Email the author Analisis Perbandingan Metode Pengelasan untuk Mengendalikan Distorsi dan Tegangan Sisa – Review
Abstract
Distortion and residual stress can have undesirable effects on weldments, such as repair work and higher fabrication costs. This study compares welding methods in reducing distortion and residual stress to obtain advantages and disadvantages. The study focused on reviewing several journals from previous research that focused on comparing welding methods. The results show that the Dynamically Controlled Low-Stress No Distortion (DC-LSND) welding method has the most significant ability to reduce distortion and residual stress and does not reduce the weld joint's fatigue resistance. The welding methods of static thermal tensioning (STT) and Transient thermal tensioning (TTT) can significantly decrease distortion and residual stress. They can improve the fatigue resistance of welded joints. The Double Side Arc Welding (DSAW) method effectively reduces distortion. However, the application in large construction welds is difficult to achieve.
Distorsi dan tegangan sisa memberikan pengaruh yang tidak diinginkan pada pengelasan seperti perlunya pekerjaan perbaikan dan meningkatnya biaya fabrikasi. Tujuan penelitian adalah membandingkan metode pengelasan untuk mereduksi distorsi dan tegangan sisa untuk memperoleh kelebihan dan kekurangan. Metode penelitian dilakukan dengan review beberapa literatur jurnal hasil penelitian sebelumnya yang difokuskan pada perbandingan metode pengelasan dalam mereduksi distorsi dan tegangan sisa. Hasil penelitian menunjukkan metode las dynamically controlled low stress no distortion (DC-LSND) memiliki kemampuan mereduksi distorsi dan tegangan sisa paling efektif dan tidak menurunkan ketahanan fatik sambungan las, metode las static thermal tensioning (STT) dan transient thermal tensioning (TTT) memiliki kemampuan mereduksi distorsi dan tegangan sisa dengan signifikan serta mampu meningkatkan ketahanan fatik sambungan las, metode las doublé side arc welding (DSAW) efektif mereduksi distorsi namun sulit diterapkan pada pengelasan konstruksi yang besar.
Keywords
Full Text:
PDFReferences
Conrardy, C., Huang, D., Harwig, D., Pong, P., Kvidahl, L., 2006, Practical welding techniques to minimize distortion in lightweight ship structures, Journal of ship Production vol 22, pp. 239-247.
Growth Performance of MIG AA5083 Welds, Materials and Design vol. 99, pp. 273–283.
Holder R., Larkin, N., Li, H., Kuzmikova, L., and Pan, Z., 2011, Development of a DC-LSND welding process for GMAW on DH-36 Steel, 56th WTIA Annual Converence 2011.
Huang, T.D, Dong, P., Decan, L.A., and Harwig, D.D., 2003, Residual Stress and Distortions in Lightweight ship panel structures, Technology Review Journal.
Ilman, M.N., Kusmono, Iswanto, P.T., 2013, Fatigue crack growth rate behavior of friction-stir aluminium alloy AA 2024-T3 welds under transient thermal tensioning, Materials and Design, pp. 235-243.
Ilman, M.N., Muslih, M.R., Subeki, N., Wibowo, H., 2016, Mitigating Distortion and Residual Stress by Static Thermal Tensioning to Improve Fatigue Crack Mcpherson, N.A., 2010, Correcting thin-plate distortion in ship building, Welding Journal.
Kala, S.R., Siva Prasad, N., and Phanikumar, G., 2014, Studies on multipass welding with trailing heat sink consideringphase transformation, Journal of Materials Processing Technology, vol 214, p : 1228-1235.
Mochizuki, 2007, Weld Distortion Control During Welding Process with Reverse-side Heating, Journal of Engineering Materials and Technology vol 29, ASME.
Radaj, D., 1992, Heat Effects of Welding : Temperature field, Residual Stress and Distortion, Springer, Verlag-Berlin.
Shen, C., 2013, Low Distortion Welding for Shipbuilding Industry, Master of Engineering Thesis, Mechanical, Material and Mechatronic Engineering, University of Wollongong.
Spooner, S., David, S.A., Wang, X.L., Hubbard, C.R., Holden, T.M., and Root, J.H., 2008, Effect of vibratory stress relief during welding of thick stainless steel plate, International journal of Engineering Science and Technology.
Subeki, N., Ilman, M.N., Iswanto, P.T., 2017, The Effect of Heating Temperature in Static Thermal Tensioning ( STT ) Welding on Mechanical Properties and Fatigue Crack Propagation Rate of FCAW in Steel A 36, International Conference on Eng. Sci. and Nanotech,30057.
Souto, J., Ares, E., Alegre, P., 2015, Procedure in Reduction of Distortion in Welding Process by High Temperature Thermal Transient Tensioning, Procedia Engineering vol. 132, pp. 732–739.
Triyono, Sukanto, H., Muhayat, M., dan Sutiyono, 2014, Effect of Stretching during Welding Process on the Weldability of Dissimillar Metals Resistance Spot Welded between Carbon Steel and Low Nickel Stainless Steel, Advanced Materials Research, vol 894, pp. 206-211.
Wibowo, H., Ilman, M.N., Iswanto, P.T., and Muslih, M.R., 2019, Reducing Distortion and Residual StressUsing Dynamically Controlled Low Stress No Distortion and Its Influence on Fatigue Crack Growth Properties of Steel Welded Joints, Transactions of the Indian Institute of Metals.
Xu, J., 2007, Effect of fibratory weld conditioning on the residual stresses and distortion in multipass girth-butt welded pipes, International Journal of Pressure Vessels and Piping.
Zhang, H., Yang, C., Zong, J., Chen, Y., and Chen, S., 2009, The effect of DSAW on preheating temperature in welding thick plate of high-strength low-alloy steel, International Journal of Advanced Manufacturing Technology.
DOI: https://doi.org/10.21831/dinamika.v5i2.34782
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Jurnal Dinamika Vokasional Teknik Mesin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Jurnal Dinamika Vokasional Teknik Mesin by http://journal.uny.ac.id/index.php/dynamika was distributed under a Creative Commons Attribution 4.0 International License.
View My Stats