STUDI EKSPERIMEN PENGGUNAAN VARIASI AGREGAT BANTAK (MERAPI) DAN MATERIAL LOKAL MENGGUNAKAN BITUMEN SHELL (SINGAPORE)PADA LALU LINTAS BERAT

Authors

  • Endaryanta -

DOI:

https://doi.org/10.21831/inersia.v10i1.4430

Abstract

Road engineering is one of the main problem in this country. Rigid pavement frequently defective before load capacity of performance exceeded. Necessary innovation so that the use of material obtained bituminous materialas have good performance. This research caried out of Bantak Merapi as Main materials, combined with local materials Progo and shell Singapore as cementitious materials on flexible pavement to weight load. The Research method used is experiment laboratory with 3 (three) varians (Bantak 100%; Bantak coarse agregat; fine and filler agregat from Progo; coarse and fine agregate Progo; and bantak as filler), each varians consist of 15 samples. Variation of cementitious bitumen are 5%; 5,5%; 6%; and 7% respectively. All specimen have been tested using Marshall laboratory test (dencity; stability; flow; Void in Mix (VIM); Void Filled Bitumen (VFB); Void in Mineral Agregate (VMA); and Marshall Quotient (MQ). Test result showed that values of density; stability; flow; Void In Mix (VIM); Void Filled Bitumen (VFB); Void Minerals Agregat (VMA) and Marshall Quotient were the results 2.16gr/cc; 1230,4kg; 3,42mm; 8,19%; 46,2%; 15,3% dan 376,2 kg/mm respectively. The effective of proportion mix for flexible pavement are Bantak coarse agregate, fine and filler Progo (based on flow values, Void filled bitumen and Marshall Quotient).Kata kunci: Aspal, Bantak, Merapi, Marshall.

Author Biography

Endaryanta -

Jurusan Pendidikan Teknik Sipil dan Perencanaan, FT-UNY

Downloads

How to Cite

-, E. (2015). STUDI EKSPERIMEN PENGGUNAAN VARIASI AGREGAT BANTAK (MERAPI) DAN MATERIAL LOKAL MENGGUNAKAN BITUMEN SHELL (SINGAPORE)PADA LALU LINTAS BERAT. Inersia : Jurnal Teknik Sipil Dan Arsitektur, 10(1). https://doi.org/10.21831/inersia.v10i1.4430

Issue

Vol. 10 No. 1 (2014): Mei

Section

Articles

License

Authors who publish with INERSIA journal agree to the following terms:

  1. Authors retain copyright and grant the INERSIA journal right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Lisensi Creative Commons
INERSIA by https://journal.uny.ac.id/index.php/inersia was distributed under a Creative Commons Attribution 4.0 International License