Proses perolehan kompetensi TIK melalui program praktik industri siswa SMKN 2 Pengasih Kulon Progo

Nuur Wachid Abdul Majid; Putu Sudira

doi:10.21831/jpv.v7i1.12712

Proses perolehan kompetensi TIK melalui program praktik industri siswa SMKN 2 Pengasih Kulon Progo

Nuur Wachid Abdul Majid, Universitas Negeri Yogyakarta, Indonesia
Putu Sudira, Universitas Negeri Yogyakarta, Indonesia

10.21831/jpv.v7i1.12712

Abstract

Penelitian ini bertujuan untuk menemukan: (1) proses perolehan kompetensi melalui program PI di DUDI; dan (2) hasil perolehan kompetensi siswa setelah mengikuti program PI di DUDI. Penelitian ini menggunakan pendekatan kualitatif jenis studi kasus. Setting penelitian ini adalah di PT. JMI sebagai industri pasangan SMKN 2 Pengasih. Informan pada penelitian ini adalah pimpinan atau pemilik PT JMI, pembimbing industri, pembimbing siswa dari sekolah, dan siswa peserta PI. Pengumpulan data melalui observasi, wawancara mendalam dan studi dokumentasi. Teknik analisis data mengacu pada analisis model interaktif Miles & Huberman, meliputi pengumpulan data, data condensation, penyajian data, verifikasi, dan penarikan kesimpulan. Hasil penelitian ini menunjukkan bahwa proses perolehan kompetensi TIK dalam program PI melalui: (1) proses untuk memperoleh kompetensi di tempat industri, meliputi: (a) melalui pengamatan dan mendengarkan, (b) belajar sambil menyelesaikan tugas (learning by doing) dan mengikuti aktivitas kerja, (c) belajar melalui pengalaman, (d) belajar memecahkan masalah, (e) belajar melalui kondisi lingkungan kerja, (f) belajar mandiri, dan (g) belajar secara terus menerus dan diulang-ulang; dan (2) hasil yang didapat siswa setelah mengikuti program PI adalah mampu menunjukkan perkembangan kognitif, afektif, dan psikomotorik yang dapat dideskripsikan antara lain: pengetahuan terkait dunia kerja, keterampilan kerja, kemampuan menyelesaikan pekerjaan, dan sikap yang berkaitan dengan DUDI.

Kata kunci: proses perolehan kompetensi, hasil perolehan kompetensi, Program PI, TIK

THE ACQUISITION PROCESS OF ICT COMPETENCE THROUGH INDUSTRIAL PRACTICE PROGRAM OF THE STUDENTS OF SMKN 2 PENGASIH KULON PROGO

Abstract

This research aims to investigate: (1) the acquisition process competency through industrial practice program in DUDI; and (2) students’ acquisition outcomes in the industrial practice program. The research used the qualitative case study approach. This research took place at PT JMI as a partner of SMKN 2 Pengasih. The informants in this research were the owner PT. JMI, the industrial mentors, the school mentor, and students who participated in the industrial practice program. The data were collected through observations, in-depth interviews, and documentation. The technical analysis of the data refered to the analysis of Miles & Huberman interactive model, including data collection, data condensation, data display, and drawing and verifying conclusions. The result shows that the process of acquisition of ICT competencies in the PI program is through: (1) process of acquiring competencies in the industry, including: (1) learning through observing and listening, (b) learning while completing the task (learning by doing) and work activities; (c) learning through experiences, (d) learning to solve problems, (e) learning through work environment, (f) self-directed learning, and (g) continuous and repeated learning; and (2) students’ learning outcomes in the industrial practice program are able to demonstrate cognitive, affective, and psychomotor developments, including knowledge of the world of work, job skills, ability to finish the job, and attitudes related to DUDI.

Keywords: the acquisition process of competencies, the acquisition outcome of competencies, PI program, ICT

Full Text:

PDF

References

BBPP Batangkaluku. (2013). Analisa kepuasan peserta terhadap pelayanan penyelenggaraan pelatihan. Retrieved March 20, 2015, from http://bbpp-batangkaluku.com/bbpp/index.php/all- category/90-kajiwidya/197-kw10

Billett, S. (2000). Guided learning at work. Journal of Workplace Learning, 12(7), 272–285. https://doi.org/10.1108/13665620010353 351

Bukit, M. (2002). Beberapa masalah dalam implementasi pendidikan sistem ganda di SMK. In D. Supriadi (Ed.), Sejarah pendidikan teknik dan kejuruan di Indonesia, membangun manusia produktif, Dirdikmenjur Depdiknas (pp. 527–542). Bandung: Rosdakarya.

Catts, R., Falk, I., & Wallace, R. (2011). Introduction: Innovations in theory and practice. In R. Catts, I. Falk, & R. Wallace (Eds.), Vocational learning innovative theory and practice (pp. 1–8). New York: Springer.

Choy, S. C. (2010). Students’ conceptual knowledge about workplace pedagogies and applications to learning in the workplace. In Proceedings of Australian Vocational Education and Training Research Association (AVETRA). April 8-9, 2010, Gold Coast.

Djojonegoro, W. (1998). Pengembangan sumberdaya manusia melalui sekolah menengah kejuruan (SMK). Jakarta: PT Balai Pustaka.

Emzir. (2010). Metode penelitian kualitatif: analisis data. Jakarta: Rajawali Pers.

Fry, H., Ketteridge, S., & Marshall, S. (2009). A handbook for teaching and learning in higher education: Enhancing academic practice (3rd ed.). London: Routledge.

