DESIGN OF A MOTORCYCLE CAMSHAFT COPYING MACHINE

Raynaldi Prima Kurnia Putra; Muhammad Iqbal Prihanto; Sudarwanto

doi:10.21831/jamat.v2i2.2466

Authors

Raynaldi Prima Kurnia Putra Universitas Negeri Yogyakarta
Muhammad Iqbal Prihanto Universitas Negeri Yogyakarta
Sudarwanto Universitas Negeri Yogyakarta

DOI:

https://doi.org/10.21831/jamat.v2i2.2466

Keywords:

Motorcycle camshaft copy machine, Feasibility, Accuracy

Abstract

This research aims to design, develop, and evaluate the feasibility and accuracy of a motorcycle camshaft copy machine as an alternative solution to protect the privacy of modified camshafts from being copied or duplicated. This research used the ADDIE development model, involving: (1) problem analysis and needs analysis, which then produced a motorcycle camshaft copy machine; (2) the design phase, resulting in a Safety Factor of 1.23 ul with a load of 22,046 lb force or 10 kg; (3) the development phase, including the process of cutting the frame steel, welding to make the frame, drilling to make holes in the frame steel, assembling the motorcycle camshaft copy machine components, and painting; (4) the implementation phase, consisting of a feasibility test with a result of "very feasible," suggesting that the motorcycle camshaft copy machine can be used in workshops; and (5) the evaluation phase, which resulted in good accuracy of the camshaft copy machine. The results of this study indicate that: (1) the motorcycle camshaft copy machine has dimensions of 60 cm in length, 50 cm in width, and 75 cm in height, weighs 26.5 kg, and has a power of 245 watts. (2) The motorcycle camshaft copy machine is declared "very feasible", with a value of 89.23%. (3) The motorcycle camshaft copy machine has good accuracy with an accuracy of ± 0.13 mm.

Downloads

Download data is not yet available.

References

[1] N. C. J. M. K. T. S. Kresnanto, "Model Pertumbuhan Sepeda Motor Berdasarkan Produk Dosmetik Regional Bruto (PRDB) Perkapita (Studi Kasus Pulau Jawa)," vol. 25, no. 1, pp. 107-114, 2019. https://doi.org/10.14710/mkts.v25i1.18585

[2] A. P. ARISKA, "PENGARUH KUALITAS PRODUK, DESAIN PRODUK DAN HARGA TERHADAP KEPUTUSAN PEMBELIAN SEPEDA MOTOR VARIO PADA KONSUMEN DI KOTA LHOKSEUMAWE," Universitas Malikussaleh, 2025.

[3] N. Hidayat, A. Arif, M. Y. Setiawan, and M. J. J. M. M. Masykur, Inovasi dan Teknologi, "Perbedaan Penggunaan Camshaft Racing Terhadap Konsumsi Bahan Bakar Spesifik dan Emisi Gas Buang Pada Motor 4 Tak," vol. 8, no. 2, pp. 143-153, 2022.

[4] A. Hariyanto, M. F. Ihsan, M. F. Ihsan, M. Abdal, and M. Abdal, "Pembuatan Alat Simulasi Motor Bakar 4 Langkah Sebagai Media Pembelajaran," Politeknik Negeri Ujung Pandang, 2021.

[5] J. J. J. M. M. G. Gunawan, "RANCANG BANGUN MESIN GERINDA PENGUBAH SUDUT CAMSHAFT (NOKEN AS) KHUSUS MOTOR 4 TAK," vol. 1, no. 2, pp. 9-19, 2023.

[6] I. M. Syahid, N. A. Istiqomah, and K. J. J. o. I. M. R. Azwary, "Model ADDIE dan ASSURE dalam pengembangan media pembelajaran," vol. 2, no. 5, 2024.

[7] Y. Sudheer, C. J. I. J. o. A. T. Raghunathareddy, and I. research, "Design and analysis of camshaft," vol. 10, no. 8, pp. 829-848, 2018.

[8] N. T. Bunga, H. Sukma, H. Hariri, Y. J. J. A. J. I. R. Sihombing, and Inovasi, "Rancang Bangun Mesin Gerinda Copy Camshaft," pp. 17-25, 2019. 10.35814/asiimetrik.v1i1.214

[9] A. Aljufri, A. Rahman, S. Akmal, R. Firmansyah, and A. A. J. J. T. Chaniago, "PERANCANGAN MESIN MODIFIKASI CAMSHAFT TIPE SINGLE CUTTER MENGGUNAKAN AUTODESK INVENTOR," vol. 15, no. 2, pp. 299-304, 2023. https://doi.org/10.24853/jurtek.15.2.299-304

[10] M. D. Yanthi, L. Bhilawa, and C. S. J. M. I. Siregar, "Kelayakan Buku Ajar Analisis dan Perancangan Sistem Informasi," vol. 27, no. 2, pp. 292-299, 2022. https://doi.org/10.23887/mi.v27i2.43997

[11] B. A. J. M. I. Girawan, "DESAIN DAN UJI PERFORMA MESIN GERINDA PENDUPLIKAT POROS CAM UNTUK APLIKASI BALAP MOTOR," vol. 16, no. 2, pp. 1-9, 2022. https://doi.org/10.24269/mtkind.v16i2.6000