3-Dimensional Numerical Simulation of Nailed Slab System Settlement Behavior on Soft Soil
Hary Christady Hardiyatmo, Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada, Yogyakarta 55281, Indonesia
Ahmad Rifa'i, Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada, Yogyakarta 55281, Indonesia
Abstract
The design of the YIA airport rail line is on soft soil with a depth of 12-16 m. The design of the rail line uses a 4 m high embankment. Reinforcement is carried out by the method of a nailed slab system. The nailed slab system consists of a monolithically connected slab and pile. This method is believed to be able to reduce the settlement that occurs in the foundation soil effectively. This study aims to determine the effect of using a nailed slab system that varies in length, distance, and arrangement. The data used are boring and laboratory tests. Effect of variations in length (8 m; 10 m; 12 m and 14 m), distance (0.8 m; 1.2 m; 1.6 m; and 2 m), and pile arrangement (uniform; V and W) on soil settlement foundation is done with the RS3 program. The results showed that each additional 2 m of pile length could reduce the total settlement by 48.63%-82.31% of the unreinforced foundation soil. The decrease in permits was fulfilled at the length of the piles of 12 m and 14 m. Pile spacing of 0.8 m, 1.2 m, 1.6 m, and 2 m reduced the total settlement by 69.47%, 68.78%, 67.22%, and 60.90%, respectively. On piles with a length of 12 m, distances of 0.8 m and 1.2 m fulfilled the allowable reduction. The use of the V arrangement gave the greatest reduction of 71.77% while the uniform arrangement was 68.78% and the W arrangement was 68.56%. The use of a nailed slab system as foundation soil reinforcement due to embankment load can reduce settlement effectively.
Keywords
Full Text:
PDFReferences
Departemen Permukiman dan Parasarana Wilayah, “Panduan Geoteknik 1 Proses Pembentukan dan Sifat-sifat Tanah Lunak,” Pedoman Kimpraswil No Pt T-8-2002-B, no. 1, p. 162, 2002.
Pusat Litbang Prasarana Transportasi, “Panduan Geoteknik 4 Desain dan Konstruksi,” Pus. Litbang Prasarana Transp., no. 1, 2001.
H. C. Hardiyatmo, Analisis dan Perancangan Fondasi II, 4th ed. Yogyakarta: Gadjah Mada University Press, 2018.
H. C. Hardiyatmo, Mekanika Tanah 2, 6th ed. Yogyakarta: Gadjah Mada University Press, 2019.
A. Sinha and A. M. Hanna, “3D Numerical Model for Piled Raft Foundation,” Int. J. Geomech., vol. 17, no. 2, p. 04016055, 2017, doi: 10.1061/(asce)gm.1943-5622.0000674.
S. Mali and B. Singh, “3D Numerical Modeling of Large Piled-Raft Foundation on Clayey Soils for Different Loadings and Pile-Raft Configurations,” Stud. Geotech. Mech., no. December, 2019, doi: 10.2478/sgem-2019-0026.
Badan Standarisasi Nasional, “Sni 8460-2017,” Persyaratan Peranc. Geotek., vol. 8460, p. 2017, 2017.
K. C. Foye, P. Basu, and M. Prezzi, “Immediate Settlement of Shallow Foundations Bearing on Clay,” Int. J. Geomech., vol. 8, no. 5, pp. 300–310, 2008, DOI: 10.1061/(ASCE)1532-3641(2008)8:5(300).
A. Puri, H. C. Hardiyatmo, B. Suhendro, and A. Rifa’i, “Perilaku Perkerasan Sistem Pelat Terpaku pada Tanah Lunak,” Prosidin Konf. Nas. Pascasarj. Tek. Sipil 2015, pp. 1689–1699, 2015.
R. B. Brinkgreve, E. Engin, and W. M. Swolfs, Plaxis 3D 2015 Manual, 1st ed. Netherlands: Plaxis, 2015.
D. Waterman, Structural elements in Plaxis, 1st ed. Rotterdam: A.A alkema Publisher, 2006.
H. Zhou, G. Zheng, J. Liu, X. Yu, X. Yang, and T. Zhang, “Performance of embankments with rigid columns embedded in an inclined underlying stratum: centrifuge and numerical modelling,” Acta Geotech., vol. 14, no. 5, pp. 1571–1584, 2019, DOI: 10.1007/s11440-019-00825-7.
F. Azizi, Applied Analyses in Geotechnics. New York: E & FN Spon, 2000.
DOI: https://doi.org/10.21831/inersia.v18i2.48375
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Ekie Aulia Abdurrahman
This work is licensed under a Creative Commons Attribution 4.0 International License.