Prototype of Voltage, Current, Temperature, and Oil Level Monitoring System in Transformers
DOI:
https://doi.org/10.21831/jraee.v2i2.612Keywords:
Transformer, Monitoring, PrototypeAbstract
A distribution transformer is the most crucial component of the electric power distribution system. The output values of parameters such as voltage, current, temperature, and oil level vary, necessitating monitoring. This final project aims to design and build, determine the functional testing of the device, and assess the performance accuracy of its components. The system design results show that the components used in the prototype system are the INA219, AHT10, and HC-SR04 sensors. The measurement results from the sensors are displayed on an Android application and stored in a logger. Functional test results indicate that all components used in the prototype monitoring system function normally, and the measurement errors are within the datasheet limits of each component. The percentage error values from the accuracy testing of the sensors show values below 5%, with the largest error being 3.2% in current measurement and the smallest error being 0.0% in distance measurement. Therefore, the sensors are in good condition, and these values are below the IEC 13B-23 standard limits.
Downloads
References
Q. T. Tran et al., “A review of health assessment techniques for distribution transformers in smart distribution grids,” Nov. 02, 2020, MDPI AG. doi: 10.3390/app10228115.
M. I. Wiranto, L. S. Patras, and S. Silimang, “Analisa Kinerja Transformator Distribusi Kawanua Emerald City-Amethyst,” Teknik Elektro, vol. 2, no. 1, pp. 1–11, Sep. 2021.
Sarathkumar, U. M, K. Kumar, and K. A, “Real Time Transformer Health Monitoring System Using IOT,” International Journal of Advanced Research in Electrical, vol. 8, no. 3, pp. 783–790, 2019, doi: 10.15662/IJAREEIE.2019.0803083.
Q. T. Tu Tran, K. Davies, L. Roose, B. V. Doan, and N. Q. Nguyen, “Online distribution service transformer health assessment using real-time grid energy monitor,” in 2020 IEEE Kansas Power and Energy Conference, KPEC 2020, Institute of Electrical and Electronics Engineers Inc., Jul. 2020. doi: 10.1109/KPEC47870.2020.9167580.
M. B. Nurfaif, S. R. Sulistiyanti, M. Komarudin, and G. F. Nama, “Telemetry and tele-control of electronic appliances for smart-home-system,” in 2017 International Symposium on Electronics and Smart Devices, ISESD 2017, Institute of Electrical and Electronics Engineers Inc., Jul. 2017, pp. 18–23. doi: 10.1109/ISESD.2017.8253298.
Tianur, M. Lestari, and E. Widodo, “IoT TROHEMS (Transformator Online Health Monitoring System),” Pekanbaru, Nov. 2023. [Online]. Available: https://jurnal.pcr.ac.id/index.php/elementer
I. M. A. Nugraha and I. G. M. N. Desnanjaya, “PENEMPATAN DAN PEMILIHAN KAPASITAS
TRANSFORMATOR DISTRIBUSI SECARA OPTIMAL PADA PENYULANG PERUMNAS,” Jurnal
Resistor, vol. 4, no. 1, pp. 33–44, 2021, [Online]. Available: https://s.id/jurnalresistor
P. Hariyanto, Sepdian, M. Idris, and M. Isnen, “Perancangan Alat Proteksi Tegangan Listrik Berlebih dan Menurun pada Jaringan Distribusi Tegangan Rendah,” Jurnal Elektronika Listrik dan Teknologi Informasi Terapan, vol. 2, no. 2, pp. 46–52, Dec. 2020, [Online]. Available:
https://ojs.politeknikjambi.ac.id/elti
A. B. Sulaksono and A. I. Agung, “PROTOTYPE SISTEM MONITORING ARUS, TEGANGAN, DAN SUHU PADA TRANSFORMATOR TIGA FASA BERBASIS ARDUINO MENGGUNAKAN MODUL 3DR,” Jurnal Teknik Elektro, vol. 9, no. 2, pp. 467–475, 2020.
B. Winardi, “PERANCANGAN MONITORING SUHU TRANSFORMATOR TENAGA 150 / 20 KV BERBASIS ARDUINO MEGA 2560,” Jurnal TRANSMISI, vol. 19, no. 3, pp. 120–124, 2017.
Mardiansah and Wildian, “Rancang Bangun Alat Monitoring Detak Jantung Pasien Rumah Sakit dengan Sistem Telemetri Berbasis Ardiuno UNO R3,” Jurnal Fisika Unand, vol. 8, no. 4, pp. 355–361, 2019.
H. Wijaya and W. A. Kusuma, “Implementasi Sistem Multi-Telemetri Menggunakan Protokol RF24 Untuk Monitoring Pada Greenhouse Implementation of Multi-Telemetry System using RF24 Protocol for Greenhouse Monitoring,” Jurnal teknologi Informasi, vol. 17, no. 4, pp. 365–376, 2018.
D. Michael and D. Gustina, “RANCANG BANGUN PROTOTYPE MONITORING KAPASITAS AIR PADA KOLAM IKAN SECARA OTOMATIS DENGAN MENGGUNAKAN MIKROKONTROLLER ARDUINO,” Jurnal IKRA-ITH Informatika, vol. 3, no. 2, pp. 59–66, 2019.
A. A. Masriwilaga, T. A. Jabar, A. Subagja, and S. Septiana, “Monitoring System for Broiler Chicken Farms Based on Internet of Things (IoT),” Telekontran : Jurnal Ilmiah Telekomunikasi, Kendali dan Elektronika Terapan, vol. 7, no. 1, pp. 1–13, Apr. 2019, doi: 10.34010/telekontran.v7i1.1641.
M.M.Hidayat,A.D.Santoso,andM.Rahmawati,“RancangBangunSistemMonitoringCuacaBerbasis Google Spreadsheet,” Jurnal Teknik Mesin Industri dan Elektro (JTMEI), vol. 3, no. 2, pp. 11–27, Jun. 2024, doi: 10.55606/jtmei.v3i2.3748.
