Trainer Kit Pneumatik sebagai Media Pembelajaran pada Mata Kuliah Mekatronika di Program Studi Pendidikan Vokasional Teknik Elektro Untirta

Yohanes Aldi Prapaskah, Universitas Sultan Ageng Tirtayasa, Indonesia
Endi Permata, Universitas Sultan Ageng Tirtayasa, Indonesia
Mohammad Fatkhurrokhman, Universitas Sultan Ageng Tirtayasa, Indonesia

Abstract


The research is a research and development (R&D) with the aim to produce learning media products in the form of pneumatic trainer kits and pneumatic jobsheet trainers as pneumatic material in mechatronics courses to determine the level of eligibility and strengthening of competencies in Vocational Education in Electrical Engineering FKIP Untirta. This study uses the 4D or Defne model, namely the problem definition stage to be investigated, Design which is the product design stage and the material design josbheet material, Development (Development), namely the product manufacturing stage, product validation as well as user testing with competency strengthening and Dessiminate. The final product resulting from this development research is in the form of an electropneatic trainer kit and jobsheet which is also the main object of research. The method used in collecting data in this study includes interviews, observation, questionnaires and test questions for strengthening psychomotor competence. Testing the feasibility level of pneumatic media trainer kit involves three media experts and three material experts, as well as testing for psychomotor competency strengthening conducted by students of the Electrical Engineering Vocational Education study program in the 6th semester of 2017. The power analysis technique uses quantitative descriptive analysis. Based on the results of the study obtained a score on the feasibility test of media experts to get 91.3 included in the category of "Very Eligible", scores on the feasibility test of material experts obtained 86.3 who were included in the category of "Very Eligible", and the results of the answers to the matter of strengthening psychomotor competence obtained a score of answering with "True" of 324 while the score of answering with "False" of 96 which states that a pneumatic trainer kit along with a pneumatic trainer josbheet can be used as a reinforcement of competence in mechatronics courses.


Keywords


r&d; 4d, learning media; pneumatic trainer kit; reinforcement

Full Text:

PDF

References


C. A. Wijaya, J. Handhika, and S. Kartikawati, “Pengembangan Media Pembelajaran Pengendali Kecepatan Dan Soft Starting Motor Listrik Berbasis Arduino Pada Mata Kuliah Penggunaan Dan Pengaturan Motor,” Jupiter (Jurnal Pendidik. Tek. Elektro), vol. 2, no. 2, p. 15, 2017.

P. Utami and P. Pardjono, “Perbedaan Jigsaw II dan GI terhadap pemahaman konsep dan pemecahan masalah masalah pada kompetensi mendiagnosis permasalahan pengoperasian PC dan Peripheral ditinjau dari motivasi belajar,” J. Pendidik. Vokasi, vol. 3, no. 2, Jun. 2013.

F. Eliza, D. E. Myori, F. G. Wireksi, J. T. Elektro, F. Teknik, and U. N. Padang, “Trainer Sistem Kendali Elektronik Untuk Pembelajaran Mengoperasikan Sistem Kendali Elektronik,” J. Edukasi Elektro, vol. 1, no. 2, pp. 110–118, 2017.

W. Sanjaya, Strategi Pembelajaran, 1st ed. Jakarta: Kencana Prenadamedia Group, 2006.

D. Yatim, “Penggunaan Penguatan Dalam Pembelajaran Bidang Studi Ppkn Di Kelas Ix Smpn 10 Tenggarong,” CENDEKIA J. Educ. Teach., vol. 10, no. 1, p. 79, 2016.

M. Mashoedah, “Kajian Penggunaan Media Pembelajaran dalam Pelatihan Peningkatan Kompetensi Profesional Guru,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 1, no. 1, pp. 17–25, 2015.

G. P. Cikarge and P. Utami, “Analisis dan Desain Media PEmbelajaran Praktik Teknik Digital sesuai RPS,” ELINVO(Electronics, Informatics, Vocat. Educ., vol. 3, no. 1, pp. 92–105, 2018.

H. Jati, D. Irmawati, P. Utami, B. Destiana, Sukirman, and D. Hariyanto, “Development of an online assessment based on the Shareable Content Object Reference Model (SCORM) to optimize the use of BeSmart UNY,” J. Phys. Conf. Ser., vol. 1456, p. 012018, Jan. 2020.

