MESIN PENGERING KERUPUK HEMAT ENERGI TINTUK MENINGKATKA}I PRODUKTIVIAS PRODIISEN KERUPUK
DOI:
https://doi.org/10.21831/ino.v7i1.4995Abstract
The objectiveof
producing
a low energy
drying machine
is
to
help
chips
industries
in increasing
their
productivify
by
shortening
the drying
time. Up to
now
they
use heat of sunlight to dry
the
chips.
This
process
is rime consuming
arrd
why the dry season
colnes,
the
process is
delayed.
It decreases the
quality
of chips. fhe drying machine
produced
uses firewood
placed
in a furnace
as the
heat source.
The
heat
is then flown through
pipes
into
the
drying room, where wet
chips are
placed.
,,;
The
room
has
a
length
of 1.2 m, a height
of
I m and a width
ot-
I m. It
has two
doors and equipped
with a thermometer. Below the room,
there is a furnace having
capacity
cf
6 kg f-rre wood
and
an oxygen
inlet. The drying temperature
is 60
I kg firewood
can
produce
the
heat with
temperature
of
60
-
70o
C for
1.5
hours.The
drying
process
of wet
chips takes about 5 hours,
For that of half
dry
chips, it takes
2
hours. This
machine
has capacify of
2.400
rvet
chips and 6.000
half
dry
chips.
Downloads
Published
2005-06-01
How to Cite
[1]
-, S. -. and S, S.R. 2005. MESIN PENGERING KERUPUK HEMAT ENERGI TINTUK MENINGKATKA}I PRODUKTIVIAS PRODIISEN KERUPUK. INOTEKS: Jurnal Inovasi Ilmu Pengetahuan,Teknologi, dan Seni. 7, 1 (Jun. 2005). DOI:https://doi.org/10.21831/ino.v7i1.4995.
Issue
Section
Articles
License
- Authors certify that the work reported here has not been published before and contains no materials the publication of which would violate any copyright or other personal or proprietary right of any person or entity.
- Authors transfer or license the copyright of publishing to Jurnal Civics: Media Kajian Kewarganegaraan to publish the article in any media format, to share, to disseminate, to index, and to maximize the impact of the article in any databases.
- Authors hereby agree to transfer a copyright for publishing to Jurnal Civics: Media Kajian Kewarganegaraanas a Publisher of the manuscript.
- Authors reserve the following:
- all proprietary rights other than copyright such as patent rights;
- the right to use all or part of this article in future works of our own such as in books and lectures;
- use for presentation in a meeting or conference and distributing copies to attendees;
- use for internal training by author's company;
- distribution to colleagues for their research use;
- use in a subsequent compilation of the author's works;
- inclusion in a thesis or dissertation;
- reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
- preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article); and
- voluntary posting on open web sites operated by author or author's institution for scholarly purposes, but it should follow the open access license of Creative Common CC BY-NC-SA License.