PENGARUH PENGGUNAAN KOLOM PASIR, LAYER PASIR, DAN TERUCUK BAMBU PADA TANAH LEMPUNG JENUH AIR TERHADAP PENURUNAN TANAH LEMPUNG MENGGUNAKAN UJI LABORATORIUM

Dian Eksana Wibowo, UNY, Indonesia
Satriarda Dirgantara S., UNY, Indonesia
Ridwan Kurniawan, UNY, Indonesia

Abstract


ABSTRAK

Penelitian ini bertujuan untuk mengetahui klasifikasi jenis tanah, properti tanah pengujian dan pengaruh penggunaan metode penambahan variasi tanah lempung jenuh air dengan menggunakan pasir dan cerucuk bambu, terhadap penurunan tanah lempung, kadar air, dan analisis T90. Penelitian eksperimen dengan menggunakan model boks baja, berukuran 100 cm x 100 cm x 40 cm sebagai media penempatan tanah lempung. Hasil penelitian ini yaitu: (1) Jenis tanah termasuk CH (Clay High Plasticity) menurut klasifikasi USCS dan kelompok 4-7-6(40) menurut klasifikasi AASTHO. (2) Properti tanah adalah G=2,63, LL=74,71%, PL=29,76%, IP=44,95%, SL=19,06%, C=0,75 kg/cm2, OMC=39,2%. (3)  Penambahan TPV sangat efektif memperkecil penurunan. Pada pemberian tekanan 0,0125 kg/cm2, 0,025 kg/cm2, 0,05 kg/cm2, dan 0,01 kg/cm2 memperkecil penurunan, berturut-turut: 75,93%; 56,32%; 59,44% dan 42,32%. Pada kedalaman -10 cm penggunaan TPH paling efektif mengurangi kadar air tanah lempung  yaitu sebesar 53,30%, berarti mengurangi kadar air sebesar 3,62% dari kondisi tanah asli (TTD). Pada kedalaman 20 cm, penggunaan TCB paling efektif mengurangi kadar air sebesar 3,55% dari kadar air tanah lempung asli (TTD). Penggunaan CTPVH pada beban 0,1 kg/cm2 paling efektif dalam proses konsolidasi yaitu sebesar 94,10% dari tanah asli (TTD) dimana mempunyai nilai sebesar nilai t90 untuk CTPVH yaitu sebesar 15,21 menit.

 

Kata Kunci: air, perkuatan, tanah lempung, T90

 

 

ABSTRACT

 

This study aims to determine the classification of soil types, soil properties tested and the effect of using the method of adding variations in the water-saturated clay, using sand and bamboo piles, to clay settlement, moisture content, and T90 analysis. The experimental study used a steel box model, measuring 100 cm x 100 cm x 40 cm as a medium for clay placement. The results of this study are: (1) Soil types including CH (Clay High Plasticity) according to USCS classification and groups 4-7-6 (40) according to AASTHO classification. (2) Soil properties is G=2,63, LL=74,71%, PL=29,76%, IP=44,95%, SL=19,06%, C=0,75 kg/cm2, OMC=39,2%. (3) Addition of TPV is very effective in reducing the settlement. At a pressure of 0,0125 kg/cm2, 0,025 kg/cm2, 0,05 kg/cm2, and 0.01 kg/cm2 minimizing the settlement,  respectively: 75,93%; 56,32%; 59,44% and 42,32%. At depths of -10 cm the most effective use of TPH reduces clay soil moisture content by 53,30%, which means reducing water content by 3,62% from the original soil conditions (TTD). At a depth of 20 cm, using TCB is most effective at reducing water content by 3,55% from the original clay soil content (TTD). The use of CTPVH at a load of 0,1 kg/cm2 is most effective in the consolidation process which is 94.10% of the original soil (TTD) which has a value of T90 for CTPVH which is 15,21 minutes.

 

Keywors: water, strainthening, clay, T90

Keywords


air, perkuatan, tanah lempung, T90

Full Text:

PDF


DOI: https://doi.org/10.21831/inersia.v16i1.31316

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Dian Eksana Wibowo, Satriarda Dirgantara S., Ridwan Kurniawan

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

 

Publisher:                   Co-Publisher:

Indexed by:
 
  
 

Supported by:
Jurnal Ilmiah Magister Managemen
 

Social Media:


 Online (e-ISSN): 2528-388X  || Printed (p-ISSN): 0216-762X

Lisensi Creative Commons
INERSIA by https://journal.uny.ac.id/index.php/inersia/index was distributed under a Creative Commons Attribution 4.0 International License.