Email this article 
Development of Practice Learning Media Based on Programmable Logic Controller
Yaya Jakaria, Directorate of Vocational High Schools, Directorate General of Vocational Education, Ministry of Education and Culture, Indonesia
Abstract
The objectives of the study were (1) to produce PLC-based Electrical Machine Practice learning media (2) to determine the performance of PLC-based Electrical Machine Practice learning media products and (3) to determine the feasibility level of PLC-based Electrical Machine Practice learning media products. This study was Research and Development which refers to the ADDIE model according to Branch. The stages in this study include analysis, design, development, implementation, and evaluation. Data collection methods used in this study were interviews, observations, and questionnaires. The instruments used in the study were the observation sheet and questionnaires. The results of this study indicated: (1) the product of learning media for Electrical Machine Practice based on PLC Schneider SR2B201FU; (2) the product of PLC-based Electrical Machine Practice learning media has good performance; (3) the product of PLC-based Electrical Machine Practice learning media has eligibility in the very feasible category to be used in learning, which is supported by the acquisition of a consecutive score of 3.65; 3.58 and 3.58 on a 4.0 scale according to the validation of material experts, media experts, and students.
Keywords
Full Text:
PDFReferences
E. Lukito, F. Arifin, and P. Walipranoto, “Development of Learning Media (Programmable Logic Controller) as a Case Study of Sorting Machine Applications on Electronics Engineering Education Study Program Faculty of Engineering Universitas Negeri Yogyakarta,” Adv. Soc. Sci. Educ. Humanit. Res., vol. 440, 2019.
Soeharto, Sukir, and A. S. J. Wardhana, “Performance of A Programmable Logic Controller Based Electrical Machine Trainer Kit,” J. Phys. Conf. Ser., no. 1413 012011, 2019.
J. M. Sumilat, F. R. Seke, and J. Mantiri, “Simulation Method in Programmable Logic Controller,” J. Educ. Method Technol., vol. 1, no. 2, pp. 67–76, 2018.
A. Septian MN, “Penerapan Trainer Human Machine Interface (HMI) Berbasis CX-Designer Sebagai Media Pembelajaran Programmable Logic Controller (PLC),” J. Inform. Univ. Pamulang, vol. 3, no. 4, 2018.
A. M. Mappalotteng, H. Nur, and F. Kanan, “The Development of Programmable Logic Controller Tutorial in the Form of Industrial-Based Learning Materials in Vocational High Schools,” Res. Inven. Int. J. Emgineering Sci., vol. 5, no. 5, pp. 49–58, 2015.
F. Pinnekamp, “Product Automation,” in Springer Handbook of Automation, Berlin, Heidelberg: Springer, 2009, pp. 545–558.
M. Ioannides, “Design and Implementation of PLC-based Monitoring Control System for Induction Motor,” IEEE Trans. Energy Convers., vol. 15, no. 1, pp. 7–14, 2004.
H. Zamtinah, “Peningkatan Hasil Belajar Mata Kuliah Instalasi Listrik Melalui Pendekatan Learning Cycle Five ‘E’ (LC 5 E),” J. Pendidik. Teknol. dan Kejuru., vol. 22, no. 2, 2014.
Tiwan, “Penerapan Modul Pembelajaran Bahan Teknik sebagai Upaya Peningkatan Proses Pembelajaran di Jurusan Pendidikan Teknik Mesin FT UNY,” J. Pendidik. Teknol. dan Kejuru., vol. 19, no. 2, 2010.
B. G. Purnomo and T. Sukardi, “Integration of Project-Based Entrepreneurship and Productive Practical Learning in Vocational High Schools,” J. Pendidik. Teknol. dan Kejuru., vol. 25, no. 1, 2019.
R. M. Branchs, Multimedia Based Instructional Design. USA: John Wiley & Sonc, Inc, 2004.
R. M. Branch, Instructional Design: The ADDIE Approach. Boston, MA: Springer US, 2009.
T. P. Budi, SPSS 13.0 Terapan: Riset Statistik Parametrik. Yogyakarta: Andi Offset, 2006.
S. Arikunto, Prosedur Penelitian: Suatu Pendekatan Praktik. Jakarta: Rineka Cipta, 2013.
S. Thiagarajan, Instructional Development for Training Teachers of Exceptional Children. Washington DC: National Center for Improvement Educational System, 1974.
Sugiyono, Metode Penelitian dan Pengembangan Research and Development. Bandung: Alfabeta, 2016.
Sugiyono, Statistika Untuk Penelitian. Bandung: Alfabeta, 2006.
F. N. D. Fatimah, Teknik Analisis SWOT. Jakarta: Quadrant, 2016.
DOI: https://doi.org/10.21831/jptk.v26i2.33893
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Jurnal Pendidikan Teknologi dan Kejuruan
This work is licensed under a Creative Commons Attribution 4.0 International License.
Online (e-ISSN): 2477-2410 || Printed (p-ISSN): 0854-4735
Jurnal Pendidikan Teknologi Kejuruan by http://journal.uny.ac.id/index.php/jptk was distributed under a Creative Commons Attribution 4.0 International License.
View My StatsSupported by:
Social Media:
