PEMBUATAN MESIN PEMOTONG BATU UNTUK INDUSTRI ABSTRACT KECIL ORNAMEN BANGUNAN

Authors

  • V Lilik Hariyanto

DOI:

https://doi.org/10.21831/ino.v7i1.5002

Abstract

The voucher
program
entitled
"Manufacturing
Ornamental Stone
Cutting
Machine for
Small Building
Ornament Industries" aims to
increase
productivity
of the
CV. PURBA
KRIASTA especially
in cutting
ornamental
stone
being
produced" It
also
wants
to know the
size and
productivity
of such ornamental stone machine.
The
steps of
this manufacturing ornamental stone
cutting
machine are
planning,
machine
manufacturing,
and
training fbr industry
partner
workers.
The
planning
step includes
:
(l)
designing machine
plan
draft,
(2)
calculating
the
needed
materials,
and
(3)
calculating
the implementation cost
. The machine-manufacturing
step
includes
:
(l)
material cutting to fit the work draft,
(2)
welding,
(3)
assembling,
(4)
electric
installation.
(5)
machine
performance
test, and
(6)
painting.
The training
for industry
partner
workers consists
of :(l) theory and speech
delivery,
(2)
demonstration
of machine using, and
(3)
machine
using
practice
by the
industry
partner
workers.
The result of the
voucher
program
is realization of an ornamental
stone cutting
machine and
skill
achievement
by the
industry
partner
workers
in
the
machine
operation.
The ornamental
stone
cutting
machine was
made of
right-angled
iron frame
sizing 80x80x7 mm,50x50x5 mm, and 30x30x3 mm, combined
with steel
plate
of 3
mm thick. The machine size
is
120 cm length, 60 crn width,
and 190 crn height,
moved by a I
phase
electric motor
power
SEM of I HP and rotation
speed of
2800
RPM. The cooling system
uses
water moved by an aquarium
pump.
The
machinE
performance
and
productivity
especially
for cutting
straight
forms has speed
of 8
to
l0
times faster compared
with manual
cutting having been done
up till
now.
Key words :
stone cutting
machine, and
small
ornamental
stone industry.

Downloads

Published

2005-06-01

How to Cite

[1]
Hariyanto, V.L. 2005. PEMBUATAN MESIN PEMOTONG BATU UNTUK INDUSTRI ABSTRACT KECIL ORNAMEN BANGUNAN. INOTEKS: Jurnal Inovasi Ilmu Pengetahuan,Teknologi, dan Seni. 7, 1 (Jun. 2005). DOI:https://doi.org/10.21831/ino.v7i1.5002.

Issue

Vol 7, No 1 (2004)

Section

Articles

License

  1. Authors certify that the work reported here has not been published before and contains no materials the publication of which would violate any copyright or other personal or proprietary right of any person or entity.
  2. Authors transfer or license the copyright of publishing to Jurnal Civics: Media Kajian Kewarganegaraan to publish the article in any media format, to share, to disseminate, to index, and to maximize the impact of the article in any databases.
  3. Authors hereby agree to transfer a copyright for publishing to Jurnal Civics: Media Kajian Kewarganegaraanas a Publisher of the manuscript. 
  4. Authors reserve the following: 
    1. all proprietary rights other than copyright such as patent rights; 
    2. the right to use all or part of this article in future works of our own such as in books and lectures;
    3. use for presentation in a meeting or conference and distributing copies to attendees; 
    4. use for internal training by author's company;
    5. distribution to colleagues for their research use;
    6. use in a subsequent compilation of the author's works;
    7. inclusion in a thesis or dissertation;
    8. reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
    9. preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article); and
    10. voluntary posting on open web sites operated by author or author's institution for scholarly purposes, but it should follow the open access license of Creative Common CC BY-NC-SA License.