Development of air conditioner split R32 trainer learning media in cooling and air conditioning engineering courses

Fitria Wahyu Ningsih, Universitas Sultan Ageng Tirtayasa, Indonesia
Ilham Akbar Darmawan, (Scopus ID: 57221970167) Universitas Sultan Ageng Tirtayasa, Indonesia
Mohammad Fatkhurrokhman, Universitas Sultan Ageng Tirtayasa, Indonesia

Abstract


This study aims to develop learning media for AC Split R32 in the subject of refrigeration and air conditioning engineering. The method used Research and Development (R&D), the model of research used is Successive Approximation Models 1 (SAM). The model goes through iteration 1 (Evaluate 1, Design 1, Develop 1), iteration 2 (Evaluate 2, Design 2, Develop 2), and iteration 3 (Evaluate 3, and product implementation). The data collection method uses instruments in the form of observations, interviews, literature studies, and questionnaires that use a Likert scale for measurement the instrument. Based on the research analysis results, media trainers get an average of 76 in the "Very Eligible" category. Then the material results get an average of 63.5 which states that job sheets are in the "Very Eligible" category. Meanwhile, for the feasibility test on 30 student respondents, an average of 71.8 was obtained in the "Very Eligible" category. Meanwhile, based on the performance practice assessment, the average result was 83.4 out of 10 students who practiced in the "Good" assessment category. Thus, based on the development research, the trainer and job sheet can be used as learning media.

Keywords


Learning media; refrigeration; Research and Development (R&D); SAM model

Full Text:

PDF

References


Adityawarman, A. (2018). Trainer pendingin ruangan menggunakan AC Split R32 ramah lingkungan sebagai media pembelajaran mata kuliah teknik refrigasi dan tata udara di Universitas Negeri Semarang. Edu Elektrika Journal, 7(2), 27–34. https://doi.org/10.15294/eej.v7i2.29139

Aini, S. N., & Sudira, P. (2015). Pengaruh strategi pembelajaran, gaya belajar, sarana praktik, dan media terhadap hasil belajar patiseri SMK se-Gerbangkertasusila. Jurnal Pendidikan Vokasi, 5(1), 88–102. https://doi.org/10.21831/jpv.v5i1.6077

Allen, M., & Sites, R. (2012). Leaving ADDIE for SAM: An agile model for developing the best learning experiences. American Society for Training & Development Press.

Burke, A. E., Benson, B., Englander, R., Carraccio, C., & Hicks, P. J. (2014). Domain of competence: Practice-based learning and improvement. Academic Pediatrics, 14(2), S38–S54. https://doi.org/10.1016/j.acap.2013.11.018

Emanuelsson, J., & Sahlström, F. (2008). The Price of Participation: Teacher control versus student participation in classroom interaction. Scandinavian Journal of Educational Research, 52(2), 205–223. https://doi.org/10.1080/00313830801915853

Grondzik, W. T. (2007). Air-conditioning System Design Manual (2nd ed.). Elsevier.

Hasan, S. (2013). Analisis perakitan trainer unit berdasarkan aplikasi konsep refrigerasi pada mata kuliah sistem pendingin. https://www.academia.edu/download/57045202/anzdoc.com_analisis-perakitan-trainer-unit-berdasarkan-aplika.pdf

Helle, L., Tynjälä, P., & Olkinuora, E. (2006). Project-based learning in post-secondary education–theory, practice and rubber sling shots. Higher Education, 51(2), 287–314. https://doi.org/10.1007/s10734-004-6386-5

Kementerian Pendidikan dan Kebudayaan Republik Indonesia. (2014). Sistem dan instalasi udara 4. Kementerian Pendidikan dan Kebudayaan Republik Indonesia. https://nos.jkt-1.neo.id/bse/perpustakaan/2/2183_2056.pdf

Lindberg, V. (2003). Learning practices in vocational education. Scandinavian Journal of Educational Research, 47(2), 157–179. https://doi.org/10.1080/00313830308611

Mustapa, M. A. S., Ibrahim, M., & Yusoff, A. (2015). Engaging vocational college students through blended learning: Improving class attendance and participation. Procedia - Social and Behavioral Sciences, 204, 127–135. https://doi.org/10.1016/j.sbspro.2015.08.125

Pane, A., Dasopang, M. D., & Setiawan, A. (2017). Belajar dan pembelajaran. FITRAH: JURNAL KAJIAN ILMU-ILMU KEISLAMAN, 3(2), 333–352. https://doi.org/10.24952/fitrah.v3i2.945

Parwata, K. Y. L., & Sudiatmika, A. A. I. A. R. (2020). The effectiveness of learning tools in science learning. Journal of Physics: Conference Series, 1503, 12049. https://doi.org/10.1088/1742-6596/1503/1/012049

Pavlova, M. (2009). The vocationalization of secondary education: The relationships between vocational and technology education. In R. Maclean & D. Wilson (Eds.), International Handbook of Education for the Changing World of Work (pp. 1805–1821). Springer. https://doi.org/10.1007/978-1-4020-5281-1_122

Sudarsono, B. (2018). Level feasibility media learning system Air Conditioner (AC) to increase learning result. Jurnal Taman Vokasi, 6(1), 18–24. https://doi.org/10.30738/jtv.v6i1.2816

Sugiyono, S. (2016). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Alfabeta.

Takakusagi, A. (2021). Theoretical study evaluating renewal of an air-conditioning system. Journal of Building Engineering, 44, 102876. https://doi.org/10.1016/j.jobe.2021.102876

Ulum, A. Z., & Suharno, S. (2019). Infiltrasi budaya global terhadap budaya lokal pesta Baratan dalam mempengaruhi pembentukan budaya kewargaan. Harmoni Sosial: Jurnal Pendidikan IPS, 6(2), 137–144. https://doi.org/10.21831/hsjpi.v6i2.10023

Widodo, S., & Hasan, S. (2008). Sistem refrigerasi dan tata udara. Direktorat Pembinaan Sekolah Menegah Kejuruan Republik Indonesia.

Wirawan, M. A., & Widjanarko, D. (2020). Pembuatan alat peraga AC Split 1 PK sebagai media pembelajaran mata kuliah sistem pendingin di Universitas Negeri Semarang. Journal of Mechanical Engineering, 9(1), 58–63. https://journal.unnes.ac.id/sju/index.php/jmel/article/view/34034




DOI: https://doi.org/10.21831/jpv.v11i3.43244

Refbacks





Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Our journal indexed by:
       

ISSN 2088-2866 (print) || ISSN 2476-9401 (online)

View Journal Visitor Stats