VIRTUAL DISTRIBUTING STATION SEBAGAI SARANA MEDIA PEMROGRAMAN PLC

Rohjai Badarudin

doi:10.21831/jee.v6i2.54152

VIRTUAL DISTRIBUTING STATION SEBAGAI SARANA MEDIA PEMROGRAMAN PLC

Rohjai Badarudin, (Scopus ID: 57222636525) Department of Electrical Engineering Education, Faculty of Engineering, Universitas Negeri Yogyakarta, Indonesia

10.21831/jee.v6i2.54152

Abstract

ABSTRACT
This study aims to develop learning media Virtual Distributing Station for PLC programming. The development model adopts the water-fall procedure from Presman. The waterfall procedure includes 1) communication, 2) planning, 3) modeling, 4) construction, and 5) system delivery. Product validation is carried out by material experts, media experts, and early adopters. The research instrument used a questionnaire with a 4-point Likert scale. The results showed that the performance of the virtual distributing station was included in the Very Eligible category, the feasibility of the virtual distributing station was included in the Very Appropriate category according to material experts, media experts, and early user responses. Thus, the virtual distributing station is very feasible to be used as a PLC programming medium because (1) it has met the eligibility test criteria, (2) it is flexible, it can be installed on a large number of computers, (3) it can be operated based on PLC programming, (4) more economical, limited to PLC programming to operate distributing station.

ABSTRAK
Penelitian ini bertujuan untuk mengembangkan media pembelajaran Virtual Distributing Station untuk pemrograman PLC. Model pengembangan mengadopsi dari prosedur water-fall dari Presman. Prosedur water-fall meliputi 1) komunikasi, 2) perencanaan, 3) pemodelan, 4) konstruksi, dan 5) penyerahan sistem. Validasi produk dilakukan oleh ahli materi, ahli media, dan pengguna awal. Instrumen penelitian menggunakan angket dengan skala likert 4 poin. Hasil penelitian diketahui bahwa unjuk kerja virtual distributing station termasuk dalam kategori Sangat Layak, kelayakan virtual distributing station termasuk dalam kategori Sangat Layak menurut ahli materi, ahli media, dan respon pengguna awal. Dengan demikian virtual distributing station Sangat Layak untuk digunakan sebagai sarana media pemrograman PLC karena (1) telah memenuhi kriteria uji kelayakan, (2) fleksibel, bisa dipasang pada komputer dalam jumlah banyak, (3) dapat dioperasikan berbasis pemrograman PLC, (4) lebih ekonomis, sebatas pada pemrograman PLC untuk mengoperasikan distributing station.

Keywords

virtual, distributing station, plc, media pembelajaran

Full Text:

PDF

References

Badarudin, R., & Hariyanto, D. (2021). Visual validation of PLC program using virtual simulator. Journal of Physics: Conference Series, 1833(1), 012063.

Bolton, W. (2009). Programmable Logic Controllers (Fifth). Newnes.

Hadi, H. H., & Sallom, M. Y. (2019). pneumatic control system of automatic production line using SCADA implement PLC. 2019 4th Scientific International Conference Najaf (SICN), 37–42.

Kocian, J., Koziorek, J., & Pokorny, M. (2011). Implementation of fuzzy logic control based on plc. ETFA2011, 1–8.

Patrik, Š., & Tomáš, Z. (2019). Modernization of the transport system control of the production system. Технічні Науки Та Технології, 4 (18), 141–147.

Pressman, R. S. (2012). Rekayasa Perangkat Lunak: Pendekatan Praktisi Edisi 7. Andi.

Sahputro, S. D., Fadilah, F., Wicaksono, N. A., & Yusivar, F. (2017). Design and implementation of adaptive PID controller for speed control of DC motor. 2017 15th International Conference on Quality in Research (QiR): International Symposium on Electrical and Computer Engineering, 179–183.

Skýpala, R., & Ružarovský, R. (2021). Virtual commissioning of automated manufacturing systems—Quality-handling station case study. MATEC Web of Conferences, 343.

DOI: https://doi.org/10.21831/jee.v6i2.54152