Gangani, N., McLean, G. N., & Braden, R. A. (2006). A Competency-Based Human Resource Development Strategy. Performance Improvement Quarterly, 19(1), 127–139. https://doi.org/10.1111/j.1937- 8327.2006.tb00361.x

Hardum, S. E. (2015, March 6). Kemnaker targetkan kirim 2.000 peserta magang ke Jepang. Beita Satu. Retrieved from http://www.beritasatu.com/nusantara/254 393-kemnaker-targetkan-kirim-2000- peserta-magang-ke-jepang.html

Jonassen, D. H. (2011). Learning to solve problems: A handbook for designing. batangkaluku.com/bbpp/index.php/all- category/90-kajiwidya/197-kw10

Billett, S. (2000). Guided learning at work. Journal of Workplace Learning, 12(7), 272–285. https://doi.org/10.1108/13665620010353 351

Djojonegoro, W. (1998). Pengembangan sumberdaya manusia melalui sekolah menengah kejuruan (SMK). Jakarta: PT Balai Pustaka.

Emzir. (2010). Metode penelitian kualitatif: analisis data. Jakarta: Rajawali Pers.

Fry, H., Ketteridge, S., & Marshall, S. (2009). A handbook for teaching and learning in higher education: Enhancing academic practice (3rd ed.). London: Routledge.

Hardum, S. E. (2015, March 6). Kemnaker targetkan kirim 2.000 peserta magang ke Jepang. Beita Satu. Retrieved from http://www.beritasatu.com/nusantara/254393-kemnaker-targetkan-kirim-2000- peserta-magang-ke-jepang.html

Jonassen, D. H. (2011). Learning to solve problems: A handbook for designing problem-solving learning environments. New York: Routledge.

Jones, E., Voorhees, R., & Paulson, K. (2002). Defining and assessing learning: Exploring competency-based initiatives. Washington, DC: Council of the National Postsecondary Education Cooperative. Publication NCES 2002159. Diambil pada tanggal 19 April 2015 dari http://nces.ed.gov/pubs2002/2002159.pdf

Majid, N. W. A. (2015). Pola pembimbingan di tempat kerja: studi kasus pelaksanaan program praktik industri di PT JMI. Jurnal Taman Vokasi, 3(2), 761–768.

Mercer, J., & Clayton, D. (2012). Psikologi sosial. (Terjemahan Noermalasari Fajar Widuri). New York: Pearson Education Ltd.

Merriam, S. B. (2001). New directions for adult and continuing education. San Francisco: John Wiley & Sons, Inc.

Miles, M. B., Huberman, A. M., & Saldana, J. (2014). Qualitative data analysis: a methods sourcebook. New York: SAGE Publications, Inc.

Miswardi, Y., & Pardjono, P. (2013). Proses dan hasil belajar pada prakerind bidang keahlian kendaraan ringan: studi kasus pada industri pasangan smkn 3 yogyakarta. Jurnal Pendidikan Vokasi, 3(2). Retrieved from http://journal.uny.ac.id/index.php/jpv/arti cle/view/1606/1339

Muliati. (2008). Evaluasi pendidikan sistem ganda (Suatu penelitian evaluatif berdasarkan Stake’s countenance model mengenai program pendidikan sistem ganda pada sebuah SMK di Sulawesi Selatan (2005/2007). Ringkasan Disertasi, Universitas Negeri Jakarta.

Pardjono. (2011). Peran industri dalam pengembangan SMK. In Workshop peran industri dalam pengembangan SMK di SMKN 2 Kasihan Bantul.

Shariff, S. M., & Muhamad, M. (2010). Learning in an industrial practicum training program: a case study in a public university in malaysia. World Applied Sciences Journal, 11(11), 1361–1368. Retrieved from https://www.idosi.org/wasj/wasj11(11)/8. pdf

Singh, M. (2009). Social and cultural aspects of informal sector learning: meeting the goals of EFA. In R. Maclean, D. Wilson, & C. Chinien (Eds.), International handbook of education for the changing world of work, bridging academic and vocational learning (pp. 349–358). Bonn: Springer.

Stern, B. (2003). Career and workforce development trends: implication for Michigan higher education white paper. Michigan: Ferris State University.

Sugestiyadi, B. (2012). Model magang siswa sekolah menengah kejuruan (SMK) bidang teknik furniture di Jawa Tengah. Disertasi, tidak dipublikasikan. Universitas Negeri Yogyakarta.

Suwarman, & Pardjono. (2014). Pengelolaan praktik kerja industri pada program keahlian teknik pemesinan smk se- kabupaten kulon progo. Jurnal Pendidikan Vokasi, 4(1), 83–95. Retrieved from http://journal.uny.ac.id/index.php/jpv/arti cle/view/2537/2095

Turuk, M. C. (2008). The relevance and implications of vygotsky’s sociocultural theory in the second language classroom. The Annual Review of Education, Communication, and Language Sciences Is an Electronic (ARECLS) Journal, 5(1), 244–262. Retrieved from http://research.ncl.ac.uk/ARECLS/vol5_ documents/Articles/turuk_vol5.pdf

Vaughan, K., O’Neil, P., & Cameron, M. (2011). Successful workplace learning: how learning happens at work. Industry Training Federation: Industry Training Federation. Retrieved from http://www.nzcer.org.nz/research/publica tions/successful-workplace-learning-how-learning-happens-work

Wallace, R. (2011). Social partnerships in learning: connecting to the learner identities of disenfranchised regional learners. In R. Catts, I. Falk, & R. Wallace (Eds.), Vocational Learning Innovative Theory and Practice (pp. 9– 31). New York: Springer.

DOI: https://doi.org/10.21831/jpv.v7i1.12712