Building an ergonomics conceptual framework: Identification of compliance with educational facilities and infrastructure standards

Cindy Putri Nur Azizah; Rohmatun Lukluk Isnaini

doi:10.21831/jamp.v11i1.58162

Building an ergonomics conceptual framework: Identification of compliance with educational facilities and infrastructure standards

Cindy Putri Nur Azizah, UIN Sunan Kalijaga Yogyakarta., Indonesia
Rohmatun Lukluk Isnaini, UIN Sunan Kalijaga Yogyakarta., Indonesia

10.21831/jamp.v11i1.58162

Abstract

The lack of knowledge about the rules and principles of ergonomics in managing educational facilities and infrastructure will reduce the concentration and comfort of students in learning. This article aims to examine the understanding of ergonomic principles in the management of school infrastructure and learning activities in the classroom. The approach used in this research is descriptive qualitative, which is library research. The data collection technique is done by tracing literature such as books, journals, and other articles that support the writing process. The chosen method is qualitative descriptive analysis, which is by understanding and compiling the collected data and then organizing it systematically to draw conclusions. The results of this study indicate that the knowledge of management managers regarding the principles of ergonomics of facilities and infrastructure in learning is relevant to efforts to increase student concentration and comfort in learning. By compiling this article, it is hoped that educators will pay more attention to ergonomic principles in managing educational facilities and infrastructure. So that students get comfort and total concentration in learning.

Keywords

ergonomics; facilities and infrastructure management; education

Full Text:

PDF

References

Aditya, Y., Salayanti, S., & Palupi, F. R. (2017, December 1). Perancangan Interior Islamic Boarding School As-syifa Kampus 2 Tanggerang. E-Proceeding of Art & Design. https://openlibrarypublications.telkomuniversity.ac.id/index.php/artdesign/article/view/5007/0

Aryadi, V. F., & Susilowati, I. H. (2021). Kajian Ergonomi Sarana Pendukung Proses Belajar Terhadap Keluhan Gotrak Mahasiswa Institusi Pendidikan X. Prepotif : Jurnal Kesehatan Masyarakat, 5(2), 742–748. https://doi.org/10.31004/PREPOTIF.V5I2.1928

Baharudin, F. R., & Palerangi, A. M. (2017). Analisis Ergonomi Lingkungan Fisik Bengkel Kerja Program Keahlian Teknik Permesinan SMK di Kota Makassar. Jurnal Teknik Mesin Teknologi, 17(1), 39–48. https://ojs.unm.ac.id/teknologi/article/view/7382

Biomi, A. A., & Dharmayanti, C. I. (2021). Meja Dan Kursi Belajar Ergonomis Mengurangi Keluhan Muskuloskeletal Siswa Smp Tunas Daud Di Denpasar. Jurnal Ergonomi Indonesia, 7(2), 129–134. https://ojs.unud.ac.id/index.php/jei/article/view/71380

Devinasari, N., Wibowo, M., & Suprobo, F. P. (2019). Studi Antropometri Siswa Sekolah Dasar Negeri untuk Desain Mebel Ruang Kelas yang Ergonomis di Kecamatan Wonocolo, Surabaya. Intra, 7(2), 493–502. https://publication.petra.ac.id/index.php/desain-interior/article/view/8959

Fauzi, S., Lukluk Isnaini, R., Dzunur’aini, R., & Fajrin, N. (2022). Dampak Ketidaksesuain Ergomoni Sarana Kursi Kayu Pada Kenyamanan Pendidik : Field Study AMM Yogyakarta . Jurnal Ergonomi Indonesia (The Indonesian Journal of Ergonomic, 8(2), 14–22. https://ojs.unud.ac.id/index.php/jei/article/view/86830

Hadi, Y., Azaria, T., Purnomo, Putrianto, N. K., Oktiarso, T., Ekawati, Y., & Noya, S. (2020). Analisis Kenyamanan Termal Ruang Kuliah. Jurnal Metris, 21(1), 13–26. http://ojs.atmajaya.ac.id/index.php/metris/article/view/1640

Hapsari, P. S. (2011). Kenyamanan Furnitur Kelas B di TK Aisyiyah 61 Serengan Berdasar Ergonomi Dan Antropometri. Gelar : Jurnal Seni Budaya, 9(2). https://jurnal.isi-ska.ac.id/index.php/gelar/article/view/1397

Harahap, P., Nurul Huda, L., & Pujangkoro, S. A. (2013). Analisis Ergonomi Redesain Meja dan Kursi Siswa Sekolah Dasar. Jurnal Teknik Industri FT USU, 3(2), 38–44. https://www.neliti.com/id/publications/219410/analisis-ergonomi-redesain-meja-dan-kursi-siswa-sekolah-dasar

Hermanto, Sinambela, S., & Irvan, M. (2017). Usulan Rancangan Ukuran pada Meja dan Kursi Lipat Belajar yang Ergonomis untuk Rumah Petak di Jakarta. Jurnal Sains & Teknologi: Ikra-Ith Teknologi, 1(2), 9–15. https://journals.upi-yai.ac.id/index.php/ikraith-teknologi/article/view/94

Herwanto, D., Nugraha, A. E., Kusnadi, K., Herwanto, D., Nugraha, A. E., & Kusnadi, K. (2018). Kajian Aspek Ergonomi pada Laboratorium Komputer untuk Meningkatkan Kenyamanan Belajar Siswa. JTERA (Jurnal Teknologi Rekayasa), 3(1), 1–10. https://doi.org/10.31544/JTERA.V3.I1.2018.1-10

Hidayati, L. (2018). Kajian Ergonomi di Sentra Persiapan BCCT: Menggugah Minat Baca-Tulis Anak Usia Dini Melalui Penataan Lingkungan Belajar yang Ergonomis. Al-Hikmah : Indonesian Journal of Early Childhood Islamic Education, 2(2), 127–142. https://doi.org/10.35896/IJECIE.V2I2.33

Hutabarat, J. (2021). Dasar-Dasar Pengetahuan Ergonomi (MNC Publishing, Ed.; 1st ed., Vol. 1). Media Nusa Creative.

Idkhan, M., Rera Baharuddin, F., & Palerangi, A. M. (2021). Analisis Ergonomi (H. Upu, Ed.; 1st ed., Vol. 1). Global Research and Consulting Institute. https://www.freepik.com/free-

Indrawati, S., Santika, B. B., & Suyatno, S. (2017). Analisis Kebisingan Arus Lalu Lintas terhadap Kegiatan Belajar Mengajar (KBM) di SMA Swasta Surabaya. Jurnal Fisika Dan Aplikasinya, 13(1), 14–18. https://doi.org/10.12962/J24604682.V13I1.2131

Mahira, E. D., Fasilitas, P., Dan, B., Yang, B., Bagi, E., & Paud, A.-A. (2018). Perancangan Fasilitas Belajar Dan Bermain Yang Ergonomis Bagi Anak-Anak Paud (Studi Kasus: PAUD Angsa, Gugus Mawar, Denpasar Utara). Jurnal Ilmiah Vastuwidya, 1(2), 79–86. http://www.ejournal.universitasmahendradatta.ac.id/index.php/vastuwidya/article/view/28

Moleong, L. J. (2009). Metodologi Penelitian Kualitatif (1st ed., Vol. 1). PT Remaja Rosdakarya.

Mutmainah, M., & Sari, M. (2018). Perancangan Alat Bantu Alat Pemantau Area Produksi Yang Ergonomis Dengan Metode Value Engineering (Studi Kasus PT BT). JISI: Jurnal Integrasi Sistem Industri, 5(1), 51–62. https://doi.org/10.24853/JISI.5.1.51-62

Nurhajati, N. (2016). Pelaksanaan Penghijauan Kota Dalam Menanggulangi Pencemaran Udara Di Wilayah Kecamatan Ngunut Kabupaten Tulungagung. Publiciana, 9(1), 1–20. https://journal.unita.ac.id/index.php/publiciana/article/view/71/65

Nurhuzna, A., & Alahudin, M. (2017). Evaluasi Kinerja Ruang Kelas Sd Negeri Cenderawasih Kabupaten Merauke. MUSTEK ANIM HA, 6(1), 57–83. https://doi.org/10.35724/MUSTEK.V6I1.673

Safri Setiawan, M., Agripina Hadyanawati, A., Ragil Suryoputro, M., & Teknik Industri, J. (n.d.). Seminar Nasional IENACO-2019.

Santoso, G., Stasiun, :, Secara, K., Untuk, E., Belajar, K., Kelas, D., Kerja, S., & Secara, K. (2011). Stasiun Kerja Komputer Secara Ergonomis Untuk Kegiatan Belajar Di Kelas Gempur Santoso. WAKTU: Jurnal Teknik UNIPA, 9(2), 59–62. https://doi.org/10.36456/WAKTU.V9I2.922

Sarinda, A., Sudarti, ), Subiki, ), Program, M., & Fisika, S. P. (2017). Analisis Perubahan Suhu Ruangan Terhadap Kenyamanan Termal Di Gedung 3 Fkip Universitas Jember. Jurnal Pembelajaran Fisika, 6(3), 312–318. https://doi.org/10.19184/JPF.V6I3.5329

Sugianto Putri, R. (2014). Hubungan Ukuran Meja dan Kursi Ergonomis dengan Kenyamanan Melalui Posisi Duduk Murid Taman Kanak-kanak Dewi Sartika Surabaya. BioKultur, III(1), 277–291.

Susanti, L., & Aulia, N. (2016). Evaluasi Kenyamanan Termal Ruang Sekolah SMA Negeri di Kota Padang. Jurnal Optimasi Sistem Industri, 12(1), 310–316. https://doi.org/10.25077/josi.v12.n1.p310-316.2013

Sutajaya, P. W. M. I. M. (2016). Ergonomi Dalam Pembelajaran Menunjang Profesionalisme Guru Di Era Global. JPI (Jurnal Pendidikan Indonesia), 5(1), 82–96. https://doi.org/10.23887/JPI-UNDIKSHA.V5I1.8933

Sutarnitri, N. P. D., Citrawathi, D. M., & Sutajaya, I. M. (2020). Perbaikan Pencahayaan Ruang Kelas Menurunkan Kelelahan Mata dan Kebosanan Belajar Peserta Didik pada Pembelajaran Biologi di SMA. Jurnal Pendidikan Biologi Undiksha, 7(3), 164–172. https://ejournal.undiksha.ac.id/index.php/JJPB/article/view/31716

Taifa, I. W., & Desai, D. A. (2017). Anthropometric measurements for ergonomic design of students’ furniture in India. Engineering Science and Technology, an International Journal, 20(1), 232–239. https://doi.org/10.1016/J.JESTCH.2016.08.004

Tarihoran, D., Irawan, R., Astiarani, Y., & Heidy, H. (2021). Kesesuaian Ergonomi Meja Belajar dengan Data Antropometri Siswa di Sekolah Dasar Jakarta Utara. Jurnal Kesehatan Masyarakat Dan Lingkungan Hidup, 6(1), 10–22. https://doi.org/10.51544/JKMLH.V6I1.1682

Tarwaka, Bakri, S. H., & Sudiajeng, L. (2004). Ergonomi Untuk Keselamata, Kesehatan Kerja dan Produktivitas (A. Manuba, I. S. Aziz, & H. Santosa, Eds.; 1st ed., Vol. 1). UNIBA Press. https://123dok.com/document/q5wn11gq-ergonomi-untuk-kesetan-kesehatan-kerja-produktivitas-solichul-achmad.html

Widiastuti, I. (2007). Tinjauan Prinsip-prinsip Ergonomi dalam Perbaikan Sarana Pembelajaran di Prodi Pendidikan Teknik Mesin UNS. Performa: Media Ilmiah Teknik Industri, 5(1), 87–92. https://doi.org/10.20961/PERFORMA.5.1.11614

Witjaksono, A., & Kurniasari, W. (2018). Gambaran Intensitas Pencahayaan Dan Kelelahan Mata Pada Siswa SDN Pagadean Subang. Jurnal Sehat Masada, 12(1), 73–84. https://doi.org/10.38037/JSM.V12I1.58

Yusuf, M., Simanjuntak, R. A., Rahmawati, N., & Susiladewi, D. M. (2021). Perancangan Ulang Meja Belajar Mahasiswa Menggunakan Metode Rekayasa Nilai dan Pendekatan Ergonomi. Jurnal Teknologi, 14(2), 186–191. https://doi.org/10.34151/JURTEK.V14I2.3629

Zed, M. (2008). Metode Penelitian Kepustakaan. In R. Kreative Design (Ed.), Yayasan Obor Indonesia (2nd ed.). Yayasan Obor Indonesia. https://books.google.com/books/about/Metode_peneletian_kepustakaan.html?hl=id&id=iIV8zwHnGo0C

DOI: https://doi.org/10.21831/jamp.v11i1.58162