THE INFLUENCE OF THE MATERIAL TYPE ON THE RESERVOIR AIR PRESSURE IN THE KNIFE TOOL HEATING FURNACE

Authors

DOI:

https://doi.org/10.21831/dinamika.v8i2.59566

Keywords:

Reservoir, Material, Air Pressure, Heating Furnace

Abstract

A reservoir is a vessel or storage container used to store pressure resulting from the evaporation of a liquid. In its use, the Reservoir's constituent material must be good to produce maximum results. This experimental research aims to study the influence of the reservoir material types, such as aluminum, steel, and stainless steel, on the air pressure produced by each material[R1] . The experiment was conducted by aluminium, steel, and stainless steel material testing. The results showed that aluminum, steel, and stainless steel produce a pressure of 2.00 bar, 2.50 bar, 1.50 bar, respectively.. The comparison of results shows that the type of reservoir material will affect the final result of reservoir pressure.

References

Agustina, I., &; Astuti, D. (2015). Penentuan konduktivitas termal tembaga, kuningan, dan logam besi dengan metode kopling. Prosiding Seminar Nasional Fisika dan Pendidikan Fisika ke-6 (SNFPF) 2015, 6, 30–34. Originally in Indonesian

Aminah, R., Eka, D., Arifin, S., Maslakah, AS, Fisika, J., Matematika, F., & Alam, P. (2013). laju perpindahan panas pada bahan logam. 1–3. Originally in Indonesian

Febrian, M. B., Setiawan, D., &; Hidayati, H. (2019). Sintesis dan karakterisasi molybdenum phthalocyanine sebagai bahan target untuk produksi molibdenum-99 aktivitas spesifik tinggi. 19(3), 556–564. https://doi.org/10.22146/ijc.33218. Originally in Indonesian

Sodikin, I., Waluyo, J., &; Pratiwi, Y. (2016). Desain tungku pemanas untuk panci besi yang ramah lingkungan untuk meningkatkan kapasitas produksi peralatan pertanian. Simposium Nasional RAPI ke-15, 458–463. https://publikasiilmiah.ums.ac.id/handle/11617/8078. Originally in Indonesian

Sugiyono. (2016). Metode Penelitian Pendidikan Pendekatan Kuantitatif, Kualitatif dan R&D. Abjad. Originally in Indonesian

Downloads

Published

2023-10-30

How to Cite

Wijaya, I. A., Hermawan, R., Firizal, H., & Ramadhan, A. A. (2023). THE INFLUENCE OF THE MATERIAL TYPE ON THE RESERVOIR AIR PRESSURE IN THE KNIFE TOOL HEATING FURNACE. Jurnal Dinamika Vokasional Teknik Mesin, 8(2). https://doi.org/10.21831/dinamika.v8i2.59566

Issue

Vol. 8 No. 2 (2023)

Section

Articles

Citation Check

License

Authors  submitting  a  manuscript  do  so  on  the  understanding  that  if  accepted  for  publication, the copyright of the article shall be assigned to Jurnal Dinamika Vokasional Teknik Mesin

 

Lisensi Creative Commons