THE MECHANICAL COMPONENTS WEAR LEVEL TEST USING THE THIN LAYER ACTIVATION TECHNIQUE

Silakhudin Silakhudin, Pusat Sains dan Teknologi Akselerator BATAN

 10.21831/jps.v20i2.9596

Abstract


This study discusses about the thin layer activation technique to test the mechanical components wear level. The results of preliminary experimental techniques are presented. The experimental results of the technique by using a motorcycle ring samples showed that the accuracy of measurement of the wear is 8 mg. This means that it will be less precise for testing the lightweight components. It will be more eligible to the component that the weight is more than 220 g. The prospect of developing the technique was also discussed; the result is that this technique would be appropriate to be developed at the DECY-13 cyclotron facility that will soon be constructed in BATAN.


Keywords


Cyclotron; mechanical components; thin layer activation; wear study

Full Text:

PDF

References


An, B., Suzuki, H., Ebisu, M., & Tanaka, H. 2012. Development of Two-Stage Turbocharger System With Electro Super Charger. Proceedings of The FISITA 2012, World Automotive Conggress, Volume 1: Advanced Internal Combustion Engine (I), FISITA London UK 2013, p. 147-155.

Anonim. 2015. Classic Balances, dari http:// www.it-teknik.se/Artiklar/Dokument/ DS_ME_Analytical_LR.pdf. Diunduh 29 September 2015.

Blondiaux, G., Dragulescu, E., & Racolta, P.M. 2002. Development of Calibration Methodes for TLA and UTLA. Report WP9 INDRANAP 33-02/2002.

Chowdhury, D.P., Datta, J., & Reddy, A.V.R. 2012. Application of Thin Layer Activation Technique for The Measurement of Surface Materials. An Pengujian Keausan Komponen (Silakhudin) Indian Perspective. Radiochemica Acta, 100(2), 139-145.

Ditrói, F., Takács, S., Tárkányi, F., Corniani, E., Smith, R., Jech, M., & Wopelka, T. 2012. Sub-micron Wear Measurement Using Activities under The Free Handling Limit. Journal of Radioanalytical and Nuclear Chemistry, 292(3), 1147-1152. Nuclear Data Services (NDS) IAEA. Experimental Nuclear Reaction Data (EXFOR). Database Version of February 26, 2013, IAEA.

Singh, D.P., Sharma V.R., Yadav, A., Singh, P.P., Unnati, Sharma, M.K., Bhardwaj, H.H., Singh, B.P., & Prasad, R. 2013. Surface Wear Studies in Some Materials Using a-induced Reactions. Journal of Nuclear Physics, Material Sciences, Radiation and Applications, 1(1), 1324.

Silakhuddin, & Sudarmono. 2001. Pengembangan Metode Konsentrasi dalam Pengujian Aus dengan Teknik ALT Menggunakan Berkas Proton Akselerator. Prosiding Pertemuan danPresentasi Ilmiah Teknologi Akselerator dan Aplikasinya, P3TM BATAN, Yogyakarta, 7-8 Agustus 2001.

Sudarmono, & Silakhuddin. 2005. Penentuan Keausan Komponen Otomotif dengan Teknik Aktivasi Lapisan Tipis. Prosiding Seminar Material Metalurgi 2005, Pusat Penelitian Metalurgi LIPI.




DOI: https://doi.org/10.21831/jps.v20i2.9596

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2015 Jurnal Penelitian Saintek



 p-ISSN: 1412-3991 || e-ISSN: 2528-7036

Indexed by:

     

View My Stats