An analysis on students' thesis topics and research types in automotive engineering education program

Ibnu Siswanto, (Scopus ID: 57193693471) Universitas Negeri Yogyakarta, Indonesia
Hongbo Ma, Zhejiang Industry Polytechnic College, China
Sigit Kurniawan, Universitas Negeri Yogyakarta, Indonesia

Abstract


This study aims to analyze the topics and types/methods of research in the thesis of students of the Automotive Engineering Education study program, Universitas Negeri Yogyakarta. This research is descriptive research. The types/methods were descriptive models, Action Research, Ex Post-Facto, Research and Development, Evaluation, and Experimental Research (100, 69, 50, 35, 30, and 23 studies respectively). The study was conducted by analyzing 320 student thesis articles published from 2014 to 2018 in the Yogyakarta State University student e-journal. The results showed that the student's thesis topics consisted of 5 research topics, namely: education (139 topics), learning (120 topics), media development (43 topics), university issues (9 topics), and automotive engineering topics (9 pieces). Based on the results of the research, the types/research methods used were categorized into six methods, namely descriptive models (100 studies), classroom action research (69 studies), ex-post-facto (50 studies), research and development (48 studies), evaluation (30 studies), research and experimental (23 studies).


Keywords


Automotive engineering education; research methods; research types; thesis topics

Full Text:

PDF

References


Aditya, E. I., & Sutiman. (2017). Pengaruh minat belajar dan fasilitas belajar terhadap prestasi belajar memelihara/service sistem bahan bakar bensin. E-Jurnal Pendidikan Teknik Otomotif - S1, 21(1), 95–104. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10190

Arifin, Z., Haryana, K., Solikin, M., & Siswanto, I. (2014). Penyelarasan kurikulum jurusan pendidikan teknik otomotif FT UNY berbasis kerangka kualifikasi nasional Indonesia. Jurnal Pendidikan Teknologi Dan Kejuruan, 22(1), 119–126. https://doi.org/10.21831/jptk.v22i1.8844

Creswell, J. W. (2012). Educational research: Planning, conducting, and evaluating quantitative and qualitative research (4th ed.). Pearson Education. http://repository.unmas.ac.id/medias/journal/EBK-00121.pdf

Emilio Álvarez-Arregui, Rodríguez-Martín, A., Madrigal-Maldonado, R., Grossi-Sampedro, B.-Á., & Arreguit, X. (2017). Ecosystems of media training and competence: International assessment of its implementation in higher education. Comunicar, 25(1), 105–114. https://doi.org/10.3916/C51-2017-10

Fathumina, E. (2018). Analisis produktivitas bengkel Nissan Datsun Yogyakarta (Studi motivasi kerja dan produktivitas kerja teknisi) [Universitas Negeri Yogyakarta]. https://eprints.uny.ac.id/56958/1/Naskah Tugas Akhir Skripsi Erfin Fathumina FIX Print.pdf

Fehling, C. D., Muller, A., & Aehnelt, M. (2016). Enhancing vocational training with augmented reality. Proceedings of the 16th International Conference on Knowledge Technologies and Data-Driven Business. https://www.researchgate.net/profile/Mario-Aehnelt/publication/309373052_Enhancing_Vocational_Training_with_Augmented_Reality/links/5847afb908ae61f75ddff402/Enhancing-Vocational-Training-with-Augmented-Reality.pdf

Fitrianto, M. A., & Sudiyanto. (2018). Penerapan metode tutor sebaya untuk meningkatkan hasil belajar siswa pada mata pelajaran Teknologi Dasar Otomotif.

Haryana, K., Pambayun, N. A. Y., Sudiyanto, S., & Sutiman, S. (2019). Mapping the graduate quality of Automotive Engineering Education (S1) Study Program FT UNY. Journal of Physics: Conference Series, 1273(1), 012034. https://doi.org/10.1088/1742-6596/1273/1/012034

Hasanah, H., & Malik, M. N. (2018). Teaching factory-based for entrepreneurship learning model in vocational high schools. International Conference on Indonesian Technical Vocational Education and Association (APTEKINDO 2018), 209–213. http://eprints.unm.ac.id/16362/1/Artikel Prosiding International Conference - Teaching Factory-Based for Entrepreneurship....pdf

Hastowo, S., & Haryana, K. (2016). Manajemen sarana praktik program studi teknik ototronik SMK Taman Karya Madya Pertambangan Kebumen. E-Jurnal Pendidikan Teknik Otomotif - S1, 13(2), 1–13. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/2895

Irawan, B., & Solikin, M. (2017). Pengembangan media pembelajaran praktik pembangkit sinyal dan counter pada mata kuliah elektronika analog dan digital. Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 95–101. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10129

Jan Spilski, Giehl, C., Schlittmeier, S., Lachmann, T., Exner, J.-P., Makhkamova, A., Werth, D., Schmidt, M., & Pietschmann, M. (2019). Potential of VR in the vocational education and training of craftsmen. Proceedings of the 19th International Conference on Construction Applications of Virtual Reality, 181–190. https://www.researchgate.net/publication/337339626_POTENTIAL_OF_VR_IN_THE_VOCATIONAL_EDUCATION_AND_TRAINING_OF_CRAFTSMEN

