Analisa Komparasi Sifat Fisis dan Mekanis Piston Sepeda Motor dari Empat Pabrikan
DOI:
https://doi.org/10.21831/jpvo.v6i2.72932Keywords:
motorcycle, piston, microstructureAbstract
The piston is an essential component in the internal combustion system. Unfortunately, most piston products on the market are of low quality, which is detrimental to consumers. Most pistons sold in spare parts shops in Medan City have varying prices and different quality. The study compares four manufacturers' chemical composition, microstructure and hardness of the pistons of 4-stroke motorcycles. The four types of pistons were purchased at an automotive component sales shop in Medan city. The pistons were cut by machine and then analyzed for chemical composition, microstructure and hardness. The research results show that the chemical composition of the four-piston manufacturers is almost similar, where the silicon content ranges from 2-3%, which is a hypoeutectic Al-Si aluminium alloy. Interestingly, the hardness values and microstructure of pistons are different. The hardness value for brand X is the highest compared to other products, at 41.16 VHN. Microstructural observations show that the microstructures of manufacturers W, X and Y are similar, where the Si particles are evenly distributed with almost uniform sizes. Meanwhile, the Z manufacturer shows a microstructure with fibrous Si particles with a coarse SDAS size.References
BPS. (2024). Perkembangan Jumlah Kendaraan Bermotor Menurut Jenis (Unit), 2021-2022
Darmawan, H. (2016). Perbandingan Ketahanan Aus Piston GENUINE PART Dan Piston Imitasi Terhadap Piston Daur Ulang. Yogyakarta: Skripsi, D3 Teknik Mesin Universitas Muhammadiyah Yogyakarta.
Kamiluddin, M. (2008). Pengaruh penambahan unsur mangan pada paduan aluminium 7wt% silikon terhadap sifat fisik dan mekanik lapisan intermetalik pada fenomena die soldering= The effect of additional Mn element at aluminium alloy 7wt% silicon to physical and mechanical properties of intermetallic layer at die soldering phenomenon.
Mizhar, S., & Fauzi, R. (2016). Pengaruh penambahan magnesium terhadap kekerasan, kekuatan impak dan struktur mikro pada aluminium paduan (Al-Si) dengan metode lost foam casting. MEKANIK: Jurnal Ilmiah Teknik Mesin, 2(2).
Nindhia, T. G. T. (2010). Studi Struktur mikro Silikon dalam Paduan Aluminium-Silikon pada Piston dari Berbagai Merek Sepeda Motor. Jurnal Ilmiah Teknik Mesin CakraM Vol, 4(1), 31-34.
Nofri, M. (2019). Perbandingan Nilai Kekerasan Dan Struktur Mikro Material Piston Sepeda Motor 4 Tak Original Dan Imitasi. BINA TEKNIKA, Volume 15.
Nurhadi, N. (2010). STUDI KARAKTERISTIK MATERIAL PISTON DAN PENGEMBANGAN PROTOTIPE PISTON BERBASIS LIMBAH PISTON BEKAS Diponegoro University].
Nusa, M. S. (2016). FENOMENA TERJADINYA KERUSAKAN PADA MATERIAL BATANG PISTON THE PHENOMENON OF DAMAGE TO THE PISTON ROD MATERIAL. BPPT.
Shahsavand, A., Azadi, M., & Parast, M. S. A. (2023). Microscopic study on the effect of nano-clay-particles on wear behaviors of piston aluminum-silicon alloy under various forces and speeds. Micron, 168, 103429.
Suherman, P. R., & Ridwan, P. (2018). Effect of Cu Addition on Microstructure, Hardness and Fluidity of Aluminium Alloy Al-10Si. Ready Star, 1(1), 108-115.
Suherman, S., & Fahrizal, F. (2017). Pengaruh Penambahan Mn Terhadap Sifat Mekanis Dan Struktur Mikro Pada Paduan Al-10si Dengan Metode Lost Foam Casting. Majalah Ilmiah Momentum, 13(1).
Suherman, S., & Syahputra, S. (2014). Pengaruh Penambahan Cu Dan Solution Treatment Terhadap Sifat Mekanis Dan Struktur Mikro Pada Aluminium Paduan A356. Jurnal Dinamis, 2(14).
Suherman, Y., Surya Murni, & Sitorus, M. (2018). Perbandingan Kekerasan dan Struktur Mikro Material Crank Shaft Sepeda Motor Beberapa Merk. Jurnal Ilmiah Teknik Mesin" MEKANIK", 4(1).
Sumiyanto, S. (2021). Analisa Perbandingan Kualitas Katup Original, Katup Original Ex-Pakai Dan Katup Imitasi Sepeda Motor YJZ 110. cc. Jurnal Universitas Dian Nusantara/Tera/,, Isue 1, Edisi Maret 2021, Halaman: 84-97, 1(1), 84-97.
Supriyanto, L., BAYUSENO, A. P., & UMARDANI, Y. (2009). Identifikasi Sifat Mekanik dan Struktur Mikro Material Ring Piston Sepeda Motor Honda Supra X.
Zhang, B., Ma, X., Liu, L., Wang, Y., Yu, H., Morina, A., & Lu, X. (2024). Reciprocating sliding friction behavior and wear state transition mechanism of cylinder liner and piston ring. Wear, 205293.
Downloads
Published
How to Cite
Issue
Section
License
Jurnal Pendidikan Vokasi Otomotif allows readers to read, download, copy, distribute, print, search, or link to the full texts of its articles and allow readers to use them for any other lawful purpose. The journal allows the author(s) to hold the copyright without restrictions. Finally, the journal allows the author(s) to retain publishing rights without restrictions
Jurnal Pendidikan Vokasi Otomotif is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://journal.uny.ac.id/index.php/jpvo.
