Developing a model of competency and expertise certification tests for vocational high school students

Authors

  • Pardjono Pardjono Yogyakarta State University, Indonesia
  • Sugiyono Sugiyono Yogyakarta State University, Indonesia
  • Aris Budiyono Semarang State University, Indonesia

DOI:

https://doi.org/10.21831/reid.v1i2.6517

Keywords:

CECT model, VHS students, Mechanical Engineering, SPU

Abstract

This study aims to: (1) develop, produce, and investigate the appropriateness model of competency and expertise certification tests for vocational high school (VHS) students of the Mechanical Engineering expertise competency.To attain the objectives, the researcher conducted a research and development study consisting of 10 steps. The research product was validated by experts, VHS teachers, and lecturers at Mechanical Engineering Education through Focus Group Discussion (FGD), and the field tryout conducted at SMK Warga Surakarta and SMK Bhineka Karya Simo, Boyolali, Central Java. The results of the study are. (1) The study produces a model of Competency and Expertise Certification Tests Based on the School Production Unit (CECT_SPU) for VHS Students of the Mechanical Engineering Expertise Competency; (2) The CECT_SPU model satisfies the criteria for a good modelby a mean score of 3.557; (3) The mean score of the model implementation in the tryouts were 3.670 in the individual tryout and 3.730 in the small-group tryout;  (4) The CECT_SPU model satisfies the criteria for an effective modelby a mean score of 3.730; (5) The CECT_SPU model satisfies the criteria for an efficient modelby a mean score of 3.780; (6) The CECT_SPU model satisfies the criteria for a practical model; by a mean score of 3.700.

Author Biographies

Pardjono Pardjono, Yogyakarta State University

Pardjono was born on 2 September 1953. He currently works as a senior lecturer in the Faculty of Engineering and Graduate School of Yogyakarta State University. He graduated achieving bachelor degree in 1977 from Yogyakarta Institute of Teacher Education and Educational Sciences (recently known as Yogyakarta State University), Indonesia, majoring in Mechanical Engineering Education. In 1986, he attained master degree in Industrial Arts and Technology Education from State University of New York, USA. His doctoral degree in Cognitive Education was attained in 2000 from Deakin University, Australia.

Sugiyono Sugiyono, Yogyakarta State University

Sugiyono was born on 14 December 1953. He works as a senior lecturer in the Faculty of Engineering, Yogyakarta State University, Indonesia. He attained his bachelor degree in 1977 from Yogyakarta Institute of Teacher Education and Educational Sciences (recently known as Yogyakarta State University) majoring in Mechanical Engineering Education. In 1985, he achieved his master degree from Bandung Institute of Teacher Education and Educational Sciences (recently known as Indonesian University of Education) majoring in Educational Management. His doctoral degree was attained in 1990 from the same major and university.

Aris Budiyono, Semarang State University

Aris Budiyono was born on 5 April 1967. He worked as a lecturer in the Department of Mechanical Engineering, Faculty of Engineering, Semarang State University. He attained his doctoral degree in 2015 from Yogyakarta State University, majoring in Vocational Education.

References

Azwar, Saifuddin. (2003). Tes Prestasi: fungsi dan pengembangan pengukuran prestasi belajar. Yogyakarta: Pustaka Belajar.

Badan Pusat Statistik. 2011. Data strategis BPS.

Balitbangda.(2008). Laporan penelitian tentang keterkaitan pendidikan dan penyedia lapangan kerja di Jawa Tengah. Diambil pada tanggal 9 Februari 2011 pada http://gerbangtani.com/litbang/hasil_penelitian/2-pendidikandanlapkerja.pdf

Borg, W.R & Gall, M.D. (1989). Educational research : An introduction. Fourth edition. New York. Longman.

Depdikbud.(1997). Ketrampilan menjelang 2020 untuk era Global.

Depdiknas. (2004b). Direktori lembaga sertifikasi profesi dan tempat uji kompetensi, Ditektorat Jendral Pendidikan Dasar dan Menengah: Jakarta

Guilford, J. P. (1950). Fundamental statistics in psychology and education. Second ed. New York: McGraw-Hill.

Gunawan, Ricky. (2006). Relevansi kompetensi lulusan SMK dengan tuntutan dunia kerja.Diambil pada tanggal 2 Agustus 2011, dari http://file.upi.edu/Direktori/FPTK/JUR._PEND._TEKNIK_MESIN/195105011980021-RICKY_GUNAWAN/ MAKALAH_SEMNAS_PTK_2006.pdf.

Handoko, T. Hani, 1999. Manajemen.Edisi kedua. Yogyakarta: BPFE.

Nunnally, J.C. (1981). Psychomatric threory.TMH edition. New Delhi: Tata McGraw-Hill Publishing Company Limited

Samsudi, dkk (2009).Uji Kompetensi siswa SMK dalam rangka Ujian Nasional. Kajian SMK, Diektorat Pembinaan SMK Depdiknas

Downloads

Published

2015-12-31

How to Cite

Pardjono, P., Sugiyono, S., & Budiyono, A. (2015). Developing a model of competency and expertise certification tests for vocational high school students. REID (Research and Evaluation in Education), 1(2), 129–145. https://doi.org/10.21831/reid.v1i2.6517

Issue

Vol. 1 No. 2 (2015): December

Section

Articles

Citation Check

License

The authors submitting a manuscript to this journal agree that, if accepted for publication, copyright publishing of the submission shall be assigned to REID (Research and Evaluation in Education). However, even though the journal asks for a copyright transfer, the authors retain (or are granted back) significant scholarly rights.

The copyright transfer agreement form can be downloaded here: [REID Copyright Transfer Agreement Form] 


The copyright form should be signed originally and sent to the Editorial Office through email to reid.ppsuny@uny.ac.id

 

Creative Commons License
REID (Research and Evaluation in Education) by http://journal.uny.ac.id/index.php/reid is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.