Muhlisin, M., & Yuswono, L. C. (2018). Model pembelajaran kooperatif tipe Jigsaw untuk meningkatkan keaktifan dan hasil belajar PDTO. E-Jurnal Pendidikan Teknik Otomotif - S1, 24(1), 82–90. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/12222

Murwanto, A. D., & Wakid, M. (2017). Pengembangan desain perangkat aerodinamik mobil FG16 ditinjau dari hasil simulasi numeric aliran udara eksternal. E-Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 122–130. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10132

Organisation for Economic Co-operation and Development. (2015). Frascati Manual 2015: Guidelines for collecting and reporting data on research and experimental development. OECD publications. https://doi.org/10.1787/9789264239012-en

Purnama, H. D., & Sudiyanto Sudiyatno. (2017). Pengaruh status keluarga terhadap minat siswa masuk perguruan tinggi. E-Jurnal Pendidikan Teknik Otomotif - S1, 21(1), 13–23. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10183

Santosa, D. T., & Us, T. (2016). Faktor-faktor penyebab rendahnya motivasi belajar dan solusi penanganan pada siswa kelas XI jurusan Teknik Sepeda Motor. E-Jurnal Pendidikan Teknik Otomotif S1, 3(2), 14–21. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/2896

Setiawan, W. H., & Yuswono, L. C. (2017). Penerapan metode pembelajaran Team Game Tournament (TGT) untuk meningkatkan keaktifan dan hasil belajar. E-Jurnal Pendidikan Teknik Otomotif S1, 20(1), 56–67. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10165

Shodiq, S. (2018). Analisis butir soal ujian akhir semester gasal mata pelajaran pemeliharaan listrik kendaraan ringan kelas XII di SMK Negeri 2 Klaten tahun ajaran 2017/2018 [Universitas Negeri Yogyakarta]. https://eprints.uny.ac.id/57059/

Siswanto, I., & Sampurno, Y. G. (2015). Faktor-faktor penghambat pengerjaan tugas akhir skripsi mahasiswa pendidikan teknik otomotif FT UNY. Jurnal Taman Vokasi, 3(1), 629–642. https://doi.org/10.30738/jtv.v3i1.313

Sodiq, R., & Haryana, K. (2017). Evaluasi penjaminan mutu pendidikan di SMK Negeri 1 Magelang. E-Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 111–121. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10131

Surani, D., Kusuma, J. W., & Kusumawati, N. (2020). Platform online dalam perkuliahan pada masa pandemi Covid-19. Jurnal Pendidikan : Teori, Penelitian, Dan Pengembangan, 5(9), 1338–1349. https://doi.org/10.17977/jptpp.v5i9.14057

Suyanto, W., Budiman, A., Fatah, A., Efendi, Y., Latif, I., Yunanto, H. H., & Saputra, M. (2019). Competency analysis the field of expertise of automotive engineering in automotive engineering curriculum of FT UNY. Journal of Physics: Conference Series, 1273(1), 012035. https://doi.org/10.1088/1742-6596/1273/1/012035

Syakura, V. H., & Us, T. (2017). Pengembangan multimedia pembelajaran sistem kopling bidang keahlian teknik kendaraan ringan SMK Muhammadiyah 3 Yogyakarta. E-Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 131–137. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10133

Uerz, D., Volman, M., & Kral, M. (2018). Teacher educators’ competences in fostering student teachers’ proficiency in teaching and learning with technology: An overview of relevant research literature. Teaching and Teacher Education, 70, 12–23. https://doi.org/10.1016/j.tate.2017.11.005

Wagiran, W. (2016). Profil pembelajaran di Fakultas Teknik Universitas Negeri Yogyakarta. Jurnal Pendidikan Vokasi, 6(3), 346–354. https://doi.org/10.21831/jpv.v6i3.10610

Warju, W., Ariyanto, S. R., Soeryanto, S., Hidayatullah, R. S., & Nurtanto, M. (2020). Practical learning innovation: Real condition video-based direct instruction model in vocational education. Journal of Educational Science and Technology, 6(1), 79–91. https://doi.org/10.26858/est.v6i1.12665

Wicaksono, C., & Sofyan, H. (2017). Kontribusi motivasi belajar, lingkungan belajar, dan kebiasaan belajar terhadap prestasi belajar siswa. E-Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 138–144. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10134

Yulfika, A., & Us, T. (2017). Penerapan model snowball throwing untuk meningkatkan keaktifan dan hasil belajar mapel PSPTKR. E-Jurnal Pendidikan Teknik Otomotif - S1, 24(2), 119–129. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/12226

Yuswono, L. C., Martubi, & Sukaswanto. (2014). Profil kompetensi guru sekolah menengah kejuruan teknik otomotif di Kabupaten Sleman. Jurnal Pendidikan Teknologi Dan Kejuruan, 22(2), 173–183. https://doi.org/10.21831/jptk.v22i2.8925




DOI: https://doi.org/10.21831/jpv.v12i1.47310

Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Our journal indexed by:
       

ISSN 2088-2866 (print) || ISSN 2476-9401 (online)

View Journal Visitor Stats