PENGARUH TEPUNG LIMBAH TEGEL KERAMIK SEBAGAI FILLER TERHADAP PERMEABILITAS ADUKAN

Authors

  • V. Lilik Hariyanto

DOI:

https://doi.org/10.21831/inersia.v1i1.8236

Abstract


ABSTRACT
This research aimed to investigate the permeability of mortar mixed with
ceramic tile powder, in order to find alternative filler material that can slow the
permeability speed of mortar.
This experimental research used 120 samples in four categories of filler
composition (0%, 35 %,37.5 % and 40 %). Mortar with composition of 1 cement
: 4 sand : 0 ceramic tile powder (by weight) was used as control variable.
Descriptive and statistical methods were used to analyse the results of this
research. The statistical analysis includes the value of mean (M) and standard
deviation (SO).
From the results, it can be concluded that there were significant differences
regarding the value of permeability among the composition variations. The
maximum permeability could be reached by the mortar with composition of 1
cement : 4 sand : 35 % ceramic tile powder and followed by the mortar with
composition of 1 cement: 4 sand: 37.5 % ceramic tile powder and 1 cement: 4
sand: 40% ceramic tile powder.
Keyword: mortar filler, ceramic file powder, permeability

Author Biography

V. Lilik Hariyanto


Stat Pengajar Fakultas Teknik UNY

Downloads

How to Cite

Lilik Hariyanto, V. (2016). PENGARUH TEPUNG LIMBAH TEGEL KERAMIK SEBAGAI FILLER TERHADAP PERMEABILITAS ADUKAN. Inersia : Jurnal Teknik Sipil Dan Arsitektur, 1(1). https://doi.org/10.21831/inersia.v1i1.8236

Issue

Vol. 1 No. 1 (2005): Maret

Section

Articles

License

Authors who publish with INERSIA journal agree to the following terms:

  1. Authors retain copyright and grant the INERSIA journal right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Lisensi Creative Commons
INERSIA by https://journal.uny.ac.id/index.php/inersia was distributed under a Creative Commons Attribution 4.0 International License