STUDI EKSPERIMEN KUAT LEKAT MORTAR BIASA PADA PASANGAN BETON RINGAN AERASI

Authors

  • Yulianto Hendra, Imam Muchoyar

DOI:

https://doi.org/10.21831/inersia.v10i2.9962

Abstract

This study aims to determine the capacity of shear strength aerated lightweight concrete (AAC)
with ordinary mortar and knowing the effective of mortar mix of aerated lightweight concrete.
Aerated lightweight concrete is composed of a pair of aerated lightweight concrete using
ordinary mortar binder. This research uses experimental study approach with 1PC:4 Ps; 1PC:
5PS; 1PC: 6PS in proportion mix. The test object pair aerated lightweight concrete "Z" made of
two pieces of lightweight measuring 10 x 10 x 20 cm. The data analysis used descriptive
quantitative. The test result showed that the compressive strength and tensile strength of mortar
with 1PC:4PS; 1PC:5PS are 6,526MPa and 0,075MPa. The damage crack pattern is interface
failure; and effective composition of mortar is 1PC: 4Ps in proportion mix.
Keywords: Autoclaved Aerated Concrete, mortar.

Author Biography

Yulianto Hendra, Imam Muchoyar


Yulianto Hendra1, Imam Muchoyar2

1,2Jurusan Pendidikan Teknik Sipil dan Perencanaan FT-UNY
Imam.muchoyar@gmail.com

Downloads

How to Cite

Imam Muchoyar, Y. H. (2016). STUDI EKSPERIMEN KUAT LEKAT MORTAR BIASA PADA PASANGAN BETON RINGAN AERASI. Inersia : Jurnal Teknik Sipil Dan Arsitektur, 10(2). https://doi.org/10.21831/inersia.v10i2.9962

Issue

Vol. 10 No. 2 (2014): Desember

Section

Articles

License

Authors who publish with INERSIA journal agree to the following terms:

  1. Authors retain copyright and grant the INERSIA journal right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Lisensi Creative Commons
INERSIA by https://journal.uny.ac.id/index.php/inersia was distributed under a Creative Commons Attribution 4.0 International License