L. M. Kasenda, S. Sentinuwo, and V. Tulenan, “Sistem Monitoring Kognitif, Afektif dan Psikomotorik Siswa Berbasis Android,” J. Tek. Inform., vol. 9, no. 1, 2016.

W. Sumbodo, Pneumatikdan Hidrolik, 1st ed. Yogyakarta: CV Budi Utama, 2017.

E. P. Ismet, “Analisa sistem pneumatik alat pemotong serat alam,” J. Momentum, vol. 19, no. 2, pp. 50–56, 2017.

A. Kurniawan, A. N. Afandi, and D. Prihanto, “Pengembangan trainer PLC sebagai pengendali sistem pneumatik pada matapelajaran perekayasaan sistem kontrol bagi siswa kelas XII Teknik Elektronika Industri SMKN 1 Jenangan Ponorogo,” TEKNO, vol. 29, no. 1, p. 41, Mar. 2019.

W. Raharjo, “Rancang Bangun Alat Trainer Otomasi sebagai Media Pembelajaran Mata Kuliah Otomasi Industri Program Studi Teknik Industri Universitas Muhammadiyah Surakarta,” Universitas Muhammadiyah Surakarta, 2018.

M. A. A. Fauza and Ta’ali, “Pengembangan E-Modul Pengembangan Trainer Programmable Logic Controller (PLC) dan Elektropneumatik untuk Siswa SMK N 1 Bukittinggi,” Ranah Res. J. Multidiscip. Res. Dev., vol. 2, no. 2, pp.87–92, 2020.

S. Indah, B. A. Ikawanty, and M. Rifa’i, “Rancang Bangun Pengembangan Controller Loading Station pada Factory Trainer di Laboratorium Mekatronika,” J. Elektron. dan Otomasi Ind., vol. 1, no. 1, p. 23, Mar. 2014.

J. W. Adji, D. Aribow, and M. Fatkhurrohman, “Media Pembelajaran Trainer kitElektropneumatik pada Mata Pelajaran Sistem Pengendali Elektronik di SMK Negeri 4 Kota Serang,” JUPITER (Jurnal Pendidik. Tek. Elektro), vol. 5, no. 1, pp. 14–21, 2020.

J. W. Adji, D. Aribowo, and M. Fatkhurrohman, “Media Pembelajaran Trainer kitElektropneumatik pada Mata Pelajaran Sistem Pengendali Elektronik di SMK Negeri,” JUPITER(Jurnal Pendiikan Tek. Elektro), vol. 5, pp. 14–21, 2020.

Hariyanto, D. Aribowo, and M. Fatkhurrokhman, “Pengembangan Media Pembelajaran Trainer kitPengendali Motor 3 Phase Pada Mata Pelajaran Instalasi Motor Listrik Di SMKN 4 Kota Serang,” JUPITER(Jurnal Pendidik. Tek. Elektro), vol. 5, pp. 1–7, 2020.

H. Prabowo and F. Arifin, “Pengembangan Media Pembelajaran Kendali Fuzzy Logic Berbasis Arduino Nano Pada Mata Kuliah Praktik Sistem Kendali Cerdas,” Elinvo (Electronics, Informatics, Vocat. Educ.

H. Ashari, “Penguatan Kompetensi Pembelajaran Abad 21 melalui Pengintegrasian Literasi dalam Pembelajaran,” lpmplampung, 2020. [Online]. Available: http://lpmplampung.kemdikbud.go.id/detailpost/penguatan-kompetensi-pembelajaran-abad-21-melalui-pengintegrasian-literasi-dalam-pembelajaran.

S. Utami and P. Utami, “Penggunaan Whatsapp Group dan Google Classroom untuk Meningkatkan Partisipasi dan Hasil Belajar Peserta Didik Teknik Audio Video,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 5, no. 1, pp. 75–88, Sep. 2020.[22]P. Purnawan, “Efektifitas Trainer Pneumatik sebagai Media Pembelajaran pada Materi Pengontrolan Gerak Sekuensial,” Innov. Vocat. Technol. Educ., vol. 8, no. 1, Apr. 2017.




DOI: https://doi.org/10.21831/elinvo.v5i2.33798

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Elinvo (Electronics, Informatics, and Vocational Education)

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Our Journal indexed by:

ISSN 2477-2399 (online) || ISSN 2580-6424 (print)

View My Stats

Flag Counter