PENGARUH PENGGUNAAN KAPUR BAKAR DAN KAPUR GILING (MILL) TERHADAP KUAT TEKAN SPESI

Authors

  • Endaryanta Endaryanta

DOI:

https://doi.org/10.21831/inersia.v1i2.8242

Abstract


ABSTRACT
Burned and raw limestone powder is a kind of binder that has been widely
used in traditional construction of masonry and clay brick wall. Nowadays,
limestone powder also widely used in many construction projects as a portland
cement admixture. This research is designed to examine the effects of burned
and raw limestone powder on the compressive strength of mortar.
This research has been done with experimental method using various
composition in mortar mix design. The compositions that used in this research
are 1:1/4:3, 1:3/4:3, 1:1:3 and 1:2:3 of portland cement, limestone powder and
sand, with six standard cubes for each average of mortar compressive strength,
that have been tested in the Laboratory of Building Material, Department of Civil
Engineering and Planning Education, Faculty of Engineering in State University
of Yogyakarta.
Test results indicate that (a) average of mortar compressive strength using
1:1/4:3 composition of portland cement, limestone powder and sand is 24,79
MPa for burned limestone powder and 16,3 MPa for raw limestone powder, (b)
average of mortar compressive strength using 1:3/4:3 composition of portland
cement, limestone powder and sand is 14,14 MPa for burned limestone powder
and 13,28 MPa for raw limestone powder, (c) average of mortar compressive
strength using 1:1:3 composition of portland cement, limestone powder and sand
is 12,28 MPa forburned limestone powder and 7,78 MPa for raw limestone
powder, (d) average of mortar compressive strength using 1:2:3 composition of
portland cement, limestone powder and sand is 8,56 MPa for burned limestone
powder and 7,18 MPa for raw limestone powder, (e) There is a significant
difference of mortar compressive strength using burned limestone powder and
raw limestone powder, (f) the use of burned limestone powder as portland cement
admixture is better than raw limestone powder that indicated from the result of
compressive strength tests.
Keywords: nlortar, conzpressive strength, lilnestone po~vder.

Author Biography

Endaryanta Endaryanta


Stat Pengajar Fakultas Teknik UNY

Downloads

How to Cite

Endaryanta, E. (2016). PENGARUH PENGGUNAAN KAPUR BAKAR DAN KAPUR GILING (MILL) TERHADAP KUAT TEKAN SPESI. Inersia : Jurnal Teknik Sipil Dan Arsitektur, 1(2). https://doi.org/10.21831/inersia.v1i2.8242

Issue

Vol. 1 No. 2 (2005): September

Section

Articles

License

Authors who publish with INERSIA journal agree to the following terms:

  1. Authors retain copyright and grant the INERSIA journal right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Lisensi Creative Commons
INERSIA by https://journal.uny.ac.id/index.php/inersia was distributed under a Creative Commons Attribution 4.0 International License