RANCANG BANGUN KENDALI SUHU PEMANAS TANGKI BERPENGADUK KONTINYU MENGGUNAKAN PENGENDALI PID BERBASIS NI ELVIS II DAN LABVIEW

Imam Febiawan; Noval Lilansa; Abyanuddin Salam

doi:10.21831/jee.v4i2.35110

RANCANG BANGUN KENDALI SUHU PEMANAS TANGKI BERPENGADUK KONTINYU MENGGUNAKAN PENGENDALI PID BERBASIS NI ELVIS II DAN LABVIEW

Imam Febiawan, Politeknik Manufaktur Bandung, Indonesia
Noval Lilansa, Politeknik Manufaktur Bandung, Indonesia
Abyanuddin Salam, Politeknik Manufaktur Bandung, Indonesia

10.21831/jee.v4i2.35110

Abstract

ABSTRACT:

This paper proposes a temperature control system on a continuous stirred tank heater prototype using a PID controller. Input value parameters and system responses are displayed on a GUI (Graphical User Interface) connected to a computer (PC or Laptop) so that they can be monitored in real-time. The sensor used in the stirred tank heater consists of two LM35DZ temperature sensors. The results of the temperature sensor readings are entered into the data acquisition device (NI ELVIS II) as a data processing process which is then processed using LabVIEW and displayed on the GUI. The results of this study can provide a model of a continuous stirred tank heater temperature control system with a water room temperature range up to 45ºC using the parameters PI Kp = 83.2 Ti = 0.03, Td = 0.

ABSTRAK:

Paper ini mengusulkan sebuah sistem kendali suhu pada sebuah prototipe pemanas tangki berpengaduk kontinyu menggunakan pengendali PID. Parameter nilai masukan dan respon sistem ditampilkan pada GUI (graphical user interface) yang terhubung dengan komputer (PC atau Laptop) sehingga dapat dipantau secara waktu riil. Sensor yang digunakan pada alat pemanas tangki berpengaduk terdiri dari dua buah sensor suhu LM35DZ. Hasil pembacaan sensor suhu tersebut dimasukkan pada perangkat akusisi data (NI ELVIS II) sebagai proses pengolahan data yang selanjutnya diolah menggunakan LabVIEW dan ditampilkan pada GUI. Hasil penelitian ini mampu memberikan sebuah model sistem kendali suhu pemanas tangki berpengaduk kontinyu dengan rentang suhu ruangan air sampai 45ºC menggunakan parameter PID Kp=83,2 Ti=0,03, Td=0.

Keywords

continuous stirred tank, heater, PID controller, NI ELVIS II, LabVIEW, Graphical User Interface

Full Text:

PDF

References

Jayachitra, A., & Vinodha, R. (2014). Genetic Algorithm Based PID Controller Tuning Approach for Continuous Stirred Tank Reactor. Advances in Artificial Intelligence, 2014, 1–8. https://doi.org/10.1155/2014/791230

Jibril, M., Tadese, M., & Tadese, E. A. (2020). Temperature Control of Stirred Tank Heater using Optimal Control Technique. June, 9. https://doi.org/10.20944/preprints202006.0285.v1

Kabila, V., & Glan Devadhas, G. (2015). Comparative Analysis of PID and Fuzzy PID Controller Performance for Continuous Stirred Tank Heater. Indian Journal of Science and Technology, 8(23). https://doi.org/10.17485/ijst/2015/v8i23/85351

Ogata, K. (2010). Modern Control Engineering. In M. J. Horton (Ed.), Indian Pediatrics (Fifth, Vol. 39, Issue 12). Pretince Hall.

Rajagopalen, A. S. (2013). Identification of an Effective Controller for a Stirred Tank Heater Process. International Journal of Engineering and Advanced Technology, 3(1), 271–279.

Septiani, N. I., Bayusari, I., Caroline, C., Haiyunnisa, T., & Suprapto, B. Y. (2017). Optimization of PID control parameters with genetic algorithm plus fuzzy logic in stirred tank heater temperature control process. ICECOS 2017 - Proceeding of 2017 International Conference on Electrical Engineering and Computer Science: Sustaining the Cultural Heritage Toward the Smart Environment for Better Future, August, 61–66. https://doi.org/10.1109/ICECOS.2017.8167167

Yudho Suprapto, B., Bayusari, I., Caroline, & Muhammad. (2018). Comparison of Cascade and Feedforward-Feedback Controllers for Temperature Control on Stirred Tank Heater Systems. Proceedings - 2018 International Seminar on Application for Technology of Information and Communication: Creative Technology for Human Life, ISemantic 2018, September 2018, 166–170. https://doi.org/10.1109/ISEMANTIC.2018.8549782

DOI: https://doi.org/10.21831/jee.v4i2.35110