Analisa Gaya Potong Minimal pada Alat Kupas Singkong Sistem Vertikal

Perwita Kurniawan, Politeknik ATMI Surakarta, Indonesia
Ivanda Bintang Cahya Putra, Politeknik ATMI Surakarta, Indonesia
Tri Hannanto Saputra, Politeknik ATMI Surakarta, Indonesia
Adhi Setya Hutama, Politeknik ATMI Surakarta, Indonesia

Abstract


Proses pengupasan singkong bukanlah hal yang mudah apabila dilakukan secara otomatis. Bentuk singkong yang tidak seragam merupakan tantangan tersendiri dalam mendesain sebuah mesin pengupas singkong. Ketidakseragaman bentuk ini menyebabkan rendahnya efisiensi pengupasan, baik dari segi waktu maupun volume daging yang ikut terkupas. Berdasarkan hal tersebut, maka perlu dikembangkan sebuah model pengupasan yang efisien dan efektif. Salah satu model yang dikembangkan adalah model alat pengupas singkong sistem vertikal. Pada desain alat pengupas ini, dikembangkan sebuah prototype untuk menguji pengaruh desain pisau terhadap gaya yang mempengaruhi ketebalan kupas ketela.  Metode untuk penelitian ini dimulai dari pembuatan desain, dilanjutkan dengan pembuatan purwarupa alat pengupas untuk menguji desain. Penelitian pengambilan gaya potong dilakukan dengan menggunakan pisau potong purwarupa yang memiliki ketebalan 2,00 mm. Pengujian dilakukan secara berulang dengan diferensiasi gaya sebesar 1 N hingga kulit singkong dikupas dengan gaya 20 N. Berdasarkan data hasil pengujian, tampak bahwa untuk mengupas singkong lokal hingga bersih dengan alat kupas kulit singkong sistem vertikal, dibutuhkan gaya potong minimal sebesar 10 N, dengan ketebalan kupas rata-rata 0,43 mm.

Keywords


cassava; peeler; cutting force

Full Text:

137-145 (PDF)

References


Abdulkadir Baba Hassan. (2012). Design and Fabrication of a Cassava Peeling Machine. IOSR Journal of Engineering, 02(06), 01–08. https://doi.org/10.9790/3021-02630108

Adekunle, A. S., Ohijeagbon, I. O., Kareem A. Akande, Y. T., Jilantikiri, L., Sadeeq, A., & Olusegun, H. D. (2018). Development and Performance Evaluation of Cassava Peeling Machine. Adeleke University Journal of Engineering and Technology, 1(1), 66–80. Retrieved from aujnet.adelekeuniversity.edu.ng

Ademosun, O. C., Jimoh, M. O., & Olukunle, O. J. (2012). Effect of physical and mechanical properties of cassava tubers on the performance of an automated peeling machine. International Journal of Development and Sustainability, 1(3), 810–822. Retrieved from http://isdsnet.com/ijds-v1n3-14.pdf

Adeniyi, T. O., Isaac, M. O., Okonkwo, C. E., Alake, A. S., & Friday, M. G. (2019). Development of a Ceramic Cassava Peeling-and Washing Machine. Mindanao Journal of Science and Technology, 17, 84–97.

Adetan, D. A., Adekoya, L. O., & Aluko, O. B. (2006). Theory of a mechanical method of peeling cassava tubers with knives. International Agrophysics, 20(4), 269–276.

Ajibola W. A., & Babarinde F. (2016). Design and Fabrication of a Cassava Peeling Machine. International Journal of Engineering Trends and Technology, 42(2), 60–64. https://doi.org/10.14445/22315381/ijett-v42p214.

BPS. (2015). Survei Sosial Ekonomi Nasional, Pengeluaran untuk Konsumsi Penduduk Indonesia 2013. Badan Pusat Statistik Jakarta. 2015.

Diop A., & Calverley D. J. B. (1998). Storage and Processing of Roots and Tubers in the Tropics. Food and Agriculture Organization of the United Nations, Agro-industries and Post-Harvest Management Service, Agricultural Support Systems Division.

Ebunilo, P., Egware, H., & Ukwuaba, S. (2013). Design and Testing of an Experimental Cassava Tuber Peeling Machine. International Journal of Engineering Research in Africa, 9, 35–42. https://doi.org/10.4028/www.scientific.net/JERA.9.35

Egbeocha, C. C., Asoegwu, S. N., & Okereke, N. A. (2016). A review of the performance of cassava peeling machines in Nigeria. Futo Journal Series (FUTOJNLS), 2(1), 140–168

Jimoh, Musa Omotayo, Olukunle, O. J., & Manuwa, S. I. (2016). Modeling of cassava peeling performance using dimensional analysis. Agricultural Engineering International: CIGR Journal, 18(2), 360–367

Jimoh, M. O., & Olukunle, O. J. (2012). An Automated Cassava Peeling System for the Enhancement of Food Security in Nigeria. Nigerian Food Journal, 30(2), 73–79. https://doi.org/10.1016/s0189-7241(15)30038-2

Kementerian Pertanian. (2016). Outlook Komoditas Pertanian Tanaman Pangan: Ubi Kayu. Jakarta; Pusat Data dan Sistem Informasi Pertanian Kementerian Pertanian.

