
Universitas Negeri Padang. (2017). Sistem informasi kurikulum Universitas Negeri Padang. Retrieved from http://kurikulum.unp.ac.id/
Yahya, M. (2018). Era industri 4.0: Tantangan dan peluang perkembangan pendidikan kejuruan Indonesia. In Inaugural Professorial Speech on Vocational Education. Makassar: Faculty of Engineering, Universitas Negeri Makassar.
DOI: https://doi.org/10.21831/jpv.v9i2.25947
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Our journal indexed by: