OPTIMIZATION OF CONDITION ION Cu2+ ELECTRODEPOSITION IN ELECTROPLATING LIQUID WASTE WITH FORMALDEHYDE AS REDUCING AGENT

Siti Marwati, Jurusan Pendidikan Kimia, Fakultas MIPA, Universitas Negeri Yogyakarta, Indonesia
Regina Tutik Padmaningrum, Jurusan Pendidikan Kimia, Fakultas MIPA, Universitas Negeri Yogyakarta, Indonesia

Abstract


Abstract

 

The aims of this research to determine of the optimum of formaldehyde concentration, teh optimum of electrodeposition time and the optimum pH of solution. In addition, this research also   aims to determine the character Cu deposite at optimum operational. The sample in this research was used   real electroplating liquid waste from Kotagede Yogyakarta.done at various formaldehyde concentration Electrodeposition was done at various formaldehyde concentration, electrodeposition time and varoius of pH. The optimum conditions could be seen  the  maximum efficiency. It could be obtained by measuring the final concentration of Cu2+ after electrodeposition process by  Atomic absorption spectrophotometry. The character of deposit could be seen by  visual and X-ray Diffraction. The result  of this research showed that the optimum of formaldehyde concentration as reducing  agent was 0.3 M. the optimum time was 4 hours and the optimum of  pH 9. The character of deposte was contained  Cu deposite and more subtle than deposite which electrodeposited without formaldehyde.

 

Keywords: electrodeposition, formaldehyde, reducing agent


Keywords


electrodeposition, formaldehyde, reducing agent

Full Text:

PDF

References


K. Lulu (2000) Laporan Penelitian, SMK NU Pacitan, Indonesia.

T. Anik, E. M. Touhami, K. Himm, S. Schireen, R. A. Belkhmima, M. Abouchane, M. Cisse, (2012) Int. Journal. Electrochem. Sci, 7 2009-2018

Purwanto, H. Syamsul (2004) Teknologi Industri Elektroplating, Badan Penerbit UNDIP, Semarang, p. 6-9, 71

N. Kanani (2009) Electroplating Basic Principles, Process and Practice, Oxforf: Elsevier Advance Technology, p.136

K. Yogi (2013) Skripsi, Jurusan Pendidikan Kimia FMIPA UNY, Indonesia

H. Cesiulis, O. Berserova, A. Valiuniene, I. Prosycevas, G. Baltrunas (2004) Material Science (Medziagotyra), 10(2):142-146

M. Siti, T. P, Regina, Marfuatun (2007) Jurusan Pendidikan Kimia FMIPA UNY, Laporan Penelitian

J. L. Cardoso, G. Sbastio, S. Filho (2011) Quim. Nova, 34(4):641-645

D. C. Blackley (2001) Polimer Latices: Science and Technology, Volume 3, London : Maclaren, p. 178

C. Whiston (1987) X-Ray Methods Analytical Chemistry by Open Learning, London: John Willey and Sons Inc, p.82

A. Goel (2006) Crystallography. New Delhi: Discovery Publishing House, p. 80.




DOI: https://doi.org/10.21831/jsd.v5i1.12670

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Jurnal Sains Dasar


Printed ISSN (p-ISSN): 2085-9872
Online ISSN (e-ISSN): 2443-1273

Indexer:
     

Creative Commons License
 
Jurnal Sains Dasar  is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
 
Free counters!
 
View My Stats