A COMPARISON OF CNC LATHE MACHINE PROGRAMMING SIMULATION AND CNC LATHE MACHINE PRODUCTION RESULTS

Satrio Adi Nugroho, Universitas Singaperbangsa Karawang, Indonesia
Boni Sena, Universitas Singaperbangsa Karawang, Indonesia
Ujiburrahman Ujiburrahman, Universitas Singaperbangsa Karawang, Indonesia

 10.21831/dinamika.v9i1.73127

Abstract


This study compares the simulation results of a CNC lathe program with the actual production results of a CNC lathe. CNC lathes are used in the manufacturing of precision components for various industrial applications. Simulation of CNC lathe programs can provide an accurate estimate of the production output before the actual production process begins. In this study, we compared dimensional tolerance, geometric accuracy, and surface quality between simulated and actual results. The simulation method used is 2D modeling which involves the calculation of tool trajectories and cutting parameters inputted into the simulation panel. Actual production data was obtained from the measurement of components produced from the CNC lathe. A comparative analysis was conducted to evaluate the extent to which the simulation can predict the actual production results. The results show that, although the simulation can give a good picture, there is still a significant difference between the simulation results and actual production. The findings have practical implications in improving efficiency and accuracy in the planning and production process using CNC lathes.

Keywords


CNC lathe; Holder; S45C stainless carbon steel; Simulation; Production process

Full Text:

75-85 (PDF)

References


A. Ady, S. Sidik, F. Sigit, W. Sigit, P. Priyana, and R. Rusdiyanto, “Pengaruh Variasi Feeding Pada Mesin Bubut Terhadap Tingkat Kekasaran Permukaan Benda Kerja Material Baja ST 41,” vol. 13, no. 1, pp. 11–16.

B. Maryanti, “Pengaruh Ketebalan Pemakanan Terhadap Kekasaran Permukaan Pada Material S45C,” Transmisi, vol. 12, no. 2, pp. 73–78, 2016.

B. Pratowo and G. A. Afrian, “Analisa Pengaruh Penggunaan Pahat Jenis HSS dan Variasi Putaran Pada Proses Pembubutan Baja S45C Terhadap Keefektifan Pahat,” vol. 7, no. 1, pp. 1–13, 2023.

E. Kurniawan, “Analisis Nilai Penyimpangan Mesin Bubut CNC Pada Benda Kerja Plastik Nylon,” J. Teknol. Rekayasa Tek. Mesin, vol. 2, no. 1, pp. 1–5, 2021.

E. Kurniawan, Syaifurrahman, and B. Jekky, “Rancang Bangun Mesin CNC Lathe Mini 2 Axis,” J. Engine Energi, Manufaktur, dan Mater., vol. 4, no. 2, pp. 83–90, 2020, [Online]. Available: https://ejournal.up45.ac.id/index.php/Jurnal_ENGINE/article/view/769

E. Prianto, M.Eng, “Proses Permesinan Cnc Dalam Pembelajaran Simulasi Cnc,” J. Edukasi Elektro, vol. 1, no. 1, pp. 62–68, 2017, doi: 10.21831/jee.v1i1.15110.

F. Adi, “Pengaruh Gerak Pemakanan (Feeding) Terhadap Hasil Kekasaran Permukaan Baja Karbon S45C Pada Proses Mesin CNC Turning SKT 160A,” vol. 6, no. 1, pp. 81–90, 2023, doi: 10.31004/jutin.v6i1.14579.

H. B. Soemardi and Rahbini, “Analisis Waktu Pemotongan dengan Program Inkrimental dan Absolut pada Mesin Bubut CNC TU-2A,” J. Flywheel, vol. 8, no. 2, pp. 8–13, 2017.

H. B. Soemardi and Rahbini, “Analisis Waktu Pemotongan dengan Program Inkrimental dan Absolut pada Mesin Bubut CNC TU-2A,” J. Flywheel, vol. 8, no. 2, pp. 8–13, 2017.

M. Amala and S. Widyanto, “Pengembangan Perangkat Lunak Sistem Operasi Mesin Milling CNC Trainer,” J. Tek. Mesin, vol. 2, no. 3, pp. 204–210, 2014.

M. M. Rozaq and I. Iswanto, “Analisa Pengaruh Gerak Makan Dan Putaran Spindel Terhadap Keausan Pahat Pada Proses Bubut Konvensional,” R.E.M. (Rekayasa Energi Manufaktur) J., vol. 2, no. 1, p. 13, 2017, doi: 10.21070/r.e.m.v2i1.842.

M. N. A. Masalik and D. Susandi, “Proses Pembuatan Bhusing Inner Free Cutting dengan Menggunakan Mesin Bubut CNC DMC dan Mesin Bubut Milling,” Pros. SENIATI, vol. 6, no. 2, pp. 391–398, 2022, doi: 10.36040/seniati.v6i2.4945.

M. R. E. A. Erista Budi Safitri, “Implementasi Kontroler P-PI KaskadeuntukMeningkatkan Keakuratan Mesin Bubut CNC,” J. Tek. Its, vol. 1, no. 1, pp. 2301–9271, 2012.

M. Yanis, “Analisis Profil Kebulatan Untuk Menentukan Kesalahan Geometrik Pada Pembuatan Komponen Menggunakan Mesin Bubut Cnc,” J. Rekayasa Sriwij., vol. 19, no. 1, pp. 50–58, 2018, [Online]. Available: download.portalgaruda.org/article.php?article=141284&val=5845

R. Mulyadi, Y. Oktriadi, and R. Muhamad, “STUDI KASUS NILAI KEKASARAN PERMUKAAN MATERIAL BAJA S45C PADA PROSES PEMESINAN CNC BUBUT,” vol. 9, 2022.

Sudiadi, “386-811-1-Pb,” 2018.

Veny Selviyanty. YH, “PENGARUH KARAKTER BAJA S45C PADA PROSES QUENCH,” vol. 4, no. 1, pp. 21–30, 2021.

Y. Setyoadi, K. Latifah, J. T. Mesin, and J. Informatika, “Integrasi Software CAD-CAM dalam Sistem Operasi Mesin Bubut CNC,” pp. 149–159.




DOI: https://doi.org/10.21831/dinamika.v9i1.73127

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Dinamika Vokasional Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Lisensi Creative Commons 

Jurnal Dinamika Vokasional Teknik Mesin by http://journal.uny.ac.id/index.php/dynamika was distributed under a Creative Commons Attribution 4.0 International License.


 

 

 

in collaboration with:

 

 

View My Stats