Kolawole, P. O., Agbetoye, L., & Ogunlowo, S. A. (2010). Sustaining world food security with improved cassava processing technology: The Nigeria experience. Sustainability, 2(12), 3681–3694. https://doi.org/10.3390/su2123681

Kolawole, O. P. (2012). Evaluation of Cassava Tuber Resistance to Deformation. 1(3), 39–43.

Le, A. N. (2012). Innovations At the Base of the Pyramid - Pedal Powered Cassava Peeling Machine. Diploma work, IDEM05 20122 Industrial Design, Lund University.

Odigboh, E. U. (1976). A cassava peeling machine: Development, design, and construction. Journal of Agricultural Engineering Research, 21(4), 361–369. https://doi.org/10.1016/0021-8634(76)90056-1

OEC. (2017). Cassava. Retrieved November 27, 2019, from The Observatory of Economic Complexity website: https://oec.world/en/profile/hs92/0714/

Ogunlowo, S., Olaleye, S. A., & Fasunla, M. S. (2016). Performance Evaluation of the Automated System for Cleaning, Peeling and Washing Cassava Tubers. International Journal of Advances in Agricultural and Environmental Engineering, 3(2). https://doi.org/10.15242/ijaaee.u0716202

Ohwovoriole, E. N., Oboli, S., & Mgbeke, A. C. C. (1988). Studies and Preliminary Design for a Cassava Tuber Peeling Machine. Transactions of the American Society of Agricultural Engineers, 31(2), 380–385

Okoronkwo, C. A., Ezurike, B. O., Adjogbe, A. S., & Oguoma, O. N. (2019). The use of locally sourced materials in the design and analysis of a portable cassava peeling machine. International Journal of Scientific and Technology Research, 8(11), 3124–3131.

Olawale, J. O. (2007). Development of a cassava peeling machine for cottage industries. Conference on International Agricultural Research for Development Held at the University of Kessel-Witzenhausen and the University of Gottingen, 9–11.

Olukunle, O. J., & Akinnuli, B. O. (2013). Theory of An Automated Cassava Peeling System. International Journal of Engineering and Innovative Technology, 2(8), 177–184.

Olukunle, O. J., & Akinnuli, B. O. (2012). Performance Evaluation of a Single Action Cassava. Journal of Emerging Trends in Engineering and Applied Sciences, 3(5), 806–811

Olukunle, O. J., & Akinnuli, B. O. (2013). Theory of An Automated Cassava Peeling System. International Journal of Engineering and Innovative Technology, 2(8), 177–184.

Olutosin O., I., Dare A., A., Ayowumi R., S.-A., Oluwaseun O., O., Kehinde M., A., & Olumide O., T. (2017). Influence of Some Physical Properties of Cassava Tubers on Mechanical Compressive Cracking force of TMS 30572 and TMS 4(2)1425 Cassava Varieties. American Journal of Food Science and Technology, 5(6), 233–237. https://doi.org/10.12691/ajfst-5-6-2.

Oriola K. O., & Raji A. O. (2015). Compressive strength properties of cassava roots as affected by moisture content. Journal of Agricultural Engineering and Technology, 23(1), 48–56.

Priscilla, M. (2017). Performance evaluation of a cassava peeler. Kwame Nkrumah University of Science And Technology.

Sjamsiah, A. dan Suriani. (2018). Analisis Proksimat pada Beras Hibrid yang Terbuat dari Singkong (Manihot Esculentra) dan Labu Kuning (Cucurbita Moschata). Jurnal Sainsmart UIN Alauddin Makassar Vol.VII(1):57-64.

Thayawee Nuboon. (2005). The Development of a Peeling Machine for Cassava (Khon Kaen University). https://doi.org/10.1007/978-1-4614-7990-1

Wibisono, N. dan Sudarno. (2018). IbM Pemanfaatan tentang Mocaf dan Pengolahan Aneka Kue Berbahan Baku Ketela Pohon untuk Meningkatkan Nilai Jual Ketela pohon Badan Kerjasama Antar Desa (BKAD) Tri Mulyo Desa Ngengor, Desa Luworo, Desa Gandul Kecamatan Pilangkenceng, Kabupaten Madiun Provinsi Jawa Timur, Madiun. Universitas Merdeka Madiun.




DOI: https://doi.org/10.21831/dinamika.v7i2.52962

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Jurnal Dinamika Vokasional Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Lisensi Creative Commons 

Jurnal Dinamika Vokasional Teknik Mesin by http://journal.uny.ac.id/index.php/dynamika was distributed under a Creative Commons Attribution 4.0 International License.


 

 

 

in collaboration with:

 

 

View My Stats