THE DEVELOPMENT OF THE COURSE MODULE OF MANUFACTURING ENGINEERING DRAWING FOR VOCATIONAL STUDENTS

Andrian Riyadi, Universitas Negeri Yogyakarta, Indonesia
Heri Wibowo, Universitas Negeri Yogyakarta, Indonesia

 10.21831/dinamika.v8i2.66820

Abstract


This research developed a learning modules that fit the curriculum and determine the level of eligibility to be applied in learning of Manufacturing Drawing Engineering. This research applied  a Research & Development methode with the 4D model from Thiagaradjan, that are Define, Design, Develop, and Disseminate. The developed course module was validated by material and media experts which is presented using Likert scale. The results of the validation from the lecturers as material experts scored 3,33 in very feasible category, the validation from the lecturers as media experts scored 3,35 in very feasible category, the validation from the teachers as material experts scored 3,04 in feasible category, and the validation from teachers as media experts scored 3,35 in very feasible category. Products that have been developed and revised were tested on 30 students of XI class in Mechanical Engineering department of SMK Negeri 3 Yogyakarta by distributing evaluation questionnaires to find out the responses of students. The product got a score 3,58 from the students in very feasible category. The module received a very feasible evaluation from lecturers as a material and media experts, teachers as a media experts, and students. The module received a feasible evaluation from teachers as a material experts.

Keywords


Learning; Likert Scale; Manufacturing Drawing Engineering; Module; Research and Development

Full Text:

168-176 (PDF)

References


Aeni, S., Sutrisno., & Mushafanah, Q. (2019). Pengembangan Media KOPER (Kotak Permainan) pada Tema 7 Kebersamaan. Jurnal Penelitian dan Pengembangan Pendidikan, 3(3), 159-165. https://doi.org/10.23887/jppp.v3i3.18158

Arifin, Z. (2012). Evaluasi Pembelajaran (Rev Ed.). Remaja Rosdakarya.

Gafurov, N. M. (2021). Educational Unity and Student Development in the Process of Physical Education. International Journal on Economics, Finance, and Sustainable Development, 3(3), 162-167. https://dx.doi.org/10.31149/ijefsd.v3i3.1470

Muzyka, O., Lopatiuk, Y., Belinska, T., Belozerskaya, A., & Shvets, I. (2021). Modern Aesthetic Education and its Further Directions. Linguistics and Culture Review, 5(S4), 12-21. https://dx.doi.org/10.21744/lingcure.v5nS4.1537

Prasetyo, W. H. (2016). Pengembangan Media Pembelajaran Gambar Teknik untuk Siswa Kelas X di SMK Negeri 2 Wonosari. Jurnal Pendidikan Vokasional Teknik Mesin, 4(4), 253-260. https://doi.org/10.21831/teknik%20mesin.v4i4.5080

Prastyawati, L. & Hanum, F. (2015). Pengembangan Model Pembelajaran Multikultural Berbasis Proyek di SMA. Jurnal Pendidikan IPS, 2(1), 21-29. https://dx.doi.org/10.21831/hsjpi.v2i1.4600

Preda, A. (2020). A New Teaching Method of Improving Capacity of Visualisation and Understanding of Future Mechanical Engineers. Technium Social Sciences Journal, 3, 162-166. https://dx.doi.org/10.47577/tssj.v3i1.97

Setiawati, S. M. (2018). Telaah Teoritis: Apa Itu Belajar?. Jurnal Bimbingan dan Konseling FKIP UNIPA, 35(1), 31-46. https://doi.org/10.36456/helper.vol35.no1.a1458

Setiyadi, M. W., Ismail., & Gani, H. A. (2017). Pengembangan Modul Pembelajaran Biologi Berbasis Pendekatan Saintifik untuk Meningkatkan Hasil Belajar Siswa. Journal of Education Science and Technology, 3(2), 102-112. https://doi.org/10.26858/est.v3i2.3468

State Secretary of the Republic of Indonesia. (2003). Law number 20 of 2003 Concerning the National Education System. Indonesian Government. https://peraturan.bpk.go.id/Home/Details/43920/uu-no-20-tahun-2003

Sujana, I. W. C. (2019). Fungsi dan Tujuan Pendidikan Indonesia. Jurnal Pendidikan Dasar, 4(1), 29-39. https://doi.org/10.25078/aw.v4i1.927

Suroto. (2015). Penggunaan Model Pembelajaran Explicit Instruction dengan Trainer PLC untuk Meningkatkan Prestasi Belajar Merakit Sistem PLC. Jurnal Pendidikan Teknologi dan Kejuruan, 22(3), 316-323. https://doi.org/10.21831/jptk.v22i3.6838

Suyarova, S. E., Ravshanova, N. K., Yakubova, l. G., & Abdullaeva, S. S. (2020). Enriching the Quality of Education in Uzbekistan and Strengthening the Legal Framework. International Journal on Economics, Finance, and Sustainable Development, 2(11), 7-9. https://dx.doi.org/10.31149/ijefsd.v2i11.794

Thiagarajan, S., Semmel, D. S., & Semmel, M. I. (1974). Instructional Development for Training Teachers of Expectional Childres. University of Minnesota.

Umar, H. (2002). Metode Penelitian dalam Aplikasi Pemasaran. Gramedia Pustaka Utama.

Yunita, I. E., & Hakim, L. (2014). Pengembangan Modul Berbasis Pembelajaran Kontekstual Bermuatan Karakter pada Materi Jurnal Khusus. Jurnal Pendidikan Akuntansi, 2(1), 1-6. https://ejournal.unesa.ac.id/index.php/jpak/article/view/32727/29498




DOI: https://doi.org/10.21831/dinamika.v8i2.66820

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Jurnal Dinamika Vokasional Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Lisensi Creative Commons 

Jurnal Dinamika Vokasional Teknik Mesin by http://journal.uny.ac.id/index.php/dynamika was distributed under a Creative Commons Attribution 4.0 International License.


 

View My Stats