Design and Experimental Evaluation of a Light Cut-off (Baffle) Plate for Aftermarket LED Motorcycle Headlamps

Dwi Prasetyo; Elky Fakhriza; Beni Setya Nugraha

doi:10.21831/jamat.v2i2.2462

Authors

Dwi Prasetyo Univesitas Negeri Yogyakarta
Elky Fakhriza Univesitas Negeri Yogyakarta
Beni Setya Nugraha Univesitas Negeri Yogyakarta

DOI:

https://doi.org/10.21831/jamat.v2i2.2462

Keywords:

LED, Light distribution, Light intensity, Efficiency

Abstract

This study aims to determine the impact of replacing halogen lights with LED lights on two-wheeled vehicles, focusing on energy efficiency, light brightness levels, and operational temperatures of the lights to support road safety in areas with minimal road lighting, as well as on adjusting the light distribution of the applied LED lights. The method used was an experiment conducted on variables for which data were unavailable, necessitating manipulation of the research object. The experiment was conducted using a Honda Supra 125 FI motorcycle, with measurements of light intensity (lux), power consumption (watts), battery current (V), electric current (A), and operating temperature (°C). The known impact became a reference for regulating LED light distribution. The test shows that applying a barrier plate design to LED lights can provide focused lighting through its light distribution patterns. The application of the baffle plate design to LED lights provided focused lighting through its light distribution patterns. The use of LED lights provided a slightly higher intensity (6.4%) and an energy consumption efficiency 60% higher, with a reduction in operating temperature of 64%. The application results show that the light control plate successfully forms a bright-dark cut-off, with a uniform light distribution and consistent light intensity of 1854 lux. This indicates that the tested LED lamp maintains stable lighting performance without a decrease in brightness.

Downloads

Download data is not yet available.

References

[1] A. Maulana, R. Maulana, and H. Fitriyah, “Perancangan dan Implementasi Headlamp Pada Sepeda Motor Sebagai Pengatur Jarak Aman Pancaran Cahaya Dengan Menggunakan Sistem LED Matrix,” Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, vol. 2, no. 10, pp. 3984–3992, 2018.

[2] M. Amiruddin and D. Rohmantoro, “Modifikasi Sistem Penerangan Aho Dengan Pengisian Fullwave Untuk Meningkatkan Arus Dan Tegangan Pengisian Pada Motor Honda Scoopy,” Journal of Automotive Technology Vocational Education, vol. 1, no. 2, pp. 9–18, 2020.

[3] R. Rizki, M. M. A. Sawali, and D. Irfansyah, “Utilization of Stabilizer Technology in Lights for Motorcycle,” International Journal of Research and Applied Technology (INJURATECH), vol. 3, no. 1, pp. 171–178, 2023.

[4] T. Sugiarto, M. A. Rizal, D. Fernandez, and A. Arif, “Analisis penggunaan beberapa jenis lampu utama sepeda motor terhadap intensitas cahaya,” JTPVI: Jurnal Teknologi dan Pendidikan Vokasi Indonesia, vol. 1, no. 1, pp. 133–144, 2023.

[5] M. Beatrix, E. Setyaningsih, H. S. Utama, and Y. Calvinus, “Analisis Umur Lampu Berdasarkan Switching Cycles,” Journal of Electrical Engineering and Computer (JEECOM), vol. 5, no. 2, pp. 208–214, 2023.

[6] J. T. Waluyo and N. S. Widodo, “Pengendali Lampu LED Matrix Headlamp pada Kendaraan Bermotor,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 1, no. 1, pp. 35–45, 2019. https://doi.org/10.12928/biste.v1i1.834

[7] T. Sefer, R. Ayaz, A. Ajder, and I. Nakir, “Performance investigation of different headlights used in vehicles under foggy conditions,” Sci Rep, vol. 13, no. 1, p. 4698, 2023.

[8] Y. A. Koedoes, H. T. Mokui, and A. N. Aliansyah, “Analisis Perbandingan Lampu LED Dengan Lampu Halogen Pada Air Field Lighting (AFL) Sebagai Upaya Efisiensi Penggunaan Energi Listrik di Bandar Udara Halu Oleo,” Resistor: Jurnal Pendidikan Vokasional Teknik, vol. 1, no. 1, pp. 33–44, 2023. https://doi.org/10.36709/resistor.v1i1.18

[9] M. C. Akbar, “Analisa Peningkatan Efisiensi Daya Listrik Runway Edge Light Di Bandar Udara Minangkabau Dengan Lampu LED,” Airman: Jurnal Teknik Dan Keselamatan Transportasi, vol. 5, no. 2, pp. 54–62, 2022. https://doi.org/10.46509/ajtk.v5i2.230

[10] R. K. Chidambaram and R. Arunachalam, “Automotive headlamp high power LED cooling system and its effect on junction temperature and light intensity,” Journal of Thermal Engineering, vol. 6, no. 6, pp. 354–368, 2020.