EXPERIMENTAL STUDY OF THE EFFECT OF PLATE CURVES ON SOLAR STOVE

Lohdy Diana, Politeknik Elektronika Negeri Surabaya, Indonesia
Arrad Ghani Safitra, Politeknik Elektronika Negeri Surabaya, Indonesia
Agung Dwi Cahyo, Politeknik Elektronika Negeri Surabaya, Indonesia

Abstract


In the midst of various other energy needs, cooking has received special attention in energy consumption due to the scarcity of fuel for cooking which is currently commonly used by the community. The scarcity is directly proportional to the increase in fuel prices. Currently, many alternative energies are being developed, one of which is cooking using solar power. In this study, an experimental study of the effect of the number of plate bends on the solar cooker carried out. This study aims to determine the effect of the number of curvatures of the plate on the performance of a solar cooker. The number of curved aluminum plates in the solar cooker was expected to be able to expand the area of absorption of solar heat, thereby increasing the temperature of the air inside the solar cooker. The solar cooker also adds an absorbent plate in the shape of a flower-like arc. Variations in the number of arches to be studied are 6, 8, and 12 arches. The method used in this study is an experiment in actual conditions. Research result show solar stoves with 12 curved walls have a higher temperature increase and heat absorption compared to 6 and 8 arches. This is because 12 arches have a wider solar heat absorption area.


Keywords


Energy; Temperature; Solar stove; Thermal

Full Text:

42-48 (PDF)

References


Abu-Hamdeh, N. H. & Alnefaie, K. A. (2019). Assessment of thermal performance of pcm in latent heat storage system for different applications. Solar Energy, 177, 317-323. https://doi.org/10.1016/j.solener.2018.11.035.

Chaudhary, R. & Yadav, A. (2020). Twin vessel solar cook stove for the simultaneous cooking of two different cooking articles. Solar Energy, 208, 688-696. https://doi.org/10.1016/j.solener.2020.08.032.

Diana, L., Safitra, A.G., Ichsani, D., Nugroho, S. (2020). CFD analysis of airflow through prism obstacles inside solar air heater channel. Journal of Physics: Conference Series 2020, 1577(1), 012038. https://iopscience.iop.org/article/10.1088/1742-6596/1577/1/012038/meta.

Hu, M., Zhao, B., Ao, X., Ren, X., Cao, J., Wang, Q., Su, Y., & Pei, G. (2020). Performance assessment of a trifunctional system integrating solar pv, solar thermal, and radiative sky cooling. Applied Energy, 260, 114167.

Incropera, F. P. (2011). Fundamental of Heat and Mass Transfer (7th ed.). John Wiley & Sons, Inc.

Iranmanesh Masoud dan Jahromi Mohammad Saleh Barghi, (2020). Cfd modelling and evaluation the performance of a solar cabinet dryer equipped with evacuated tube solar collector and thermal storage system. Renewable Energy, 145. https://doi:10.1016/j.renene.20196.038.

Kaiyan, H., Hongfei, Z., Tao, T., & Xiaodi, X. (2009). Experimental investigation of high temperature congregating energy solar stove with sun light funnel. Energy Conversion and Management, 50, 3051-3055. https://doi.org/10.1016/j.enconman.2009.08.009.

Magendran, S. S., Khan, F. S. A., Mubarak, N.M., Vaka, M., Walvekar, R., Khalid, M., Abdullah E.C., Nizamuddin, S., & dan Karri, R. R. (2019). Synthesis of organic phase change materials (pcm) for energy storage applications: a review. Nano-Structures & Nano-Objects, 20, 100399. https://doi.org/10.1016/j.nanoso.2019.100399.

Neto, R. V. P., Souza, L. G. M. D., Lima, J. C. D., Souza, L. G. V. M. D., & Mendes, E. V. (2021). Theoretical-experimental study of a box-type solar oven made from disused recyclable elements. Solar Energy, 230, 732-746.

Watkins, T., Arroyo, P., Perry, R., Wang, R., Arriaga, O., Fleming, M., O'Day, C., Stone, I., Sekerak, J., Mast, D., Hayes, N., Keller, P., & Schwartz, P. (2017). Insulated solar electric cooking-tomorrow's healthy affordable stoves. Development Engineering, 2, 47-52. https://doi.org/10.1016/j.deveng.2017.01.001.

Zafar, H. A., Badar, A. W., Butt, F. S., Khan, M. Y., & Siddiqui, M. S. (2019). Numerical




DOI: https://doi.org/10.21831/dinamika.v8i1.53487

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Jurnal Dinamika Vokasional Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Lisensi Creative Commons 

Jurnal Dinamika Vokasional Teknik Mesin by http://journal.uny.ac.id/index.php/dynamika was distributed under a Creative Commons Attribution 4.0 International License.


 

View My Stats