Evaluasi pelaksanaan praktik kerja industri peserta didik program keahlian teknik otomotif SMK Giripuro Sumpiuh

Umar Nur Arif, SMK Giripuro Sumpiuh
Wardan Suyanto, Universitas Negeri Yogyakarta

Abstract


Penelitian ini bertujuan untuk mengetahui pelaksanaan Praktik Kerja Industri peserta didik Program keahlian Teknik Otomotif di SMK Giripuro Sumpiuh. Teknik pengumpulan data menggunakan angket, dokumentasi dan observasi. Data penelitian dikumpulkan melalui kuesioner yang kemudian dianalisis secara diskriptif kuantitatif. Hasil penelitian menunjukkan: (1) Konteks peserta didik menyatakan memahami sebanyak 96 siswa (80%), guru pembimbing sekolah menyatakan memahami sebanyak 5 guru (50%) dan pembimbing industri menyatakan memahami sebanyak 10 pembimbing (83,4%). (2) Input persta didik menyatakan cukup siap sebanyak 58 siswa (48,3%), guru pembimbing sekolah menyatakan siap sebanyak 6 guru (60%) dan pembimbing industri menyatakan siap sebanyak 9 pembimbing (75%). (3) Proses peserta didik menyatakan rajin sebanyak 82 siswa (68,3%), guru pembimbing sekolah menyatakan rajin dan kurang rajin berimbang sebanyak 5 guru pembimbing (50%) dan pembimbing industri menyatakan rajin sebayak 11 pembimbing (91,7%). (4) Produk peserta didik menyatakan baik sebanyak 87 siswa (72,5%).

 

EVALUATION OF WORK PRACTICE OF AUTOMOTIVE ENGINEERING PROGRAM VOCATIONAL HIGH SCHOOL GIRIPURO SUMPIUH

Abstract

This study aims to determine the implementation of the Industrial Employment Practices of Automotive Engineering Program learner in Vocational school Giripuro Sumpiuh. Techniques of data collection using questionnaires, documentation and observation. Data were collected through a questionnaire which was then analyzed by descriptive quantitative. The results of the study as follows: (1) learner context showed students understand as many as 96 (80%), school counselor show understanding by 5 teachers (50%) and industry mentors demonstrate understanding by 10 counselors (83.4%). (2) Students input showed quite ready by 58 students (48.3%), school counselor stated ready by 6 teachers (60%) and industry mentors show ready by 9 tutors (75%). (3) The process stated diligent learners showed as many as 82 students (68.3%), school counselor showed less diligent and impartial guidance counselor as much as 5 (50%) and industry mentors demonstrate diligent supervisor as many as 11 (91.7%). (4) The product showed good learners as many as 87 students (72.5%)


Full Text:

PDF | 262-270

References


Buntarto. (2006). Efektifitas pelaksanaan praktik kerja industri program keahlian teknik mekanik otomotif SMK di Bantul. Yogyakarta: UNY.

Carslon, & Sulvian, J. F. (1999). Hands-on engineering: Learning by doing integrated teaching and learning program. Colorado: University of Colorado Boulder.

Depdikbud. (1997). Organisasi pelaksanaan sistem ganda. Jakarta: Direktorat Pendidikan Menengah Kejuruan.

Departemen Pendidikan Nasional. (2006). Panduan kurikulum tingkat satuan pendidikan. Jakarta: Direktorat Pendidikan Menengah Kejuruan.

Donaldson, L., & Scanell, E. E. (1993). Pengembangan sumber daya manusia: Panduan bagi pelatih pemula. Jakarta: Gaya Media Pratama.

Fernanders, H. J. X. (1984). Evaluation of Educational Program. Jakarta: National Education Planning, Eval & Curriculum.

Nolker, H. (1983). Pendidikan kejuruan. Jakarta: Gramedia.

Majelis Pendidikan Kejuruan Nasional. (1996). Konsep Pendidikan Sistem Ganda. Jakarta.

Pasavec, E. J., & Carry, R. G. (1985). Program evaluation, methods, and case studies. Englewood Cliff: Prentice Hall. Inc.

Rainer. (1992). Vocational training in the dual system. Hamburg: Hamburg Institute.

Stufflebeam, D. L., & Shinkield, A. J. (1985). Systematic Evaluation. Massachusetts: Kulner Academic Publishers Group Distribution Centre.

Sudjana. (1992). Metode statistika. Bandung: Tarsito.

Sugiyono. (2002). Metode penelitian administrasi. Bandung: Alfabeta.

Djojonegoro, W. (1999). Pengembangan sumber daya manusia. Jakarta: Balai Pustaka Pesero.

Worthen, B. R., & Sander, J. R. (1973). Education evaluation, theory, and practice. Washington: Charles a Jones Publishing Company.




DOI: https://doi.org/10.21831/jpv.v4i2.2551

Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Our journal indexed by:
       

ISSN 2088-2866 (print) || ISSN 2476-9401 (online)

View Journal Visitor Stats