ANALYSIS OF THE APPLICATION OF PERSONAL PROTECTIVE EQUIPMENT IN THE WELDING INDUSTRY

Egi Suryana, Universitas Sultan Ageng Tirtayasa, Indonesia
Sulaeman Deni Ramdani, Universitas Sultan Ageng Tirtayasa, Indonesia

Abstract


The welding industry is one of the informal workplaces at risk of accidents and occupational diseases. Workers can be directly exposed to foreign matter or radiation from visible rays and sparks from the welding process during the welding process. This is a problem for people who are engaged in the profession of welding workers. This study aimed to analyze the application of personal protective equipment used by workers in the welding industry. This research is classified in the type of survey research and data collection techniques by observation, interviews, and questionnaire distribution. The subjects of the study were all workers in the welding workshop of Kec. Bayah welding totaling 30 people using random sampling techniques. The research path consists of 3 stages: preparation, data exploration in the field, and analysis of findings. Data analysis using percentages. Based on the analysis of the use of personal protective equipment in 6 welding workshops, Bayah has 57% in the good category and 33% in the less category. As for the analysis of each indicator, the most significant percentage of use in welding glasses is 76%, and the lowest percentage of skin protection is 56%. This shows that the level of concern of each worker is not balanced towards using all personal protective equipment in the welding process, which can cause very vulnerable work accidents.


Keywords


Personal protective equipment; Welding; Workers

Full Text:

80-88 (PDF)

References


Aditias, R. W., Suroto, & Denny, H. M. (2018). Analisis Kesenjangan Implementasi Standar Keselamatan Kerja Pengelasan SD-36-3020 di PT X Berdasarkan Standard NFPA 51 B : 2014. JKM, 6(5), 625–635.

Adiyanta, F. C. S. (2019). Hukum dan Studi Penelitian Empiris: Penggunaan Metode Survey sebagai Instrumen Penelitian Hukum Empiris. Administrative Law and Governance Journal, 2(4), 697–709. https://doi.org/10.14710/alj.v2i4.697-709

Alfarisi, F., & James. (2015). Analisa penilaian resiko pada proses pengelasan dengan metode job safety analysis (studi kasus: pt. meindo elang indah). JK.

Desatananda Mirza Wijanartien, H. Djoko Windu P Irawan, S. (2019). Penerapan Alat Pelindung Diri (APD) Pada Proses Pengelasan dan Pemotongan Besi di PT INKA Multi Solution (IMS) Madiun. Jurnal Kesehatan, 06.

Ginting, R., Irmayani, & Harahap, A. I. P. M. D. (2020). Hubungan Faktor Personal dan Pengawasan Kerja Dengan Tindakan Tidak Aman pada Pekerja Pengelasan di Bengkel Las Abun Desa Skip Kecamatan Lubuk Pakam Kabupaten Deli Serdang. Jurnal Kesma dan Gizi, 3(1), 98–104.

Malo, O., K, B., Farizal, & Manesi, D. (2019). Identifikasi Bahaya, Penilaian dan Pengendalian Risiko pada Bengkel Praktikum Pengelasan di SMK N 2 Kupang. Komodo Jurnal Pendidikan Teknik Mesin, 3(2).

Peutula, M., Basri, K., & Fahrizal. (2019). Pelaksanaan Kesehatan kerja yang aman , sehat , dan bebas dari meningkatkan efisiensi dan produktivitas kerugian materi bagi pekerja dan akan berdampak pada mas. JURNAL PTM, 3(April 2019), 47–54.

Rahayu, U. T., Effendi, L., & Andriyani. (2018). Penggunaan Alat Pelindung Diri pada Industri Informal Pengelasan di Kecamatan “ X ”, Kota Tangerang Tahun 2017. Environmental Occupational Health and Safety Journal, 1(1).

Rif`ati, E. F., & Sutanto, A. (2018). Analisis Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja di Bidang Industri Migas dengan Pendekatan Risk Asessment Code ( RAC ). 8(3), 10–23.

Sahputra, G., & Siregar, H. (2017). Pengaruh Penyuluhan Dengan Metode Ceramah dan di Kecamatan Percut Sei Tuan Tahun 2013. Jurnal Penelitian Pendidikan Sosial Humaniora, 2(1), 158–173.

Salawati, L. (2015). Analisis Penggunaan Alat Pelindung Mata Pada Pekerja Las. Jurnal Kedokteran Syiah Kuala, 15, 130–134.

Saputra, T. W., Astuti, R. D., & Jauhari, W. (2018). Penerapan Metode Hazard Identification and Risk Asessment Hira Pada Bengkel Las Sinar Arum Semanggi. JTI, 209–214.

Solichin, Endarto, F. E. W., & Ariwinanti, D. (2014). Penerapan Personal Protective Equipment (Alat Pelindung Diri ) Pada. Jurnal Teknik Mesin, 1, 89–103.

Yoto, Kustono, D., Marsono, & Qolik, A. (2020). Pelatihan Manajemen Keselamatan dan Kesehatan Kerja untuk Meningkatkan Keterampilan bagi Tenaga Kerja Bidang Pengelasan di Kota Malang. JP2T, 1(1989), 90–102.

Zeri Yusdinata, Bora, M. A., & Arofah, N. (2018). Analisis Penerapan Keselamatan dan Kesehatan Kerja ( K3 ) Dengan Menggunakan Metode Fishbone Diagram. JT-IBSI, 3(2), 127–133.




DOI: https://doi.org/10.21831/dinamika.v8i1.60583

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Jurnal Dinamika Vokasional Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Lisensi Creative Commons 

Jurnal Dinamika Vokasional Teknik Mesin by http://journal.uny.ac.id/index.php/dynamika was distributed under a Creative Commons Attribution 4.0 International License.


 

 

 

in collaboration with:

 

 

View My Stats