UJI KINERJA MARSHALL AGREGAT BANTAK MERAPI DENGAN MENGGUNAKAN SERAT POLYPROPYLENE

Authors

  • Faqih Ma'arif, Pramudiyanto

DOI:

https://doi.org/10.21831/inersia.v10i1.4424

Abstract

This research aim to describe of polypropylene and characteristic Optimum Marshall using Bantak Merapi as agregate in the proportion mix. The method used experimental laboratory. The research consist of four varians, that are A (0% PF); B (0,1% PF); C (0,3% PF); and D (0,5% PF), with PF is Polypropylene fibers. The kind of testing are Stability test; penetration test; softening point; flash point and dencity test. Data analysis used descriptive quantitative. Test result showed that the optimum polypropylene fibers is 0,3%; the amount of density; void in mix (VIM); stability; and flow were the result 2,16gr/cm3; 10,85%; 819,03kg; and 2,23mm.Key words: Polypropyelene fibers, Bantak

Author Biography

Faqih Ma'arif, Pramudiyanto

Jurusan Teknik Sipil dan Perencanaan, FT-UNY

Downloads

How to Cite

Pramudiyanto, F. M. (2015). UJI KINERJA MARSHALL AGREGAT BANTAK MERAPI DENGAN MENGGUNAKAN SERAT POLYPROPYLENE. Inersia : Jurnal Teknik Sipil Dan Arsitektur, 10(1). https://doi.org/10.21831/inersia.v10i1.4424

Issue

Vol. 10 No. 1 (2014): Mei

Section

Articles

License

Authors who publish with INERSIA journal agree to the following terms:

  1. Authors retain copyright and grant the INERSIA journal right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Lisensi Creative Commons
INERSIA by https://journal.uny.ac.id/index.php/inersia was distributed under a Creative Commons Attribution 4.0 International License