ALAT PELAPIS LOGAM ELECTROPATING HASIL PENELITIAN UNTUK PRAKTIK SISWA SMK

Abstract

The purpose of this PPM Featured is (1) determining the shape of
electroplating tools that fit with the needs of Vocational High School Diponegoro
with low operating costs; (2) students and teachers can operate the
electroplating tool and metal plating with the correct procedures; (3) determining
the response of the students and teacher after practicing the metal
plating and the Vocational High School Diponegoro has its own electroplating
tool.
The method used in the PPM Featured electroplating are planning
the tool with the size as needed in Vocational High School Diponegoro,
easily portable, safe, minimal pollution, and easy to use. To prevent failure
in the PPM implementation, then all sizes and components used in the electroplating
tool together with the size and components used in the electroplating
tool based on research results. Testing and training the students and
teachers about the tool and operation of the metal plating appliance.
The implementation of PPM Featured produce something as follows:
(1) the construction shape of electroplating tool were rectangular a long
frame size of 1000 mm , 400 mm width and 750 mm height. Electroplating
bath size were 560 mm length, 300 mm width and 400 mm height. Nickel
solution volume was 55 liters. The framework equipped with troll in order
to be easily moved and also equipped with table, (2) 73 students had the
mean value > 78 and 1 teacher can operate and utilize the electroplating
tools for metal plating (iron/steel), (3) the responses of the students and
teacher after practice with electroplating tools were expressed great satisfaction.
Keywords: electroplating tools, plating, operation, and students