ALAT PELAPIS LOGAM ELECTROPATING HASIL PENELITIAN UNTUK PRAKTIK SISWA SMK

Authors

  • Soeprapto Rachmad Said, Heri Wibowo, Riswan Dwi Jatmiko

DOI:

https://doi.org/10.21831/ino.v18i1.3121

Abstract

The purpose of this PPM Featured is (1) determining the shape of
electroplating tools that fit with the needs of Vocational High School Diponegoro
with low operating costs; (2) students and teachers can operate the
electroplating tool and metal plating with the correct procedures; (3) determining
the response of the students and teacher after practicing the metal
plating and the Vocational High School Diponegoro has its own electroplating
tool.
The method used in the PPM Featured electroplating are planning
the tool with the size as needed in Vocational High School Diponegoro,
easily portable, safe, minimal pollution, and easy to use. To prevent failure
in the PPM implementation, then all sizes and components used in the electroplating
tool together with the size and components used in the electroplating
tool based on research results. Testing and training the students and
teachers about the tool and operation of the metal plating appliance.
The implementation of PPM Featured produce something as follows:
(1) the construction shape of electroplating tool were rectangular a long
frame size of 1000 mm , 400 mm width and 750 mm height. Electroplating
bath size were 560 mm length, 300 mm width and 400 mm height. Nickel
solution volume was 55 liters. The framework equipped with troll in order
to be easily moved and also equipped with table, (2) 73 students had the
mean value > 78 and 1 teacher can operate and utilize the electroplating
tools for metal plating (iron/steel), (3) the responses of the students and
teacher after practice with electroplating tools were expressed great satisfaction.
Keywords: electroplating tools, plating, operation, and students

Author Biography

Soeprapto Rachmad Said, Heri Wibowo, Riswan Dwi Jatmiko

FT Universitas Negeri Yogyakarta
E-mail:

Downloads

Published

2014-02-01

How to Cite

[1]
Riswan Dwi Jatmiko, S.R.S.H.W. 2014. ALAT PELAPIS LOGAM ELECTROPATING HASIL PENELITIAN UNTUK PRAKTIK SISWA SMK. INOTEKS: Jurnal Inovasi Ilmu Pengetahuan,Teknologi, dan Seni. 18, 1 (Feb. 2014). DOI:https://doi.org/10.21831/ino.v18i1.3121.

Issue

Vol 18, No 1 (2014)

Section

Articles

License

  1. Authors certify that the work reported here has not been published before and contains no materials the publication of which would violate any copyright or other personal or proprietary right of any person or entity.
  2. Authors transfer or license the copyright of publishing to Jurnal Civics: Media Kajian Kewarganegaraan to publish the article in any media format, to share, to disseminate, to index, and to maximize the impact of the article in any databases.
  3. Authors hereby agree to transfer a copyright for publishing to Jurnal Civics: Media Kajian Kewarganegaraanas a Publisher of the manuscript. 
  4. Authors reserve the following: 
    1. all proprietary rights other than copyright such as patent rights; 
    2. the right to use all or part of this article in future works of our own such as in books and lectures;
    3. use for presentation in a meeting or conference and distributing copies to attendees; 
    4. use for internal training by author's company;
    5. distribution to colleagues for their research use;
    6. use in a subsequent compilation of the author's works;
    7. inclusion in a thesis or dissertation;
    8. reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
    9. preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article); and
    10. voluntary posting on open web sites operated by author or author's institution for scholarly purposes, but it should follow the open access license of Creative Common CC BY-NC-SA License.