MODIFIKASI MESIN BOBOK KAYU UNTUK PENINGKATAN PRODUKTIVITAS MEBEL INDUSTRI KECIL
DOI:
https://doi.org/10.21831/ino.v7i1.5217Abstract
The problems of the furniture industry target are about the effectiveness of the use of wood chisel and bit machine because it hasn't fix machine bench for wood laying and the machine position that not ergonomic. These problems make. setting.. time longer, wood position unstable because of unfix bench, the vice easy to broken because of instability of wood, imprecision of hole position, and the exhausted operator because of the machine position.The main goal of this voucher program is to modify wood chisel and bit machine for preparing the connection between pin and its hole at U.O ..TANGGUH, small scale furniture industry, so that productivity and quality of the furniture will be improved. For mass production, every step must be done perfectly and carefully so that every part can be connected and constructed correctly. Because of the reason. above wood and chisel machine that strong, easy to operate.: easy to lay wood accurately, and ergonomic must be developed. ,Wood and chisel machine that be developed has 220 cm length and 30 ernwidth of its bench so that the wood with 200 em length or 'more can be supported accurately especially at its parallel position to the machine vice. For operating the machine easily, the machine bench is made approximately 50 em height, so that the operator with sit down position can operate the machine without exhausted. The wood 'chisel and bit machine can make the hole approximately 7 em depth and 1 ern width., The result of the machine performance test show that the machine can be. operated easily without exhausted. The hole is easily to be made on wood with 200ern length without setting wood position. The hole position is automatically perpendicular to the horizontal line of the wood so that in accordance with the hole position on the wood. There is no vibration on bench and the machine. This condition shows that the construction design is strong enough to the vibration of the motor revolution and the hole feeding.
Downloads
How to Cite
[1]
Karyono, S. and Purnomo, E. 2015. MODIFIKASI MESIN BOBOK KAYU UNTUK PENINGKATAN PRODUKTIVITAS MEBEL INDUSTRI KECIL. INOTEKS: Jurnal Inovasi Ilmu Pengetahuan,Teknologi, dan Seni. 7, 1 (Aug. 2015). DOI:https://doi.org/10.21831/ino.v7i1.5217.
Issue
Section
Articles
License
- Authors certify that the work reported here has not been published before and contains no materials the publication of which would violate any copyright or other personal or proprietary right of any person or entity.
- Authors transfer or license the copyright of publishing to Jurnal Civics: Media Kajian Kewarganegaraan to publish the article in any media format, to share, to disseminate, to index, and to maximize the impact of the article in any databases.
- Authors hereby agree to transfer a copyright for publishing to Jurnal Civics: Media Kajian Kewarganegaraanas a Publisher of the manuscript.
- Authors reserve the following:
- all proprietary rights other than copyright such as patent rights;
- the right to use all or part of this article in future works of our own such as in books and lectures;
- use for presentation in a meeting or conference and distributing copies to attendees;
- use for internal training by author's company;
- distribution to colleagues for their research use;
- use in a subsequent compilation of the author's works;
- inclusion in a thesis or dissertation;
- reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
- preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article); and
- voluntary posting on open web sites operated by author or author's institution for scholarly purposes, but it should follow the open access license of Creative Common CC BY-NC-SA License.
