PEMBUATAN MESIN PAHAT PELUBANG STATIS UNTUK INDIUSTRI KECIL MEBEL KA YU

Authors

  • Darmono Darmono Universitas Negeri Yogyakarta

DOI:

https://doi.org/10.21831/ino.v9i1.5238

Abstract

A voucher program of manufacturing a static hole-making  wood- .chiseling machine for small-scale industrial companies producing wooden furniture was conducted with the objective of increasing the productivity of the wooden furniture production company of Indah Jaya in especially mak­ ing holes for joint construction in the furniture produced. Another objective was to determine the capacity and productivity of the machine itself.The program was conducted through the stages of planning the ma­ chine, manufacturing it, and training company workers in operating it. The planning stage covered the steps of drafting a design of the machine, calcu­ lating the materials for its manufacture, and estimating the cost of the manu­ facture. The manufacturing stage covered the steps of cutting the materials according to the design in the draft, welding some parts together, assem­ bling all the components into a unit, installing electrical appliances in it, testing its performance in operation, and painting it. The training stage co­ vered the steps of delivering a lecture on its theoretical aspects, demonstrat­ ing its operation, and giving company workers practice in operating it.The program has resulted in the actualization of a static hole-makingwood-chiseling machine and in company workers'  acquisition of skills in operating it. With a round iron frame 10 em in diameter combined with a wooden frame 6 cm by 12 ern in size, making it 120 ern by 100 em by 50 em in its dimensions, and powered by an SEM electrical motor generator of12HP and rotation speed of 2800 RPM, in its performance and productivity at making holes of the same form and size in wood the machine has been five to eight times faster than manual tools.
Keywords: hole-making  machine, small-scale woodfurniture  industry

Downloads

Published

2005-07-01

How to Cite

[1]
Darmono, D. 2005. PEMBUATAN MESIN PAHAT PELUBANG STATIS UNTUK INDIUSTRI KECIL MEBEL KA YU. INOTEKS: Jurnal Inovasi Ilmu Pengetahuan,Teknologi, dan Seni. 9, 1 (Jul. 2005). DOI:https://doi.org/10.21831/ino.v9i1.5238.

Issue

Vol 9, No 1 (2005)

Section

Articles

License

  1. Authors certify that the work reported here has not been published before and contains no materials the publication of which would violate any copyright or other personal or proprietary right of any person or entity.
  2. Authors transfer or license the copyright of publishing to Jurnal Civics: Media Kajian Kewarganegaraan to publish the article in any media format, to share, to disseminate, to index, and to maximize the impact of the article in any databases.
  3. Authors hereby agree to transfer a copyright for publishing to Jurnal Civics: Media Kajian Kewarganegaraanas a Publisher of the manuscript. 
  4. Authors reserve the following: 
    1. all proprietary rights other than copyright such as patent rights; 
    2. the right to use all or part of this article in future works of our own such as in books and lectures;
    3. use for presentation in a meeting or conference and distributing copies to attendees; 
    4. use for internal training by author's company;
    5. distribution to colleagues for their research use;
    6. use in a subsequent compilation of the author's works;
    7. inclusion in a thesis or dissertation;
    8. reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
    9. preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article); and
    10. voluntary posting on open web sites operated by author or author's institution for scholarly purposes, but it should follow the open access license of Creative Common CC BY-NC-SA License.