OPTIMIZING OF GROOVE ANGLE IN WELDING CAST ALUMINUM A356 FOR PRODUCT REPAIR

Authors

  • Heri Wibowo Universitas Negeri Yogyakarta, Indonesia
  • Arif Marwanto Universitas Negeri Yogyakarta, Indonesia
  • Raka Hilmi Syah Putera Universitas Negeri Yogyakarta, Indonesia
  • Ardani Ahsanul Fakhri Universitas Negeri Yogyakarta, Indonesia

DOI:

https://doi.org/10.21831/dinamika.v10i1.84120

Keywords:

Cast product, Cast aluminum, Groove angle, Tensile test, Impact test

Abstract

The purpose of this study was to investigate the effect of groove angle on the tensile strength, impact toughness, and hardness of A356 cast aluminum and to determine the most optimal groove angle for welding A356 cast aluminum. The research method used was a pure experiment by conducting tensile, impact, and hardness tests on welding specimens with groove angles of 0°, 30°, 55°, and 75°.  The test results showed that the 75o groove angle had advantages over other groove angles with a maximum stress of 26.396 N/mm2, a maximum strain of 10.341%, an elastic modulus of 1625.144 N/mm2, an impact toughness of 0.1518 J/mm2, and a Vickers hardness of 24.7 HVN. Based on the test results, it was concluded that the groove angle of 75o is the most optimal angle for welding A356 cast aluminum in the context of repairing cast aluminum products.

References

Davis, J. R. (1993). ASM Specialty Handbook : Aluminum and Aluminum Alloys. ASM Internasional.

Husnul Fata, Muhammad Razi, & Syukran. (2020). Pengaruh variasi sudut kampuh bevel groove terhadap kekuatan tarik material Stainless Steel 304. Journal of Welding Technology, 2(1).

Kaufman, J. G. (2004). Aluminum Alloy Castings: Properties, Processes and Applications. ASM International.

Kumar, S., Singh, R., & Mishra, R. S. (2019). Effect of groove geometry on weld quality in aluminum alloys: A review. Materials Science and Engineering, 123–134.

M. D. Almanda, H. Yudo, & U. Budiarto. (n.d.). Analisa Pengaruh Variasi Sudut Kampuh Terhadap Kekuatan Tarik Aluminium 6061 Dengan Gas Pelindung Argon Grade A dan Grade C Pada Pengelasan GTAW. Jurnal Teknik Perkapalan, 9(1), 130–138.

Malik, M., Setiawan, I. C., & Rahmalina, D. (2022). Sifat Mekanis Paduan Aluminium A356 dengan Penambahan Unsur Tembaga Hasil Proses Gravity Casting. Jurnal Teknologi Rekayasa, 7(2), 201–208.

Naufal, A., Jokosisworo, S., & Samuel. (2016). Pengaruh Kuat Arus Listik Dan Sudut Kampuh V Terhadap Kekuatan Tarik Dan Tekuk Alumunium 5083 Pengelasan GTAW. Jurnal Teknik Perkapalan, 256–264.

Rahmatika, A., Ibrahim, S., Hersaputri, M., & Aprilia, E. (n.d.). Studi Pengaruh Variasi Kuat Arus Terhadap Sifat Mekanik Hasil Pengelasan GTAW Alumunium 1050 Dengan Filler ER 4043. Jurnal Polimesin, 47–54.

Ramadhan, F., Irawan, A., & Kurniawan, F. A. (2020). Arus Pengelasan Terhadap Tarik Las SMAW Elektroda E6013 Pada Baja Karbon Rendah. Jurnal SiMeTRi Rekayasa, 2(2), 116–122.

Wang, Y., & Zhang, Z. (2018). Numerical simulation and experimental validation of groove angle effects on aluminum welding. International Journal of Advanced Manufacturing Technology, 97, 5–8.

Yang, P., Song, Y., Wang, J., Hu, F., & Xie, L. (2021). Semiconductor laser cladding of an Fe-based alloy on nodular cast iron. Welding in the World, 65(5), 785–792. https://doi.org/10.1007/s40194-021-01078-3

Zhang, X., Li, Y., & Wang, H. (2020). Optimization of groove angle in aluminum welding for improved tensile strength and reduced porosity. Journal of Materials Processing Technology, 116–125.

Zhou, Q., Zhang, F., & Huang, X. (2017). Aggregate multiple radial basis function models for identifying promising process parameters in magnetic field assisted laser welding. Journal of Manufacturing Processes, 28, 21–32. https://doi.org/10.1016/j.jmapro.2017.05.012

Downloads

Published

2025-04-30

How to Cite

Wibowo, H., Marwanto, A., Putera, R. H. S., & Fakhri, A. A. (2025). OPTIMIZING OF GROOVE ANGLE IN WELDING CAST ALUMINUM A356 FOR PRODUCT REPAIR. Jurnal Dinamika Vokasional Teknik Mesin, 10(1). https://doi.org/10.21831/dinamika.v10i1.84120

Issue

Vol. 10 No. 1 (2025)

Section

Articles

Citation Check

License

Authors  submitting  a  manuscript  do  so  on  the  understanding  that  if  accepted  for  publication, the copyright of the article shall be assigned to Jurnal Dinamika Vokasional Teknik Mesin

 

Lisensi Creative Commons